Ask / Submit

Revision history [back]

click to hide/show revision 1
initial version

posted 2015-07-01 09:09:22 +0200

For PPTP/MPPE users:

Install pptp&pptp-setup from warehouse

Links: https://openrepos.net/content/ketilk/pptp https://openrepos.net/content/ketilk/pptp-setup

Use these commands in terminal(devel-su needed)

 pptpsetup --create vpn --server XXX.XXX.XXX.XX --username jolla --password jolla --encrypt --start

If success ,will show like this:

Using interface ppp0

Connect: ppp0 <–> /dev/pts/2

CHAP authentication succeeded

MPPE 128-bit stateless compression enabled

local  IP address 192.168.111.103

remote IP address 192.168.111.100

Then,add ppp0 to route

route add -net 0.0.0.0 dev ppp0

Note:Everytime your network changed,you should execute these commands:

pppd call vpn

route add -net 0.0.0.0 dev ppp0

For PPTP/MPPE users:

Install pptp&pptp-setup ppp&pptp&pptp-setup from warehouse

Links: Links:

https://openrepos.net/content/ketilk/ppp

https://openrepos.net/content/ketilk/pptp

https://openrepos.net/content/ketilk/pptp-setup

Use these commands in terminal(devel-su needed)

 pptpsetup --create vpn --server XXX.XXX.XXX.XX --username jolla --password jolla --encrypt --start

If success ,will show like this:

Using interface ppp0

Connect: ppp0 <–> /dev/pts/2

CHAP authentication succeeded

MPPE 128-bit stateless compression enabled

local  IP address 192.168.111.103

remote IP address 192.168.111.100

Then,add ppp0 to route

route add -net 0.0.0.0 dev ppp0

Note:Everytime your network changed,you should execute these commands:

pppd call vpn

route add -net 0.0.0.0 dev ppp0