Ask / Submit

Revision history [back]

click to hide/show revision 1
initial version

posted 2014-09-17 11:27:48 +0300

moe gravatar image

Hey,

i had a simular Problem with my Jolla... So i designed a protection / antislip-shaped other half:

(i am not allowed to show photos below karma 10 so see the link:)

https://www.dropbox.com/s/npbgr3wl1hnbew1/jolla_the_other_half_kt.jpg?dl=0

https://www.dropbox.com/s/gq8pihoc3w556r6/jolla_the_other_half_kt2.jpg?dl=0

i ordered a rapid-prototyping model made of this.

as soon as it arrives from the manufacturer i'll send some more pictures.

who ever likes this can have the .stl model of this prototype.

Hey,

i had a simular Problem with my Jolla... So i designed a protection / antislip-shaped other half:

(i am not allowed to show photos below karma 10 so see the link:)image description

https://www.dropbox.com/s/npbgr3wl1hnbew1/jolla_the_other_half_kt.jpg?dl=0

https://www.dropbox.com/s/gq8pihoc3w556r6/jolla_the_other_half_kt2.jpg?dl=0image description

i ordered a rapid-prototyping model made of this.

as soon as it arrives from the manufacturer i'll send some more pictures.

who ever likes this can have the .stl model of this prototype.

Hey,

i had a simular Problem with my Jolla... So i designed a protection / antislip-shaped other half:

image description

image description

i ordered a rapid-prototyping model made of this.

as soon as it arrives from the manufacturer i'll send some more pictures.

who ever likes this can have the .stl model of this prototype.

you can download it here (it is not tested so far...):

https://www.dropbox.com/s/k8i1z8qhawg9m82/toh-kt-as-build.stl?dl=0

Hey,

i had a simular Problem with my Jolla... So i designed a protection / antislip-shaped other half:

image description

image description

i ordered a rapid-prototyping model made of this.

as soon as it arrives from the manufacturer i'll send some more pictures.

who ever likes this can have the .stl model of this prototype.

you can download it here (it is not tested so far...):

https://www.dropbox.com/s/k8i1z8qhawg9m82/toh-kt-as-build.stl?dl=0

UPDATE:

The Other Half arrived Today!

i Have to admit, that i had to do a little correction - due to i did not think off the phone expanding slightly with its front (rounded front). The Plug for the 3,5 audio can't be used - the hole is too small :-(

but get an impression here:

image description

image description

image description

image description

image description

image description

image description

i will upload a 3D model with the adjustments as soon as the job is done.

have fun