Speaker stopped working on Aqua Fish [not relevant]
asked 2016-10-04 12:33:20 +0300
I've had an Aqua Fish for about a month now, but today the loud speaker seems to have stopped working - I wondered if something was up when I slept through my alarm but didn't think much of it, but later when someone sent me a message and the phone made no noise I realised that there was definitely something wrong. I've made sure that it is not on silent, tried rebooting, cold booting, tried the music app, etc. Headphones still work, as does the sound when on a call - it seems that it is just the loud speaker that is broken.
Has anyone else had this happen to them? Before I look into returning it I'd like to check that it isn't just a software issue - is there a way I can confirm that the phone is definitely trying to use the speaker - that it doesn't still think that headphones are plugged in or something? Any way to check that the sound hardware is configured correctly through software?
Update: Also tried resetting to factory defaults, but it did not help.
Kernel log below.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.49+0.0.52.3 (abuild@es-17-21) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Wed Aug 10 10:05:29 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8909 (Flattened Device Tree), model: Qualcomm Technologies, Inc. MSM8909 QRD SKUE
[ 0.000000] cma: Found external_image__region@0, memory base 0x87a00000, size 6 MiB, limit 0xffffffff
[ 0.000000] cma: Found modem_adsp_region@0, memory base 0x88000000, size 85 MiB, limit 0xffffffff
[ 0.000000] cma: Found pheripheral_region@0, memory base 0x8d500000, size 5 MiB, limit 0xffffffff
[ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 6 MiB, limit 0x90000000
[ 0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
[ 0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 12 MiB, limit 0xffffffff
[ 0.000000] cma: CMA: reserved 6 MiB at 0x87a00000 for external_image_mem
[ 0.000000] cma: CMA: reserved 85 MiB at 0x88000000 for modem_adsp_mem
[ 0.000000] cma: CMA: reserved 5 MiB at 0x8d500000 for peripheral_mem
[ 0.000000] cma: CMA: reserved 8 MiB at 0x8f800000 for venus_qseecom_mem
[ 0.000000] cma: CMA: reserved 4 MiB at 0xff800000 for audio_mem
[ 0.000000] cma: CMA: reserved 12 MiB at 0x83000000 for cont_splash_mem
[ 0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 499711
[ 0.000000] free_area_init_node: node 0, pgdat c11e7340, node_mem_map c3c00000
[ 0.000000] Normal zone: 1926 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2682 pages used for memmap
[ 0.000000] HighMem zone: 305151 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 13 pages/cpu @c4e4b000 s32320 r8192 d12736 u53248
[ 0.000000] pcpu-alloc: s32320 r8192 d12736 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 497785
[ 0.000000] Kernel command line: sched_enable_hmp=1 selinux=0 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk zram.num_devices=4 androidboot.emmc=true androidboot.serialno=3507d8e9 androidboot.baseband=msm mdss_mdp3.panel=1:dsi:0:qcom,mdss_dsi_nt35521_720p_dj_video:1:none
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1924444K/1998844K available (10991K kernel code, 1009K rwdata, 4116K rodata, 1223K init, 1288K bss, 74400K reserved, 1216508K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf5800000 - 0xff000000 ( 152 MB)
[ 0.000000] lowmem : 0xcda00000 - 0xf5800000 ( 638 MB)
[ 0.000000] vmalloc : 0xc7a00000 - 0xcda00000 ( 96 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc7a00000 ( 122 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0fc0c80 (16100 kB)
.init : 0xc1000000 - 0xc1131e40 (1224 kB)
.data : 0xc1132000 - 0xc122e67c (1010 kB)
.bss : 0xc122e740 - 0xc1370988 (1289 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] HMP scheduling enabled.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.002994] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.003068] pid_max: default: 32768 minimum: 301
[ 0.003320] Security Framework initialized
[ 0.003451] Mount-cache hash table entries: 512
[ 0.004695] Initializing cgroup subsys devices
[ 0.004741] Initializing cgroup subsys freezer
[ 0.004778] Initializing cgroup subsys net_cls
[ 0.004813] Initializing cgroup subsys blkio
[ 0.004847] Initializing cgroup subsys perf_event
[ 0.004897] Initializing cgroup subsys net_prio
[ 0.005022] CPU: Testing write buffer coherency: ok
[ 0.005092] ftrace: allocating 32966 entries in 97 pages
[ 0.042439] ------------[ cut here ]------------
[ 0.042515] WARNING: at /home/abuild/rpmbuild/BUILD/kernel/kernel/trace/ftrace.c:1723 ftrace_bug+0xec/0x174()
[ 0.042577] Modules linked in:
[ 0.042617] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.49+0.0.52.3 #1
[ 0.042690] [<c010d758>] (unwind_backtrace+0x0/0x128) from [<c010abe8>] (show_stack+0x20/0x24)
[ 0.042763] [<c010abe8>] (show_stack+0x20/0x24) from [<c0a3cb08>] (dump_stack+0x20/0x28)
[ 0.042836] [<c0a3cb08>] (dump_stack+0x20/0x28) from [<c011cf44>] (warn_slowpath_common+0x5c/0x7c)
[ 0.042910] [<c011cf44>] (warn_slowpath_common+0x5c/0x7c) from [<c011d168>] (warn_slowpath_null+0x2c/0x34)
[ 0.042985] [<c011d168>] (warn_slowpath_null+0x2c/0x34) from [<c019aa68>] (ftrace_bug+0xec/0x174)
[ 0.043057] [<c019aa68>] (ftrace_bug+0xec/0x174) from [<c019b05c>] (ftrace_process_locs+0x438/0x58c)
[ 0.043131] [<c019b05c>] (ftrace_process_locs+0x438/0x58c) from [<c100ed98>] (ftrace_init+0xb8/0x1a4)
[ 0.043204] [<c100ed98>] (ftrace_init+0xb8/0x1a4) from [<c1000ad0>] (start_kernel+0x330/0x398)
[ 0.043274] [<c1000ad0>] (start_kernel+0x330/0x398) from [<80008070>] (0x80008070)
[ 0.043370] ---[ end trace da227214a82491b7 ]---
[ 0.043408] ftrace faulted on writing [<c0100488>] asm_do_IRQ+0x10/0x1c
[ 0.043929] /cpus/cpu@0 missing clock-frequency property
[ 0.043991] /cpus/cpu@1 missing clock-frequency property
[ 0.044045] /cpus/cpu@2 missing clock-frequency property
[ 0.044101] /cpus/cpu@3 missing clock-frequency property
[ 0.044146] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.044290] Setting up static identity map for 0xc0a45510 - 0xc0a45568
[ 0.045876] ftrace: Allocated trace_printk buffers
[ 0.066528] MSM Memory Dump base table set up
[ 0.066612] MSM Memory Dump apps data table set up
[ 0.066685] Configuring XPU violations to be fatal errors
[ 0.068575] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.070528] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.072330] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.072530] Brought up 4 CPUs
[ 0.072678] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.072723] CPU: All CPU(s) started in SVC mode.
[ 0.074101] devtmpfs: initialized
[ 0.106902] pinctrl core: initialized pinctrl subsystem
[ 0.107481] regulator-dummy: no parameters
[ 0.109402] NET: Registered protocol family 16
[ 0.113457] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.181383] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[ 0.192639] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
[ 0.197305] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
[ 0.197887] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
[ 0.206057] gpiochip_find_base: found new base at 911
[ 0.206222] gpiochip_add: registered GPIOs 911 to 1023 on device: msm_tlmm_gpio
[ 0.207923] msm_smem_init: unable to create logging context
[ 0.211036] KPI: Bootloader start count = 13296
[ 0.211081] KPI: Bootloader end count = 85394
[ 0.211115] KPI: Bootloader display count = 78533
[ 0.211151] KPI: Bootloader load kernel count = 2515
[ 0.211189] KPI: Kernel MPM timestamp = 131596
[ 0.211223] KPI: Kernel MPM Clock frequency = 32768
[ 0.211281] socinfo_print: v10, id=245, ver=2.0, raw_id=2400, raw_ver=1, hw_plat=11, hw_plat_ver=65536
accessory_chip=0, hw_plat_subtype=9, pmic_model=65549, pmic_die_revision=65537 foundry_id=2 serial_number=87945635
[ 0.211399] msm_smd_init: unable to create SMD logging context
[ 0.211440] msm_smd_init: unable to create SMSM logging context
[ 0.212478] smd_channel_probe_worker: allocation table not initialized
[ 0.212709] smd_channel_probe_worker: allocation table not initialized
[ 0.220696] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.220765] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.223255] pm8909_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.224007] pm8909_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.224702] pm8909_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.225454] pm8909_s1_corner_so: 0 <--> 0 mV at 0 mV normal idle
[ 0.226202] pm8909_s2: 1850 mV normal idle
[ 0.226903] pm8909_l1: 1000 mV normal idle
[ 0.227631] pm8909_l2: 1200 mV normal idle
[ 0.228393] pm8909_l3: 500 <--> 1350 mV at 0 mV normal idle
[ 0.229077] pm8909_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.229765] pm8909_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
[ 0.230488] pm8909_l4: 1800 mV normal idle
[ 0.231214] pm8909_l5: 1800 mV normal idle
[ 0.231956] pm8909_l6: 1800 mV normal idle
[ 0.232664] pm8909_l7: 1800 mV normal idle
[ 0.233354] pm8909_l7_ao: 1800 mV normal idle
[ 0.234005] pm8909_l7_so: 1800 mV normal idle
[ 0.234744] pm8909_l8: 2850 <--> 2900 mV at 2850 mV normal idle
[ 0.235500] pm8909_l9: 3000 <--> 3300 mV at 3000 mV normal idle
[ 0.236223] pm8909_l10: 1225 <--> 1300 mV at 1225 mV normal idle
[ 0.236990] pm8909_l11: 1800 <--> 2950 mV at 1800 mV normal idle
[ 0.237715] pm8909_l12: 1800 <--> 2950 mV at 1800 mV normal idle
[ 0.238569] pm8909_l13: 3075 mV normal idle
[ 0.239344] pm8909_l14: 1800 <--> 3000 mV at 1800 mV normal idle
[ 0.240080] pm8909_l15: 1800 <--> 3000 mV at 1800 mV normal idle
[ 0.240835] pm8909_l17: 2800 <--> 2850 mV at 2800 mV normal idle
[ 0.241593] pm8909_l18: 2700 mV normal idle
[ 0.245852] msm-thermal qcom,msm-thermal.35: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
[ 0.245957] msm-thermal qcom,msm-thermal.35: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
[ 0.246052] msm-thermal qcom,msm-thermal.35: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
[ 0.246145] msm-thermal qcom,msm-thermal.35: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[ 0.246994] msm-thermal qcom,msm-thermal.35: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
[ 0.249048] sps:sps is ready.
[ 0.259517] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
[ 0.274057] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
[ 0.275478] clock-a7 b011050.qcom,clock-a7: Speed bin: 0 PVS Version: 0
[ 0.314519] bio: create slab <bio-0> at 0
[ 0.317883] tp_power: 2800 mV
[ 0.319633] SCSI subsystem initialized
[ 0.320014] usbcore: registered new interface driver usbfs
[ 0.320140] usbcore: registered new interface driver hub
[ 0.320395] usbcore: registered new device driver usb
[ 0.321367] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[ 0.321520] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.321585] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.323489] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[ 0.323640] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.323705] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.324615] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
[ 0.324746] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.324810] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.326984] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[ 0.327124] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.327188] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.330425] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
[ 0.330567] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.330632] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.335709] media: Linux media interface: v0.10
[ 0.335822] Linux video capture interface: v2.00
[ 0.336201] BATTERY: batterydata_init: Battery-data device created!
[ 0.339217] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 0.339485] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
[ 0.339721] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
[ 0.340094] ION heap system created
[ 0.340259] ION heap kmalloc created
[ 0.340296] ION heap qsecom created at 0x8f800000 with size 600000
[ 0.340335] ION heap audio created at 0xff800000 with size 314000
[ 0.340375] ION heap pil_2 created at 0x88000000 with size 5500000
[ 0.340935] msm_bus_fabric_init_driver
[ 0.341228] msm_bus_device 580000.ad-hoc-bus: Dev 0
[ 0.341270] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.341365] msm_bus_device 580000.ad-hoc-bus: Dev 4096
[ 0.341404] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.341441] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.341524] msm_bus_device 580000.ad-hoc-bus: Dev 1024
[ 0.341562] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.341600] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.341694] msm_bus_device 580000.ad-hoc-bus: Dev 2048
[ 0.341733] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.345052] msm_bus_init_clk: Valid node clk node 0 ctx 0
[ 0.345078] msm_bus_init_clk: Valid node clk node 0 ctx 1
[ 0.345189] msm_bus_init_clk: Valid node clk node 4096 ctx 0
[ 0.345211] msm_bus_init_clk: Valid node clk node 4096 ctx 1
[ 0.345310] msm_bus_init_clk: Valid node clk node 1024 ctx 0
[ 0.345332] msm_bus_init_clk: Valid node clk node 1024 ctx 1
[ 0.345359] msm_bus_init_clk: Valid Iface clk node 1024
[ 0.345454] msm_bus_init_clk: Valid node clk node 2048 ctx 0
[ 0.345484] msm_bus_init_clk: Valid node clk node 2048 ctx 1
[ 0.360694] gdsc_venus: no parameters
[ 0.361088] gdsc_mdss: no parameters
[ 0.361436] gdsc_vfe: no parameters
[ 0.361740] gdsc_oxili_gx: no parameters
[ 0.362061] gdsc_venus_core0: fast normal
[ 0.363071] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 0.363948] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
[ 0.365566] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at c7e20000, with 2 ctx banks
[ 0.371393] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at c7e80000, with 22 ctx banks
[ 0.372902] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[ 0.373090] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[ 0.373272] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
[ 0.373450] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[ 0.373621] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[ 0.373795] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
[ 0.373972] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[ 0.374157] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[ 0.374330] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[ 0.374508] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[ 0.374682] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
[ 0.374861] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
[ 0.375044] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
[ 0.375221] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[ 0.375400] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[ 0.375577] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[ 0.375765] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[ 0.375947] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[ 0.376125] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[ 0.376301] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[ 0.376479] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[ 0.376657] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
[ 0.376831] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
[ 0.376924] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
[ 0.377856] Advanced Linux Sound Architecture Driver Initialized.
[ 0.378641] Bluetooth: Core ver 2.16
[ 0.378723] NET: Registered protocol family 31
[ 0.378748] Bluetooth: HCI device and connection manager initialized
[ 0.378785] Bluetooth: HCI socket layer initialized
[ 0.378817] Bluetooth: L2CAP socket layer initialized
[ 0.378869] Bluetooth: SCO socket layer initialized
[ 0.379288] cfg80211: Calling CRDA to update world regulatory domain
[ 0.379343] cfg80211: World regulatory domain updated:
[ 0.379371] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.379408] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.379443] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.379478] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.379512] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 0.379548] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 0.379583] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 0.379618] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 0.379652] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 0.381001] Switching to clocksource arch_sys_counter
[ 0.455497] NET: Registered protocol family 2
[ 0.456411] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.456610] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.456791] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.456907] TCP: reno registered
[ 0.456947] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.457029] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.457434] NET: Registered protocol family 1
[ 0.458517] gcc-mdss-8909 qcom,gcc-mdss.31: Registered GCC MDSS clocks.
[ 0.459484] Trying to unpack rootfs image as initramfs...
[ 0.647579] Freeing initrd memory: 3572K (c2000000 - c237d000)
[ 0.650886] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.653771] bounce pool size: 64 pages
[ 0.660018] fuse init (API version 7.22)
[ 0.660420] msgmni has been set to 1428
[ 0.664200] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.664249] io scheduler noop registered
[ 0.664289] io scheduler row registered
[ 0.664446] io scheduler cfq registered (default)
[ 0.664581] gpiochip_find_base: found new base at 910
[ 0.664689] gpiochip_add: registered GPIOs 910 to 910 on device: pm8909-mpp
[ 0.664775] qcom,qpnp-pin qpnp-pin-f4bc9600: qpnp_pin_probe: gpio_chip registered between 910-910
[ 0.664882] gpiochip_find_base: found new base at 906
[ 0.664988] gpiochip_add: registered GPIOs 906 to 909 on device: pm8909-gpio
[ 0.665140] qcom,qpnp-pin qpnp-pin-f4bc9800: qpnp_pin_probe: gpio_chip registered between 906-909
[ 0.665274] gpiochip_find_base: found new base at 874
[ 0.665375] gpiochip_add: registered GPIOs 874 to 905 on device: smp2p
[ 0.666036] gpiochip_find_base: found new base at 842
[ 0.666143] gpiochip_add: registered GPIOs 842 to 873 on device: smp2p
[ 0.666194] gpiochip_find_base: found new base at 810
[ 0.666300] gpiochip_add: registered GPIOs 810 to 841 on device: smp2p
[ 0.666978] gpiochip_find_base: found new base at 778
[ 0.667085] gpiochip_add: registered GPIOs 778 to 809 on device: smp2p
[ 0.667136] gpiochip_find_base: found new base at 746
[ 0.667239] gpiochip_add: registered GPIOs 746 to 777 on device: smp2p
[ 0.667930] gpiochip_find_base: found new base at 714
[ 0.668031] gpiochip_add: registered GPIOs 714 to 745 on device: smp2p
[ 0.668082] gpiochip_find_base: found new base at 682
[ 0.668187] gpiochip_add: registered GPIOs 682 to 713 on device: slave-kernel
[ 0.668312] platform qcom,smp2pgpio-ssr-smp2p-4-in.14: Driver smp2pgpio requests probe deferral
[ 0.668398] gpiochip_find_base: found new base at 682
[ 0.668502] gpiochip_add: registered GPIOs 682 to 713 on device: master-kernel
[ 0.668605] platform qcom,smp2pgpio-ssr-smp2p-4-out.15: Driver smp2pgpio requests probe deferral
[ 0.668688] gpiochip_find_base: found new base at 682
[ 0.668787] gpiochip_add: registered GPIOs 682 to 713 on device: slave-kernel
[ 0.668886] platform qcom,smp2pgpio-ssr-smp2p-1-in.16: Driver smp2pgpio requests probe deferral
[ 0.668966] gpiochip_find_base: found new base at 682
[ 0.669066] gpiochip_add: registered GPIOs 682 to 713 on device: master-kernel
[ 0.669167] platform qcom,smp2pgpio-ssr-smp2p-1-out.17: Driver smp2pgpio requests probe deferral
[ 0.673001] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[ 0.673447] mdss_dsi_panel_init: Panel Name = nt35521 720p dj video mode dsi panel
[ 0.673494] set_mdss_dsi_panel_resolution: set display_coords_x_max 720,display_coords_y_max 1280.
[ 0.673940] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
[ 0.673999] mdss_dsi_parse_panel_features: ulps feature disabled
[ 0.674035] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[ 0.674071] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
[ 0.674116] of_get_named_gpio_flags: can't parse gpios property
[ 0.674125] mdss_dsi_parse_panel_features:1175, Disp_en gpio not specified
[ 0.674169] mdss_dsi_panel_init: Continuous splash enabled
[ 0.674553] of_get_named_gpio_flags: can't parse gpios property
[ 0.674564] dsi_panel_device_register:1814, Disp_en gpio not specified
[ 0.674600] of_get_named_gpio_flags: can't parse gpios property
[ 0.674609] dsi_panel_device_register:1822, TE gpio not specified
[ 0.674640] of_get_named_gpio_flags: can't parse gpios property
[ 0.674648] dsi_panel_device_register: bklt_en gpio not specified
[ 0.674814] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
[ 0.674844] PLL 1 Clock's did not register
[ 0.674893] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c7a72000 ctrl_size=25c phy_base=c7a78500 phy_size=2b0
[ 0.674941] dsi_panel_device_register: Using default BTA for ESD check
[ 0.693919] mdss_register_panel: adding framebuffer device 1ac8000.qcom,mdss_dsi
[ 0.701769] mdss_dsi_status_init: DSI status check interval:5000
[ 0.703074] mdp3_alloc: allocating 12582912 bytes at c3000000 (83000000 phys) for fb 0
[ 0.703510] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
[ 0.703548] mdp3_ctrl_init: mdp3_ctrl_init
[ 0.706661] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[ 0.708750] msm_rpm_log_probe: OK
[ 0.709182] msm_smp2p_init: unable to create log context
[ 0.711148] IPC_RTR: msm_ipc_router_init: Unable to create IPC logging for IPC RTR
[ 0.711297] NET: Registered protocol family 27
[ 0.711328] IPC_RTR: msm_ipc_router_ipc_log_init: Unable to create IPC logging for Req/Resp
[ 0.711360] IPC_RTR: msm_ipc_router_ipc_log_init: Unable to create IPC logging for Indications
[ 0.714363] In memshare_probe, Memshare probe success
[ 0.717939] of_get_named_gpio_flags exited with status -517
[ 0.717963] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
[ 0.718051] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
[ 0.720070] of_get_named_gpio_flags exited with status -517
[ 0.720091] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
[ 0.720446] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
[ 0.722275] smd_tty_log_init: Unable to create IPC log
[ 0.737976] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
[ 0.748433] brd: module loaded
[ 0.752883] loop: module loaded
[ 0.753554] misc memnotify: update period set to 250 ms or 25 jiffies
[ 0.753575] misc memnotify: update period limit set to 15000 ms or 1500 jiffies
[ 0.753593] misc memnotify: update space set to 0 kb or -+3812 pages
[ 0.753611] misc memnotify: 488017 available pages found (488017 ram + 0 swap)
[ 0.753632] misc memnotify: 4857 used pages, utilization 0 percents
[ 0.753650] misc memnotify: 0 active pages, utilization 0 percents
[ 0.753668] misc memnotify: 488017 total pages, utilization 100 percents
[ 0.753686] misc memnotify: 0 swap_total pages, utilization 0 percents
[ 0.753703] misc memnotify: 0 swap_free pages, utilization 0 percents
[ 0.753720] misc memnotify: overhead per client connection is 40 bytes
[ 0.754644] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
[ 0.754738] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
[ 0.754778] QSEECOM: qseecom_probe: Device does not support PFE
[ 0.754829] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 0.754862] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
[ 0.755088] QSEECOM: qseecom_probe: secure app region addr=0x87a00000 size=0x200000
[ 0.759728] kmsgdumper_init start
[ 0.759998] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 0.760046] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 0.760296] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 0.760343] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 0.760488] [pn547]Loading pn544 driver
[ 0.761489] [pn547]enter pn544_probe function
[ 0.761534] [pn547] client->dev.of_node:::::: pn544_probe function
[ 0.761662] [pn547] qcom,clk-src = BBCLK2
[ 0.761717] [pn547] qcom,clk-gpio = 907
[ 0.761753] [pn547] start request platform_data->irq_gpio = 932
[ 0.761811] [pn547] start request platform_data->ven_gpio = 931
[ 0.761864] [pn547] start request platform_data->firm_gpio = 1006
[ 0.761937] [pn547] **qcom,clk-src = BBCLK2*********
[ 0.761976] [pn547] request clkreq_gpio = 907
[ 0.762283] [pn547]pn544_probe : requesting IRQ 932
[ 0.762326] [pn547]pn544_probe : client->name pn544
[ 0.765211] of_get_named_gpio_flags: can't parse gpios property
[ 0.765232] of_get_named_gpio_flags: can't parse gpios property
[ 0.765248] of_get_named_gpio_flags: can't parse gpios property
[ 0.765263] of_get_named_gpio_flags: can't parse gpios property
[ 0.765277] of_get_named_gpio_flags: can't parse gpios property
[ 0.765292] of_get_named_gpio_flags: can't parse gpios property
[ 0.765307] of_get_named_gpio_flags: can't parse gpios property
[ 0.766532] tun: Universal TUN/TAP device driver, 1.6
[ 0.766580] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.772719] PPP generic driver version 2.4.2
[ 0.773071] PPP BSD Compression module registered
[ 0.773114] PPP Deflate Compression module registered
[ 0.773168] PPP MPPE Compression module registered
[ 0.773208] NET: Registered protocol family 24
[ 0.774228] wcnss_wlan probed in built-in mode
[ 0.776864] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[ 0.777720] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[ 0.778113] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
[ 0.778497] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
[ 0.779410] msm_otg 78d9000.usb: msm_otg probe
[ 0.779939] of_get_named_gpio_flags: can't parse gpios property
[ 0.779969] of_get_named_gpio_flags: can't parse gpios property
[ 0.784485] msm_otg 78d9000.usb: OTG regs = c7afa000
[ 0.787281] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.787337] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 0.787748] ehci-msm2: Qualcomm EHCI Host Controller
[ 0.788666] usbcore: registered new interface driver cdc_acm
[ 0.788712] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.788873] usbcore: registered new interface driver ccid_bridge
[ 0.789241] ccid_bridge_init: success
[ 0.791742] msm_otg 78d9000.usb: phy_reset: success
[ 0.793577] mousedev: PS/2 mouse device common for all mice
[ 0.794539] get_mdss_dsi_panel_resolution: get display_coords_x_max 720,display_coords_y_max 1280.
[ 0.795541] of_get_named_gpio_flags: can't parse gpios property
[ 0.863996] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
[ 0.867165] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x68 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 0.868124] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x68 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 0.869055] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x68 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 0.869670] mpu3050 1-0068: failed to detect device
[ 0.871986] stk_ps 1-0048: stk3x1x_probe: stk3x1x_parse_dt ret=0
[ 0.872246] input: light as /devices/virtual/input/input0
[ 0.872682] input: proximity as /devices/virtual/input/input1
[ 0.961950] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0xd MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 0.874069] AKM compass driver: initialize.
[ 0.962595] akm09911 1-000d: akm_i2c_rxdata: transfer failed.
[ 0.963572] akm09911: probe of 1-000d failed with error -107
[ 1.021992] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.022629] QMC7983_probe: i2c read chip ID err !
[ 1.023609] qmc7983: probe of 1-002d failed with error 1
[ 1.025560] input: qpnp_vibra_ffmemless as /devices/soc.0/qpnp-vibrator-f4bca800/input/input2
[ 1.026834] qcom,qpnp-vibrator qpnp-vibrator-f4bca800: Probe success: vtg_level = 31, mode = 0, pwm_channel = 0, period_us = 0, duty_us = 0, active_low = 0
[ 1.055747] input: accelerometer as /devices/soc.0/78b5000.i2c/i2c-1/1-0018/input/input3
[ 1.056830] input: bma_interrupt as /devices/soc.0/78b5000.i2c/i2c-1/1-0018/input/input4
[ 1.058962] accelerometer 1-0018: BMA2x2 driver probe successfully
[ 1.059167] i2c-core: driver [accelerometer] using legacy suspend method
[ 1.059269] i2c-core: driver [accelerometer] using legacy resume method
[ 1.061863] qcom,qpnp-rtc qpnp-rtc-f4bc9e00: rtc core: registered qpnp_rtc as rtc0
[ 1.062182] i2c /dev entries driver
[ 1.067307] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
[ 1.071902] msm_actuator_i2c_probe:1189 msm_actuator_i2c_probe: succeeded
[ 1.072697] LED trigger flashlight-trigger failed to register (-17)
[ 1.074048] adp1660 i2c_add_driver success
[ 1.074700] msm_flash_init_module:1043 Enter
[ 1.075357] msm_flash_lm3642_init entry
[ 1.078411] g_sctrl[0] f45b3800
[ 1.079056] g_sctrl[1] f45b4000
[ 1.079148] gc0310_init_module:921
[ 1.079544] ------------[ cut here ]------------
[ 1.079590] WARNING: at /home/abuild/rpmbuild/BUILD/kernel/include/linux/of.h:555 msm_camera_get_dt_vreg_data+0x178/0x498()
[ 1.079644] Modules linked in:
[ 1.079677] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.49+0.0.52.3 #1
[ 1.079739] [<c010d758>] (unwind_backtrace+0x0/0x128) from [<c010abe8>] (show_stack+0x20/0x24)
[ 1.079798] [<c010abe8>] (show_stack+0x20/0x24) from [<c0a3cb08>] (dump_stack+0x20/0x28)
[ 1.079857] [<c0a3cb08>] (dump_stack+0x20/0x28) from [<c011cf44>] (warn_slowpath_common+0x5c/0x7c)
[ 1.079918] [<c011cf44>] (warn_slowpath_common+0x5c/0x7c) from [<c011d168>] (warn_slowpath_null+0x2c/0x34)
[ 1.079981] [<c011d168>] (warn_slowpath_null+0x2c/0x34) from [<c0655a68>] (msm_camera_get_dt_vreg_data+0x178/0x498)
[ 1.080047] [<c0655a68>] (msm_camera_get_dt_vreg_data+0x178/0x498) from [<c06657f4>] (msm_sensor_get_dt_data+0x30c/0x94c)
[ 1.080115] [<c06657f4>] (msm_sensor_get_dt_data+0x30c/0x94c) from [<c06673e8>] (msm_sensor_i2c_probe+0xe4/0x47c)
[ 1.080180] [<c06673e8>] (msm_sensor_i2c_probe+0xe4/0x47c) from [<c06679a0>] (msm_gc0310_i2c_probe+0x1c/0x24)
[ 1.080243] [<c06679a0>] (msm_gc0310_i2c_probe+0x1c/0x24) from [<c05db94c>] (i2c_device_probe+0xcc/0x114)
[ 1.080307] [<c05db94c>] (i2c_device_probe+0xcc/0x114) from [<c048bf20>] (driver_probe_device+0x140/0x350)
[ 1.080369] [<c048bf20>] (driver_probe_device+0x140/0x350) from [<c048c1fc>] (__driver_attach+0x78/0x9c)
[ 1.080430] [<c048c1fc>] (__driver_attach+0x78/0x9c) from [<c048a024>] (bus_for_each_dev+0x84/0x98)
[ 1.080489] [<c048a024>] (bus_for_each_dev+0x84/0x98) from [<c048b888>] (driver_attach+0x28/0x30)
[ 1.080547] [<c048b888>] (driver_attach+0x28/0x30) from [<c048b3bc>] (bus_add_driver+0x114/0x258)
[ 1.080607] [<c048b3bc>] (bus_add_driver+0x114/0x258) from [<c048c82c>] (driver_register+0xac/0x134)
[ 1.080666] [<c048c82c>] (driver_register+0xac/0x134) from [<c05da7cc>] (i2c_register_driver+0x50/0xec)
[ 1.080727] [<c05da7cc>] (i2c_register_driver+0x50/0xec) from [<c1037300>] (gc0310_init_module+0x28/0x60)
[ 1.080788] [<c1037300>] (gc0310_init_module+0x28/0x60) from [<c01006a0>] (do_one_initcall+0xe0/0x18c)
[ 1.080850] [<c01006a0>] (do_one_initcall+0xe0/0x18c) from [<c1000c48>] (kernel_init_freeable+0x110/0x1d8)
[ 1.080913] [<c1000c48>] (kernel_init_freeable+0x110/0x1d8) from [<c0a327f8>] (kernel_init+0x1c/0xf4)
[ 1.080974] [<c0a327f8>] (kernel_init+0x1c/0xf4) from [<c0106bc8>] (ret_from_fork+0x14/0x20)
[ 1.081022] ---[ end trace da227214a82491b8 ]---
[ 1.101289] ERR:msm_camera_power_up: 1319 usr_idx:2 dts_idx:2
[ 1.121759] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x8 (ok)
[ 1.123045] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x21 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.123370] msm_sensor_match_id: gc0310: read id failed
[ 1.123459] msm_sensor_check_id:1336 match id failed rc -107
[ 1.140752] msm_camera_power_down:1511:seq_val:2 > num_vreg: 2
[ 1.202115] ERR:msm_camera_power_up: 1319 usr_idx:2 dts_idx:2
[ 1.220208] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x21 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.220929] msm_sensor_match_id: gc0310: read id failed
[ 1.221588] msm_sensor_check_id:1336 match id failed rc -107
[ 1.238923] msm_camera_power_down:1511:seq_val:2 > num_vreg: 2
[ 1.301697] ERR:msm_camera_power_up: 1319 usr_idx:2 dts_idx:2
[ 1.319259] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x21 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.319560] msm_sensor_match_id: gc0310: read id failed
[ 1.319646] msm_sensor_check_id:1336 match id failed rc -107
[ 1.336951] msm_camera_power_down:1511:seq_val:2 > num_vreg: 2
[ 1.381551] msm_sensor_i2c_probe gc0310 power up failed
[ 1.381794] gc0310: probe of 3-0042 failed with error -107
[ 1.393535] BMS: bms_get_adc: vadc not found - defer probe rc=-517
[ 1.393573] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
[ 1.393615] spmi qpnp-vm-bms-f4bca600: Driver qcom,qpnp-vm-bms requests probe deferral
[ 1.393817] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
[ 1.393861] spmi qpnp-linear-charger-f4bca200: Driver qcom,qpnp-linear-charger requests probe deferral
[ 1.395431] qpnp_vadc_get_temp: VADC read error with -517
[ 1.395466] thermal thermal_zone0: failed to read out thermal zone 0
[ 1.395638] qpnp_vadc_get_temp: VADC read error with -517
[ 1.395668] thermal thermal_zone1: failed to read out thermal zone 1
[ 1.395832] qpnp_vadc_get_temp: VADC read error with -517
[ 1.395862] thermal thermal_zone2: failed to read out thermal zone 2
[ 1.414138] MSM Watchdog Initialized
[ 1.414951] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 1.415186] device-mapper: req-crypt: dm-req-crypt successfully initalized.
[ 1.415229] Bluetooth: HCI UART driver ver 2.2
[ 1.415254] Bluetooth: HCI H4 protocol initialized
[ 1.415464] cpuidle: using governor ladder
[ 1.415531] sdhci: Secure Digital Host Controller Interface driver
[ 1.415560] sdhci: Copyright(c) Pierre Ossman
[ 1.415582] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.416438] of_get_named_gpio_flags: can't parse gpios property
[ 1.422981] mmc0: no vqmmc regulator found
[ 1.423035] mmc0: no vmmc regulator found
[ 1.452898] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
[ 1.462120] of_get_named_gpio_flags: can't parse gpios property
[ 1.469948] mmc1: no vqmmc regulator found
[ 1.469988] mmc1: no vmmc regulator found
[ 1.500471] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
[ 1.503574] qcom,leds-qpnp: probe of leds-qpnp-f4bca000 failed with error -10
[ 1.509063] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x45 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.510306] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x45 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.510932] aw2013_led 1-0045: Check chip id error
[ 1.511635] aw2013_led: probe of 1-0045 failed with error -22
[ 1.512602] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
[ 1.512647] qce 720000.qcedev: CE device = 0x0
, IO base, CE = 0xc8440000
, Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
IO base BAM = 0x (null)
BAM IRQ 239
Engines Availability = 0x2010853
[ 1.512758] sps:BAM 0x00704000 is registered.
[ 1.513445] sps:BAM 0x00704000 (va:0xc8480000) enabled: ver:0x25, number of pipes:8
[ 1.514216] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
[ 1.515014] qcedev: FIPS140-2 Known Answer Tests : Skipped
[ 1.516187] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
[ 1.516235] qcrypto 720000.qcrypto: CE device = 0x0
, IO base, CE = 0xc84c0000
, Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
IO base BAM = 0x (null)
BAM IRQ 239
Engines Availability = 0x2010853
[ 1.517656] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
[ 1.518523] qcrypto 720000.qcrypto: qcrypto-ecb-aes
[ 1.518702] qcrypto 720000.qcrypto: qcrypto-cbc-aes
[ 1.518875] qcrypto 720000.qcrypto: qcrypto-ctr-aes
[ 1.519045] qcrypto 720000.qcrypto: qcrypto-ecb-des
[ 1.519217] qcrypto 720000.qcrypto: qcrypto-cbc-des
[ 1.519385] qcrypto 720000.qcrypto: qcrypto-ecb-3des
[ 1.519552] qcrypto 720000.qcrypto: qcrypto-cbc-3des
[ 1.519722] qcrypto 720000.qcrypto: qcrypto-xts-aes
[ 1.519915] qcrypto 720000.qcrypto: qcrypto-sha1
[ 1.520131] qcrypto 720000.qcrypto: qcrypto-sha256
[ 1.520330] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[ 1.520524] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[ 1.520721] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[ 1.520901] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[ 1.521333] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[ 1.521552] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[ 1.521773] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
[ 1.521969] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
[ 1.522184] qcrypto 720000.qcrypto: qcrypto-aes-ccm
[ 1.522380] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
[ 1.522411] qcrypto: FIPS140-2 Known Answer Tests: Skipped
[ 1.522797] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.523375] usbcore: registered new interface driver usbhid
[ 1.523408] usbhid: USB HID core driver
[ 1.525285] zram: Created 4 device(s) ...
[ 1.525986] ashmem: initialized
[ 1.526232] logger: created 256K log 'log_main'
[ 1.526474] logger: created 256K log 'log_events'
[ 1.526709] logger: created 256K log 'log_radio'
[ 1.526942] logger: created 256K log 'log_system'
[ 1.528023] sps:BAM 0x078c4000 is registered.
[ 1.528534] qcom,qpnp-power-on qpnp-power-on-f4bc9400: PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'cold' boot
[ 1.528607] qcom,qpnp-power-on qpnp-power-on-f4bc9400: PMIC@SID0: Unknown power-off reason
[ 1.528878] input: qpnp_pon as /devices/virtual/input/input5
[ 1.530856] PMIC@SID0: PM8909 v1.1 options: 2, 2, 0, 0
[ 1.550119] populate_opp_table: clock-a7: OPP tables populated (cpu 3)
[ 1.550165] print_opp_table: clock_cpu: a7: OPP voltage for 400000000: 4
[ 1.550195] print_opp_table: clock_cpu: a7: OPP voltage for 1267200000: 7
[ 1.551560] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
[ 1.551790] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[ 1.554542] devfreq qcom,cpubw.32: Couldn't update frequency transition information.
[ 1.558099] probe: Failed to create IPC log context
[ 1.558895] usbcore: registered new interface driver snd-usb-audio
[ 1.559812] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 1.559888] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 1.578187] msm-pcm-lpa qcom,msm-pcm-lpa.46: msm_pcm_probe: dev name qcom,msm-pcm-lpa.46
[ 1.579368] platform qcom,msm-voip-dsp.48: Driver msm-voip-dsp requests probe deferral
[ 1.579972] platform qcom,msm-pcm-voice.49: Driver msm-pcm-voice requests probe deferral
[ 1.586054] msm8x16-asoc-wcd sound.73: default codec configured
[ 1.586235] of_get_named_gpio_flags: can't parse gpios property
[ 1.587502] msm8x16-asoc-wcd sound.73: ASoC: platform (null) not registered
[ 1.587577] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 1.587658] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 1.588027] u32 classifier
[ 1.588050] Actions configured
[ 1.588078] Netfilter messages via NETLINK v0.30.
[ 1.588110] nfnl_acct: registering with nfnetlink.
[ 1.588247] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.588768] ctnetlink v0.93: registering with nfnetlink.
[ 1.588886] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.588916] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.589425] xt_time: kernel timezone is -0000
[ 1.589783] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.589999] arp_tables: (C) 2002 David S. Miller
[ 1.590078] TCP: cubic registered
[ 1.590099] Initializing XFRM netlink socket
[ 1.590512] NET: Registered protocol family 10
[ 1.592144] mip6: Mobile IPv6
[ 1.592235] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.592546] sit: IPv6 over IPv4 tunneling driver
[ 1.593404] NET: Registered protocol family 17
[ 1.593483] NET: Registered protocol family 15
[ 1.593670] Bridge firewalling registered
[ 1.593718] Ebtables v2.0 registered
[ 1.594035] Bluetooth: RFCOMM TTY layer initialized
[ 1.594117] Bluetooth: RFCOMM socket layer initialized
[ 1.594158] Bluetooth: RFCOMM ver 1.11
[ 1.594192] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.594232] Bluetooth: BNEP filters: protocol multicast
[ 1.594291] Bluetooth: BNEP socket layer initialized
[ 1.594332] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.594387] Bluetooth: HIDP socket layer initialized
[ 1.594490] l2tp_core: L2TP core driver, V2.0
[ 1.594545] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.594583] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 1.594650] l2tp_netlink: L2TP netlink interface
[ 1.594742] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 1.594786] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 1.595308] gpiochip_find_base: found new base at 682
[ 1.595482] gpiochip_add: registered GPIOs 682 to 713 on device: slave-kernel
[ 1.596214] gpiochip_find_base: found new base at 650
[ 1.596357] gpiochip_add: registered GPIOs 650 to 681 on device: master-kernel
[ 1.596541] gpiochip_find_base: found new base at 618
[ 1.596691] gpiochip_add: registered GPIOs 618 to 649 on device: slave-kernel
[ 1.597432] gpiochip_find_base: found new base at 586
[ 1.597582] gpiochip_add: registered GPIOs 586 to 617 on device: master-kernel
[ 1.608490] of_batterydata_read_data: qrd_skue_4v35_2500mah loaded
[ 1.620448] BMS: bms_load_hw_defaults: BMS_EN=1 Sample_Interval-S1=[100]S2=[70] Sample_Count-S1=[256]S2=[128] Fifo_Length-S1=[5]S2=[5] FSM_state=2
[ 1.633172] BMS: calculate_initial_soc: warm_reset=0 est_ocv=0 shutdown_soc_invalid=1 shutdown_ocv=65535 shutdown_soc=255 last_soc=-22 calculated_soc=83 last_ocv_uv=4123348
[ 1.633537] BMS: check_eoc_condition: Unable to read battery status
[ 1.646915] BMS: qpnp_vm_bms_probe: probe success: soc=83 vbatt=4053843 ocv=4123348 warm_reset=0
[ 1.767262] msm_bam_device_lpm_ok: Going to LPM now
[ 1.771054] msm_otg 78d9000.usb: USB in low power mode
[ 1.777272] CHG: qpnp_lbc_main_probe: Probe chg_dis=0 bpd=1 usb=0 batt_pres=1 batt_volt=4052369 soc=83
[ 1.777571] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 1.777800] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 1.780279] mmc0: BKOPS_EN bit = 0
[ 1.784429] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 1.784447] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 1.784504] msm8x16-asoc-wcd sound.73: default codec configured
[ 1.784832] of_get_named_gpio_flags: can't parse gpios property
[ 1.785793] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 1.785909] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 1.786074] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 1.786304] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 1.786461] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 1.788006] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 1.788116] Registering SWP/SWPB emulation handler
[ 1.790236] registered taskstats version 1
[ 1.793226] mmc0: new HS200 MMC card at address 0001
[ 1.793917] mmcblk0: mmc0:0001 R821MB 14.5 GiB
[ 1.794218] mmcblk0rpmb: mmc0:0001 R821MB partition 3 4.00 MiB
[ 1.797189] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28
[ 1.793700] bam_dmux_init : unable to create IPC Logging Context
[ 1.911433] tp_power: disabling
[ 1.911490] regulator-dummy: disabling
[ 1.912189] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 1.912201] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 1.912238] msm8x16-asoc-wcd sound.73: default codec configured
[ 1.912415] of_get_named_gpio_flags: can't parse gpios property
[ 1.912877] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 1.912951] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 1.913029] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 1.913166] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 1.913263] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 1.915057] file system registered
[ 1.915163] mbim_init: initialize 1 instances
[ 1.915380] mbim_init: Initialized 1 ports
[ 1.915406] mbim_bam_setup: no_ports:1
[ 1.915606] mbim_bam_setup: Initialized 1 ports
[ 1.917167] rndis_qc_init: initialize rndis QC instance
[ 1.917710] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 1.917745] android_usb gadget: Number of LUNs=1
[ 1.917771] lun0: LUN: removable file: (no medium)
[ 1.918205] android_usb gadget: android_usb ready
[ 1.918238] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
[ 1.918992] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 1.919004] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 1.919040] msm8x16-asoc-wcd sound.73: default codec configured
[ 1.919224] of_get_named_gpio_flags: can't parse gpios property
[ 1.919729] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 1.919805] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 1.919876] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 1.919972] gpiod_set_debounce: gpio-1001 status -22
[ 1.920018] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 1.920118] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 1.920152] gpiod_set_debounce: gpio-1002 status -22
[ 1.920430] input: gpio-keys as /devices/soc.0/gpio_keys.66/input/input6
[ 1.921511] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 1.921526] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 1.921566] msm8x16-asoc-wcd sound.73: default codec configured
[ 1.921924] of_get_named_gpio_flags: can't parse gpios property
[ 1.921939] Goodix-TS 5-005d: yyy 22222222222222
[ 1.921973] Goodix-TS 5-005d: GTP I2C Address: 0x5d
[ 1.922010] get_mdss_dsi_panel_resolution: get display_coords_x_max 720,display_coords_y_max 1280.
[ 1.922056] get_mdss_dsi_panel_resolution: get display_coords_x_max 720,display_coords_y_max 1280.
[ 1.922171] Goodix-TS 5-005d: 2 config data read from device tree.
[ 1.922460] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 1.922539] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 1.922617] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 1.922772] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 1.922883] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 2.063947] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x13 (ok)
[ 2.069911] Goodix-TS 5-005d: read X_max 720
[ 2.073076] Goodix-TS 5-005d: read Y_max 1280
[ 2.074741] Goodix-TS 5-005d: INT Type read value 1
[ 2.075998] input: Goodix-CTP as /devices/virtual/input/input7
[ 2.078443] ------------[ cut here ]------------
[ 2.078646] WARNING: at /home/abuild/rpmbuild/BUILD/kernel/kernel/irq/manage.c:525 irq_set_irq_wake+0x9c/0x100()
[ 2.078894] Unbalanced IRQ 325 wake disable
[ 2.079018] Modules linked in:
[ 2.079168] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.49+0.0.52.3 #1
[ 2.079445] [<c010d758>] (unwind_backtrace+0x0/0x128) from [<c010abe8>] (show_stack+0x20/0x24)
[ 2.079720] [<c010abe8>] (show_stack+0x20/0x24) from [<c0a3cb08>] (dump_stack+0x20/0x28)
[ 2.079996] [<c0a3cb08>] (dump_stack+0x20/0x28) from [<c011cf44>] (warn_slowpath_common+0x5c/0x7c)
[ 2.080291] [<c011cf44>] (warn_slowpath_common+0x5c/0x7c) from [<c011cfa4>] (warn_slowpath_fmt+0x40/0x48)
[ 2.080592] [<c011cfa4>] (warn_slowpath_fmt+0x40/0x48) from [<c016cb14>] (irq_set_irq_wake+0x9c/0x100)
[ 2.080890] [<c016cb14>] (irq_set_irq_wake+0x9c/0x100) from [<c05b900c>] (gtp_irq_disable+0x40/0x5c)
[ 2.081187] [<c05b900c>] (gtp_irq_disable+0x40/0x5c) from [<c05ba5e0>] (goodix_ts_probe+0xb28/0xf18)
[ 2.081476] [<c05ba5e0>] (goodix_ts_probe+0xb28/0xf18) from [<c05db94c>] (i2c_device_probe+0xcc/0x114)
[ 2.081770] [<c05db94c>] (i2c_device_probe+0xcc/0x114) from [<c048bf20>] (driver_probe_device+0x140/0x350)
[ 2.082071] [<c048bf20>] (driver_probe_device+0x140/0x350) from [<c048c1fc>] (__driver_attach+0x78/0x9c)
[ 2.082365] [<c048c1fc>] (__driver_attach+0x78/0x9c) from [<c048a024>] (bus_for_each_dev+0x84/0x98)
[ 2.082649] [<c048a024>] (bus_for_each_dev+0x84/0x98) from [<c048b888>] (driver_attach+0x28/0x30)
[ 2.082931] [<c048b888>] (driver_attach+0x28/0x30) from [<c048b3bc>] (bus_add_driver+0x114/0x258)
[ 2.083214] [<c048b3bc>] (bus_add_driver+0x114/0x258) from [<c048c82c>] (driver_register+0xac/0x134)
[ 2.083500] [<c048c82c>] (driver_register+0xac/0x134) from [<c05da7cc>] (i2c_register_driver+0x50/0xec)
[ 2.083789] [<c05da7cc>] (i2c_register_driver+0x50/0xec) from [<c10357c4>] (goodix_ts_init+0x18/0x20)
[ 2.084072] [<c10357c4>] (goodix_ts_init+0x18/0x20) from [<c01006a0>] (do_one_initcall+0xe0/0x18c)
[ 2.084357] [<c01006a0>] (do_one_initcall+0xe0/0x18c) from [<c1000c48>] (kernel_init_freeable+0x110/0x1d8)
[ 2.084658] [<c1000c48>] (kernel_init_freeable+0x110/0x1d8) from [<c0a327f8>] (kernel_init+0x1c/0xf4)
[ 2.084949] [<c0a327f8>] (kernel_init+0x1c/0xf4) from [<c0106bc8>] (ret_from_fork+0x14/0x20)
[ 2.085177] ---[ end trace da227214a82491ba ]---
[ 2.086420] Goodix-TS 5-005d: GTP works in interrupt mode.
[ 2.087155] Goodix-TS 5-005d: GTP firmware version read failed.
[ 2.088047] Goodix-TS 5-005d: Goodix Product ID = 9157
[ 2.088094] Goodix-TS 5-005d: GTP Product id doesn't match.
[ 2.088401] qcom,qpnp-rtc qpnp-rtc-f4bc9e00: setting system clock to 1970-01-01 00:00:06 UTC (6)
[ 2.089201] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 2.089218] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 2.089273] msm8x16-asoc-wcd sound.73: default codec configured
[ 2.089564] of_get_named_gpio_flags: can't parse gpios property
[ 2.090424] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 2.090536] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 2.090646] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 2.090871] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 2.090983] msm_thermal:interrupt_mode_init Interrupt mode init
[ 2.091026] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 2.092884] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
[ 2.095339] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 2.095356] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 2.095404] msm8x16-asoc-wcd sound.73: default codec configured
[ 2.095634] of_get_named_gpio_flags: can't parse gpios property
[ 2.096299] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 2.096395] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 2.096484] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 2.096762] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 2.096934] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 2.097173] led_gpio_flash_probe:probe successfully!
[ 2.097673] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 2.097684] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 2.097727] msm8x16-asoc-wcd sound.73: default codec configured
[ 2.097938] of_get_named_gpio_flags: can't parse gpios property
[ 2.098540] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 2.098627] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 2.098712] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 2.098892] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 2.099017] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 2.100603] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
[ 2.101954] clock_late_init: Removing enables held for handed-off clocks
[ 2.102281] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 2.102292] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 2.102327] msm8x16-asoc-wcd sound.73: default codec configured
[ 2.102572] of_get_named_gpio_flags: can't parse gpios property
[ 2.103239] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 2.103404] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 2.103477] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 2.103629] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 2.103829] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 2.105981] ALSA device list:
[ 2.106004] No soundcards found.
[ 2.107915] Freeing unused kernel memory: 196K (c1100000 - c1131000)
[ 2.135248] initrd: Starting ramdisk..
[ 2.143446] root-mount: /rootfs
[ 2.435674] mmc1: new high speed SDHC card at address 1234
[ 2.436357] mmcblk1: mmc1:1234 SA32G 29.8 GiB
[ 2.438528] mmcblk1: unknown partition table
[ 2.439538] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 2.439551] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 2.439590] msm8x16-asoc-wcd sound.73: default codec configured
[ 2.439833] of_get_named_gpio_flags: can't parse gpios property
[ 2.440293] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 2.440366] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 2.440437] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 2.440595] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 2.440694] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 2.463508] bio: create slab <bio-1> at 1
[ 2.493896] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.531482] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.545297] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.553978] initrd: Mounting root succeeded
[ 2.554123] initrd: Searching for init process...
[ 2.554398] initrd: Found /sbin/preinit
[ 2.569409] initrd: Switching to rootfs at /rootfs, with init /sbin/preinit
[ 2.809355] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 4.028384] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 4.030462] systemd[1]: Set hostname to <sailfish>.
[ 4.101918] systemd[1]: usb-moded.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
[ 4.159881] systemd[1]: sensorfwd.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
[ 4.230334] systemd[1]: Expecting device dev-disk-by\x2dpartlabel-cache.device...
[ 4.230833] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.232127] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.232240] systemd[1]: Starting Login Prompts.
[ 4.232578] systemd[1]: Reached target Login Prompts.
[ 4.232650] systemd[1]: Expecting device dev-zram0.device...
[ 4.232927] systemd[1]: Expecting device dev-zram3.device...
[ 4.233196] systemd[1]: Expecting device dev-zram2.device...
[ 4.233459] systemd[1]: Expecting device dev-zram1.device...
[ 4.233726] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.234155] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.234225] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.234606] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.234752] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.234853] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.235120] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.235278] systemd[1]: Starting Replay Read-Ahead Data...
[ 4.238194] systemd[1]: Starting Collect Read-Ahead Data...
[ 4.240445] systemd[1]: Starting Journal Socket.
[ 4.241642] systemd[1]: Listening on Journal Socket.
[ 4.241833] systemd[1]: Starting Journal Service...
[ 4.244719] systemd[1]: Started Journal Service.
[ 4.270715] systemd-journald[315]: Vacuuming done, freed 0 bytes
[ 4.589484] systemd-udevd[341]: starting version 208
[ 5.544376] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 5.582991] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1
[ 5.587626] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: (null)
[ 5.610737] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)
[ 5.805385] systemd-journald[315]: Received request to flush runtime journal from PID 1
[ 5.815528] init: /init.qcom.rc: 498: user option requires a user id
[ 5.819613] init: could not import file 'init.carrier.rc' from 'init.target.rc'
[ 5.826757] init: Failed to open /dev/hw_random: Too many symbolic links encountered
[ 5.861819] init: Failed to open /dev/hw_random: Too many symbolic links encountered
[ 5.872372] fs_mgr: Cannot open file fstab.qcom
[ 5.872448] init: fs_mgr_mount_all returned an error
[ 5.873070] init: fs_mgr_mount_all returned unexpected error 255
[ 5.960405] Adding 97620k swap on /dev/zram1. Priority:100 extents:1 across:97620k SS
[ 5.963183] init: Detected MSM SOC ID=245 SOC VER=65536 BOARD TYPE=QRD
[ 5.963691] init: failed to open '/sys/class/graphics/fb1/msm_fb_type'
[ 5.963772] init: failed to open '/sys/class/graphics/fb2/msm_fb_type'
[ 5.965254] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[ 5.965330] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[ 5.965404] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
[ 5.965461] init: cannot expand '${persist.sys.mba_boot_timeout}' while writing to '/sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms'
[ 5.965529] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
[ 5.965587] init: cannot expand '${persist.sys.modem_auth_timeout}' while writing to '/sys/module/pil_msa/parameters/modem_auth_timeout_ms'
[ 5.965655] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
[ 5.965710] init: cannot expand '${persist.sys.pil_proxy_timeout}' while writing to '/sys/module/peripheral_loader/parameters/proxy_timeout_ms'
[ 5.977845] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x8c900000
[ 5.979076] Adding 97620k swap on /dev/zram2. Priority:100 extents:1 across:97620k SS
[ 5.982143] Adding 97620k swap on /dev/zram3. Priority:100 extents:1 across:97620k SS
[ 5.987753] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xaf300000 to 0xaf400000
[ 6.008877] Adding 97620k swap on /dev/zram0. Priority:100 extents:1 across:97620k SS
[ 6.033356] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[ 6.300741] misc memnotify: 0xf37a5a80 - observer 1 created
[ 6.300986] misc memnotify: 0xf37a5ac0 - observer 2 created
[ 6.301224] misc memnotify: 0xf37a5a80 - threshold set to 0x0
[ 6.301279] misc memnotify: 0xf37a5ac0 - threshold set to 0x0
[ 6.471477] Goodix-TS 5-005d: GTP already resumed.
[ 6.823753] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[ 6.898497] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 6.898515] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 6.898559] msm8x16-asoc-wcd sound.73: default codec configured
[ 6.898759] of_get_named_gpio_flags: can't parse gpios property
[ 6.899256] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 6.899333] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 6.899410] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 6.899584] spmi msm8x16_wcd_codec-f4bcaa00: Driver wcd-spmi-core requests probe deferral
[ 6.899674] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[ 6.899690] spmi msm8x16_wcd_codec-f4bcac00: Driver wcd-spmi-core requests probe deferral
[ 6.899833] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[ 6.899867] memshare: Modem Restart has happened
[ 6.900960] M-Notify: General: 7
[ 6.902302] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 6.902322] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 6.902380] msm8x16-asoc-wcd sound.73: default codec configured
[ 6.902676] of_get_named_gpio_flags: can't parse gpios property
[ 6.903356] msm8x16-asoc-wcd sound.73: ASoC: CODEC (null) not registered
[ 6.903465] msm8x16-asoc-wcd sound.73: snd_soc_register_card failed (-517)
[ 6.903583] platform sound.73: Driver msm8x16-asoc-wcd requests probe deferral
[ 6.906203] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
[ 6.909194] _gpio_request: gpio-1009 (spk_ext_pa_gpio) status -16
[ 6.909212] kangyan msm8x16_asoc_machine_probe: gpio98 request fail
[ 6.909265] msm8x16-asoc-wcd sound.73: default codec configured
[ 6.909518] of_get_named_gpio_flags: can't parse gpios property
[ 6.911665] wcd-spmi-core msm8x16_wcd_codec-f4bcaa00: Error: regulator not found
[ 6.923214] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
[ 6.923282] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
[ 6.945459] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: mux SLIM_0_RX AANC MUX has no paths
[ 6.948512] wcd-spmi-core msm8x16_wcd_codec-f4bcaa00: ASoC: mux RX3 MIX1 INP3 has no paths
[ 6.948699] wcd-spmi-core msm8x16_wcd_codec-f4bcaa00: ASoC: mux RX2 MIX1 INP3 has no paths
[ 7.077748] init: cannot find '/system/bin/rfs_access', disabling 'rfs_access'
[ 7.112489] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[ 7.116458] init: cannot find '/system/bin/cnss_diag', disabling 'cnss_diag'
[ 7.118507] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[ 7.120487] init: cannot find '/system/bin/dts_configurator', disabling 'dts_configurator'
[ 7.146949] logd.auditd: start
[ 7.191787] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
[ 7.219707] init: cannot find '/system/vendor/bin/RIDLClient.exe', disabling 'RIDL'
[ 7.288928] msm_thermal:set_enabled enabled = 0
[ 7.431006] handle_qmi_request: Error getting req_desc for msg_id 36
[ 7.431203] mem_share_svc_recv_msg: Error receiving message
[ 7.441979] diag: In diag_dci_write_proc, invalid data 0xf466b000, peripheral: 0, len: 527
[ 7.449334] apr_tal:Modem Is Up
[ 7.400914] msm_pm_qos_add_request: add request
[ 7.449582] Generating power_down_setting
[ 7.449622] msm_camera_fill_vreg_params:65 i 1 j 0 cam_vio
[ 7.449656] msm_camera_fill_vreg_params:76 i 4 j 1 cam_vana
[ 7.449689] msm_camera_fill_vreg_params:76 i 6 j 1 cam_vana
[ 7.449718] msm_camera_fill_vreg_params:65 i 9 j 0 cam_vio
[ 7.450169] msm_camera_config_single_vreg : can't find sub reg name
[ 7.462056] msm_camera_config_single_vreg : can't find sub reg name
[ 7.540131] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
[ 7.604019] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
[ 7.689081] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[ 7.691765] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3c MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 7.691927] msm_sensor_match_id: gc2235_back: read id failed
[ 7.691969] msm_sensor_check_id:1336 match id failed rc -107
[ 7.704066] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[ 7.705144] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[ 7.706449] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> VoIP mapping ok
[ 7.707976] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[ 7.711892] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> PRI_MI2S_RX_HOSTLESS mapping ok
[ 7.713038] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[ 7.714049] msm8x16-asoc-wcd sound.73: msm-stub-rx <-> qcom,msm-dai-q6-afe-proxy-rx.14 mapping ok
[ 7.751694] msm8x16-asoc-wcd sound.73: msm-stub-tx <-> qcom,msm-dai-q6-afe-proxy-tx.14 mapping ok
[ 7.752012] init: cannot find '/system/bin/ipacm-diag', disabling 'ipacm-diag'
[ 7.754662] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[ 7.755846] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[ 7.760562] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> TERT_MI2S_TX_HOSTLESS mapping ok
[ 7.762380] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[ 7.763502] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> Voice2 mapping ok
[ 7.772580] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> MultiMedia9 mapping ok
[ 7.773792] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> VoLTE mapping ok
[ 7.782467] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> VoWLAN mapping ok
[ 7.783634] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok
[ 7.792374] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
[ 7.798346] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> LSM1 mapping ok
[ 7.799639] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> LSM2 mapping ok
[ 7.800788] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> LSM3 mapping ok
[ 7.811949] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> LSM4 mapping ok
[ 7.813210] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> LSM5 mapping ok
[ 7.814617] compress asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok
[ 7.830743] init: cannot find '/system/bin/ipacm', disabling 'ipacm'
[ 7.831699] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> QUAT_MI2S_RX_HOSTLESS mapping ok
[ 7.833005] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> QCHAT mapping ok
[ 7.835159] msm8x16-asoc-wcd sound.73: msm8x16_wcd_i2s_rx1 <-> qcom,msm-dai-q6-mi2s-prim.146 mapping ok
[ 7.836612] msm8x16-asoc-wcd sound.73: msm-stub-rx <-> qcom,msm-dai-q6-mi2s-sec.147 mapping ok
[ 7.837393] smd_pkt_open: DATA5_CNTL open failed -19
[ 7.837655] msm8x16-asoc-wcd sound.73: msm8x16_wcd_i2s_tx1 <-> qcom,msm-dai-q6-mi2s-tert.149 mapping ok
[ 7.840086] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> qcom,msm-dai-q6-mi2s-quat.148 mapping ok
[ 7.841463] msm8x16-asoc-wcd sound.73: snd-soc-dummy-dai <-> qcom,msm-dai-q6-mi2s-quat.148 mapping ok
[ 7.842622] msm8x16-asoc-wcd sound.73: msm-stub-rx <-> qcom,msm-pri-auxpcm.60 mapping ok
[ 7.843749] msm8x16-asoc-wcd sound.73: msm-stub-tx <-> qcom,msm-pri-auxpcm.60 mapping ok
[ 7.857667] msm8x16-asoc-wcd sound.73: msm-stub-rx <-> qcom,msm-dai-q6-bt-sco-rx.134 mapping ok
[ 7.858742] msm8x16-asoc-wcd sound.73: msm-stub-tx <-> qcom,msm-dai-q6-bt-sco-tx.135 mapping ok
[ 7.859892] msm8x16-asoc-wcd sound.73: msm-stub-rx <-> qcom,msm-dai-q6-int-fm-rx.136 mapping ok
[ 7.860957] msm8x16-asoc-wcd sound.73: msm-stub-tx <-> qcom,msm-dai-q6-int-fm-tx.137 mapping ok
[ 7.862223] msm8x16-asoc-wcd sound.73: msm-stub-rx <-> qcom,msm-dai-q6-be-afe-pcm-rx.1 mapping ok
[ 7.872382] msm8x16-asoc-wcd sound.73: msm-stub-tx <-> qcom,msm-dai-q6-be-afe-pcm-tx.1 mapping ok
[ 7.873773] msm8x16-asoc-wcd sound.73: msm-stub-tx <-> qcom,msm-dai-q6-incall-record-t mapping ok
[ 7.874937] msm8x16-asoc-wcd sound.73: msm-stub-tx <-> qcom,msm-dai-q6-incall-record-r mapping ok
[ 7.876209] msm8x16-asoc-wcd sound.73: msm-stub-rx <-> qcom,msm-dai-q6-incall-music-rx mapping ok
[ 7.882211] msm8x16-asoc-wcd sound.73: msm-stub-rx <-> qcom,msm-dai-q6-incall-music-2- mapping ok
[ 7.912819] msm_camera_config_single_vreg : can't find sub reg name
[ 7.923945] msm_camera_config_single_vreg : can't find sub reg name
[ 7.947819] init: cannot find '/system/bin/rfs_access', disabling 'rfs_access'
[ 7.961678] msm_camera_config_single_vreg : can't find sub reg name
[ 7.972784] msm_camera_config_single_vreg : can't find sub reg name
[ 7.981820] input: msm8909-skue-snd-card Button Jack as /devices/soc.0/sound.73/sound/card0/input8
[ 7.982289] input: msm8909-skue-snd-card Headset Jack as /devices/soc.0/sound.73/sound/card0/input9
[ 8.201377] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3c MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 8.203907] msm_sensor_match_id: gc2235_back: read id failed
[ 8.203955] msm_sensor_check_id:1336 match id failed rc -107
[ 8.338443] smd_pkt_open: DATA5_CNTL open failed -19
[ 8.423096] msm_camera_config_single_vreg : can't find sub reg name
[ 8.434445] msm_camera_config_single_vreg : can't find sub reg name
[ 8.471624] msm_camera_config_single_vreg : can't find sub reg name
[ 8.482732] msm_camera_config_single_vreg : can't find sub reg name
[ 8.589856] sensors stk3311-light: Invalid value of delay, delay=0
[ 8.604857] sensors bma2x2-accel: Invalid value of delay, delay=0
[ 8.636921] diag: In diag_process_smd_read_data, diag_device_write error: -19
[ 8.711363] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3c MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 8.711527] msm_sensor_match_id: gc2235_back: read id failed
[ 8.711562] msm_sensor_check_id:1336 match id failed rc -107
[ 8.839483] smd_pkt_open: DATA5_CNTL open failed -19
[ 8.933149] msm_camera_config_single_vreg : can't find sub reg name
[ 8.944328] msm_camera_config_single_vreg : can't find sub reg name
[ 8.981220] gc2235_back power up failed
[ 8.981262] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
[ 8.981936] Generating power_down_setting
[ 8.981984] msm_camera_fill_vreg_params:65 i 1 j 0 cam_vio
[ 8.982035] msm_camera_fill_vreg_params:76 i 4 j 1 cam_vana
[ 8.982068] msm_camera_fill_vreg_params:76 i 6 j 1 cam_vana
[ 8.982101] msm_camera_fill_vreg_params:65 i 9 j 0 cam_vio
[ 8.982562] msm_camera_config_single_vreg : can't find sub reg name
[ 8.993453] msm_camera_config_single_vreg : can't find sub reg name
[ 9.221337] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3c MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 9.221548] msm_sensor_match_id: gc2355_back: read id failed
[ 9.221583] msm_sensor_check_id:1336 match id failed rc -107
[ 9.340585] smd_pkt_open: DATA5_CNTL open failed -19
[ 9.443598] msm_camera_config_single_vreg : can't find sub reg name
[ 9.455251] msm_camera_config_single_vreg : can't find sub reg name
[ 9.491798] msm_camera_config_single_vreg : can't find sub reg name
[ 9.502907] msm_camera_config_single_vreg : can't find sub reg name
[ 9.731493] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3c MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 9.736433] msm_sensor_match_id: gc2355_back: read id failed
[ 9.736488] msm_sensor_check_id:1336 match id failed rc -107
[ 9.841952] smd_pkt_open: DATA5_CNTL open failed -19
[ 9.870996] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 9.872594] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x1
[ 9.872734] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
[ 9.872821] APR: Wrong parameters
[ 9.872851] adm_get_params: Failed to Get Params on port_id 0x0 -22
[ 9.872885] msm_dolby_dap_param_visualizer_control_get: get parameters failed
[ 9.873235] msm_pcm_volume_ctl_get substream runtime not found
[ 9.873385] msm_pcm_volume_ctl_get substream runtime not found
[ 9.873682] msm_pcm_volume_ctl_get substream runtime not found
[ 9.873838] msm_pcm_volume_ctl_get substream runtime not found
[ 9.874016] msm_pcm_volume_ctl_get substream runtime not found
[ 9.955102] msm_camera_config_single_vreg : can't find sub reg name
[ 9.966197] msm_camera_config_single_vreg : can't find sub reg name
[ 9.966780] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
[ 9.967005] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
[ 9.999237] wcd-spmi-core msm8x16_wcd_codec-f4bcaa00: Failed to get mbhc impedance -22
[ 10.002487] msm_camera_config_single_vreg : can't find sub reg name
[ 10.013577] msm_camera_config_single_vreg : can't find sub reg name
[ 10.063823] Goodix-TS 5-005d: GTP already resumed.
[ 10.071253] devbw qcom,gpubw.23: Governor already resumed!
[ 10.071301] devbw qcom,gpubw.23: Unable to resume BW HW mon governor (-16)
[ 10.118536] Goodix-TS 5-005d: GTP already resumed.
[ 10.241292] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3c MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 10.241436] msm_sensor_match_id: gc2355_back: read id failed
[ 10.241471] msm_sensor_check_id:1336 match id failed rc -107
[ 10.343000] smd_pkt_open: DATA5_CNTL open failed -19
[ 10.462838] msm_camera_config_single_vreg : can't find sub reg name
[ 10.474012] msm_camera_config_single_vreg : can't find sub reg name
[ 10.511206] gc2355_back power up failed
[ 10.511250] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
[ 10.511992] Generating power_down_setting
[ 10.512035] msm_camera_fill_vreg_params:65 i 2 j 0 cam_vio
[ 10.512072] msm_camera_fill_vreg_params:76 i 3 j 1 cam_vana
[ 10.512111] msm_camera_fill_vreg_params:87 i 4 j 2 cam_vaf
[ 10.512147] msm_camera_fill_vreg_params:87 i 6 j 2 cam_vaf
[ 10.512185] msm_camera_fill_vreg_params:76 i 7 j 1 cam_vana
[ 10.512222] msm_camera_fill_vreg_params:65 i 8 j 0 cam_vio
[ 10.554290] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3c MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 10.524784] msm_camera_config_single_vreg : can't find sub reg name
[ 10.554419] msm_sensor_match_id: sp5409: read id failed
[ 10.554452] msm_sensor_check_id:1336 match id failed rc -107
[ 10.582822] msm_camera_config_single_vreg : can't find sub reg name
[ 10.633674] msm_camera_config_single_vreg : can't find sub reg name
[ 10.662440] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3c MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 10.662571] msm_sensor_match_id: sp5409: read id failed
[ 10.662601] msm_sensor_check_id:1336 match id failed rc -107
[ 10.691760] msm_camera_config_single_vreg : can't find sub reg name
[ 10.743733] msm_camera_config_single_vreg : can't find sub reg name
[ 10.772795] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3c MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 10.772919] msm_sensor_match_id: sp5409: read id failed
[ 10.772949] msm_sensor_check_id:1336 match id failed rc -107
[ 10.801784] msm_camera_config_single_vreg : can't find sub reg name
[ 10.841169] sp5409 power up failed
[ 10.841212] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
[ 10.841844] Generating power_down_setting
[ 10.841877] msm_camera_fill_vreg_params:65 i 2 j 0 cam_vio
[ 10.841911] msm_camera_fill_vreg_params:76 i 3 j 1 cam_vana
[ 10.841939] msm_camera_fill_vreg_params:87 i 5 j 2 cam_vaf
[ 10.841966] msm_camera_fill_vreg_params:87 i 6 j 2 cam_vaf
[ 10.841993] msm_camera_fill_vreg_params:76 i 8 j 1 cam_vana
[ 10.842020] msm_camera_fill_vreg_params:65 i 9 j 0 cam_vio
[ 10.844076] smd_pkt_open: DATA5_CNTL open failed -19
[ 10.846666] msm_camera_config_single_vreg : can't find sub reg name
[ 10.851245] msm_camera_config_single_vreg : can't find sub reg name
[ 10.895266] msm_sensor_match_id chip id doesnot match
[ 10.895311] msm_sensor_check_id:1336 match id failed rc -19
[ 10.937347] msm_camera_config_single_vreg : can't find sub reg name
[ 10.941208] msm_camera_config_single_vreg : can't find sub reg name
[ 10.975767] msm_camera_config_single_vreg : can't find sub reg name
[ 10.980245] msm_camera_config_single_vreg : can't find sub reg name
[ 11.025780] msm_sensor_match_id chip id doesnot match
[ 11.025834] msm_sensor_check_id:1336 match id failed rc -19
[ 11.068644] msm_camera_config_single_vreg : can't find sub reg name
[ 11.073365] msm_camera_config_single_vreg : can't find sub reg name
[ 11.105736] msm_camera_config_single_vreg : can't find sub reg name
[ 11.110338] msm_camera_config_single_vreg : can't find sub reg name
[ 11.155596] msm_sensor_match_id chip id doesnot match
[ 11.155641] msm_sensor_check_id:1336 match id failed rc -19
[ 11.197664] msm_camera_config_single_vreg : can't find sub reg name
[ 11.201405] msm_camera_config_single_vreg : can't find sub reg name
[ 11.231236] ov5670_8909 power up failed
[ 11.231275] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -19
[ 11.232118] Generating power_down_setting
[ 11.232154] msm_camera_fill_vreg_params:65 i 2 j 0 cam_vio
[ 11.232190] msm_camera_fill_vreg_params:76 i 3 j 1 cam_vana
[ 11.232217] msm_camera_fill_vreg_params:87 i 5 j 2 cam_vaf
[ 11.232243] msm_camera_fill_vreg_params:87 i 6 j 2 cam_vaf
[ 11.232269] msm_camera_fill_vreg_params:76 i 8 j 1 cam_vana
[ 11.232295] msm_camera_fill_vreg_params:65 i 9 j 0 cam_vio
[ 11.236796] msm_camera_config_single_vreg : can't find sub reg name
[ 11.241356] msm_camera_config_single_vreg : can't find sub reg name
[ 11.286053] ov8858_8909 probe succeeded
[ 11.330432] msm_camera_config_single_vreg : can't find sub reg name
[ 11.334972] msm_camera_config_single_vreg : can't find sub reg name
[ 11.341926] slot 0 has some other sensor
[ 11.342716] slot 0 has some other sensor
[ 11.343415] slot 0 has some other sensor
[ 11.345154] smd_pkt_open: DATA5_CNTL open failed -19
[ 11.345708] slot 0 has some other sensor
[ 11.346480] Generating power_down_setting
[ 11.346518] msm_camera_fill_vreg_params:65 i 1 j 0 cam_vio
[ 11.346553] msm_camera_fill_vreg_params:76 i 2 j 1 cam_vana
[ 11.346581] msm_camera_fill_vreg_params:76 i 8 j 1 cam_vana
[ 11.346607] msm_camera_fill_vreg_params:65 i 9 j 0 cam_vio
[ 11.347039] msm_camera_config_single_vreg : can't find sub reg name
[ 11.347069] msm_camera_config_single_vreg : can't find sub reg name
[ 11.347131] event_handler: reclaimed all bufs
[ 11.349379] adm_get_topology_for_port_from_copp_id: Invalid copp_id 0 port_id 0x1005
[ 11.382575] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3d MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 11.382738] msm_sensor_match_id: sp2509: read id failed
[ 11.382768] msm_sensor_check_id:1336 match id failed rc -107
[ 11.416900] msm_camera_config_single_vreg : can't find sub reg name
[ 11.416935] msm_camera_config_single_vreg : can't find sub reg name
[ 11.441593] msm_camera_config_single_vreg : can't find sub reg name
[ 11.441627] msm_camera_config_single_vreg : can't find sub reg name
[ 11.474624] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3d MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 11.474782] msm_sensor_match_id: sp2509: read id failed
[ 11.474813] msm_sensor_check_id:1336 match id failed rc -107
[ 11.507543] msm_camera_config_single_vreg : can't find sub reg name
[ 11.507580] msm_camera_config_single_vreg : can't find sub reg name
[ 11.531600] msm_camera_config_single_vreg : can't find sub reg name
[ 11.531634] msm_camera_config_single_vreg : can't find sub reg name
[ 11.564616] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x3d MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 11.564745] msm_sensor_match_id: sp2509: read id failed
[ 11.564775] msm_sensor_check_id:1336 match id failed rc -107
[ 11.598263] msm_camera_config_single_vreg : can't find sub reg name
[ 11.598300] msm_camera_config_single_vreg : can't find sub reg name
[ 11.621254] sp2509 power up failed
[ 11.621289] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
[ 11.621907] Generating power_down_setting
[ 11.621941] msm_camera_fill_vreg_params:65 i 1 j 0 cam_vio
[ 11.621976] msm_camera_fill_vreg_params:76 i 4 j 1 cam_vana
[ 11.622003] msm_camera_fill_vreg_params:76 i 6 j 1 cam_vana
[ 11.622029] msm_camera_fill_vreg_params:65 i 9 j 0 cam_vio
[ 11.622430] msm_camera_config_single_vreg : can't find sub reg name
[ 11.633523] msm_camera_config_single_vreg : can't find sub reg name
[ 11.846230] smd_pkt_open: DATA5_CNTL open failed -19
[ 11.861552] msm_sensor_match_id chip id doesnot match
[ 11.861595] msm_sensor_check_id:1336 match id failed rc -19
[ 12.082748] msm_camera_config_single_vreg : can't find sub reg name
[ 12.093834] msm_camera_config_single_vreg : can't find sub reg name
[ 12.131574] msm_camera_config_single_vreg : can't find sub reg name
[ 12.142666] msm_camera_config_single_vreg : can't find sub reg name
[ 12.347237] smd_pkt_open: DATA5_CNTL open failed -19
[ 12.371538] msm_sensor_match_id chip id doesnot match
[ 12.371580] msm_sensor_check_id:1336 match id failed rc -19
[ 12.592830] msm_camera_config_single_vreg : can't find sub reg name
[ 12.603942] msm_camera_config_single_vreg : can't find sub reg name
[ 12.641624] msm_camera_config_single_vreg : can't find sub reg name
[ 12.652728] msm_camera_config_single_vreg : can't find sub reg name
[ 12.704513] wcd_imped_config, invalid imped, greater than 48 Ohm
= 48
[ 12.848215] smd_pkt_open: DATA5_CNTL open failed -19
[ 12.881440] msm_sensor_match_id chip id doesnot match
[ 12.881488] msm_sensor_check_id:1336 match id failed rc -19
[ 13.102644] msm_camera_config_single_vreg : can't find sub reg name
[ 13.113724] msm_camera_config_single_vreg : can't find sub reg name
[ 13.151147] gc2235_front power up failed
[ 13.151179] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -19
[ 13.151729] Generating power_down_setting
[ 13.151762] msm_camera_fill_vreg_params:65 i 2 j 0 cam_vio
[ 13.151795] msm_camera_fill_vreg_params:76 i 3 j 1 cam_vana
[ 13.151822] msm_camera_fill_vreg_params:76 i 6 j 1 cam_vana
[ 13.151848] msm_camera_fill_vreg_params:65 i 7 j 0 cam_vio
[ 13.156303] msm_camera_config_single_vreg : can't find sub reg name
[ 13.169161] msm_sensor_match_id chip id doesnot match
[ 13.169204] msm_sensor_check_id:1336 match id failed rc -19
[ 13.181692] msm_camera_config_single_vreg : can't find sub reg name
[ 13.215578] msm_camera_config_single_vreg : can't find sub reg name
[ 13.227664] msm_sensor_match_id chip id doesnot match
[ 13.227706] msm_sensor_check_id:1336 match id failed rc -19
[ 13.239680] msm_camera_config_single_vreg : can't find sub reg name
[ 13.275773] msm_camera_config_single_vreg : can't find sub reg name
[ 13.288758] msm_sensor_match_id chip id doesnot match
[ 13.288803] msm_sensor_check_id:1336 match id failed rc -19
[ 13.301394] msm_camera_config_single_vreg : can't find sub reg name
[ 13.328308] sps:BAM 0x04044000 is registered.
[ 13.328506] sps:BAM 0x04044000 (va:0xc87e0000) enabled: ver:0x25, number of pipes:6
[ 13.331380] gc2355_front_1lane power up failed
[ 13.331420] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -19
[ 13.332059] Generating power_down_setting
[ 13.332098] msm_camera_fill_vreg_params:65 i 2 j 0 cam_vio
[ 13.332180] msm_camera_fill_vreg_params:76 i 3 j 1 cam_vana
[ 13.332217] msm_camera_fill_vreg_params:76 i 6 j 1 cam_vana
[ 13.332248] msm_camera_fill_vreg_params:65 i 7 j 0 cam_vio
[ 13.332832] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 13.335888] msm_camera_config_single_vreg : can't find sub reg name
[ 13.349876] gc2755_front_1lane probe succeeded
[ 13.367183] msm_camera_config_single_vreg : can't find sub reg name
[ 13.372291] msm_csid_init: CSID_VERSION = 0x30010000
[ 13.372802] msm_csid_init: Failed in getting TOP gdscr regulator handle
[ 13.374419] msm_csid_init: CSID_VERSION = 0x30010000
[ 13.374944] msm_csid_init: Failed in getting TOP gdscr regulator handle
[ 13.392800] msm_isp_close_node: halt timeout rc=0
[ 14.345036] wcnss_wlan triggered by userspace
[ 14.345727] wcnss_pm_qos_add_request: add request
[ 14.345752] wcnss_pm_qos_update_request: update request 100
[ 14.345990] wcnss_trigger_config: vadc get failed
[ 14.346418] wcnss_notif_cb: wcnss notification event: 2
[ 14.355159] subsys-pil-tz a21b000.qcom,pronto: wcnss: loading from 0x8d500000 to 0x8d9fb000
[ 14.355683] wcnss_notif_cb: wcnss notification event: 6
[ 14.358922] wcnss: IRIS Reg: 91100004
[ 14.559084] subsys-pil-tz a21b000.qcom,pronto: wcnss: Brought out of reset
[ 14.876990] subsys-pil-tz a21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received
[ 14.877628] wcnss_notif_cb: wcnss notification event: 7
[ 14.896350] subsys-pil-tz a21b000.qcom,pronto: Subsystem error monitoring/handling services are up
[ 14.896753] wcnss_notif_cb: wcnss notification event: 3
[ 14.896785] wcnss_pm_qos_update_request: update request -1
[ 14.896815] wcnss_pm_qos_remove_request: remove request
[ 15.200415] init: property 'ril.ecclist' doesn't exist while expanding '${ril.ecclist}'
[ 15.200484] init: cannot expand '${ril.ecclist}' while writing to '/run/ofono/ril.ecclist'
[ 15.640218] init: property 'ril.ecclist1' doesn't exist while expanding '${ril.ecclist1}'
[ 15.640283] init: cannot expand '${ril.ecclist1}' while writing to '/run/ofono/ril.ecclist1'
[ 16.049681] wcnss_wlan_ctrl_probe: SMD ctrl channel up
[ 16.061182] wcnss: version 01050102
[ 16.061205] wcnss: schedule dnld work for pronto
[ 16.061568] wcnss: build version 00028
[ 16.061249] wcnss: NV download
[ 16.066066] wcnss: NV bin size: 31719, total_fragments: 11
[ 16.066110] wcnss: no space available for smd frame
[ 16.091202] wcnss: no space available for smd frame
[ 16.121228] wcnss: no space available for smd frame
[ 16.151629] wcnss: no space available for smd frame
[ 16.690205] wlan: loading driver v3.0.10.085
[ 17.633812] wcnss: received WCNSS_CBC_COMPLETE_IND from FW
[ 17.727296] wlan: [E :VOS] INFO: NV version = 3 is loaded, driver supports NV version = 3
[ 17.809885] wlan: WCNSS WLAN version 1.5.1.2
[ 17.809903] wlan: WCNSS software version 00028
[ 17.809914] wlan: WCNSS hardware version WCN v2.0 RadioPhy vUnknown with 19.2MHz XO
[ 17.809970] DefaultCountry is 00
[ 17.826880] wlan: driver loaded
[ 17.919237] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.981016] [08:29:45.116087] [0000000018F9ACDD] [wpa_s] wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[ 18.261930] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_ACL
[ 18.261946] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_CMD
[ 18.262041] Bluetooth: HCI device registration is starting
[ 18.402353] Bluetooth: Error in passing the packet to HCI Layer
[ 19.111282] [08:29:46.246352] [000000001A44CEBE] [wpa_s] wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[ 19.178224] [08:29:46.313288] [000000001A586AF0] [VosMC] wlan: [E :VOS] vos_mem_malloc: called with invalid arg 0 !!!
[ 19.178295] [08:29:46.313368] [000000001A587102] [VosMC] wlan: [E :PE ] limStripOffExtCapIE: 89: Unable to allocate memory to store addn IE
[ 19.181726] [08:29:46.316795] [000000001A597202] [VosMC] wlan: [E :PE ] limProcessAssocRspFrame: 472: Filling tdls prohibited in session entry
[ 19.206525] wlan: 94:fd:2e:02:ff:ad connected to 4c:e6:76:c4:e9:fc
[ 18.261844] hcismd_set_enable 0
[ 19.206960] wlan(2) 4c:e6:76:c4:e9:fc Standalone
[ 19.207576] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 19.218861] [08:29:46.353932] [000000001A645344] [wpa_s] wlan: [E :SME] sme_FTUpdateKey: Unhandled state=0
[ 19.219610] [08:29:46.354683] [000000001A648B8D] [wpa_s] wlan: [E :SME] sme_FTUpdateKey: Unhandled state=0
[ 20.721074] configuring dma source while dma is active
[ 21.521261] cfg80211: Calling CRDA for country: AU
[ 21.521488] cfg80211: Regulatory domain changed to country: AU
[ 21.521501] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.521511] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 21.521521] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (600 mBi, 2400 mBm)
[ 21.521531] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (600 mBi, 2400 mBm)
[ 21.521540] cfg80211: (5490000 KHz - 5590000 KHz @ 80000 KHz), (600 mBi, 2400 mBm)
[ 21.521550] cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (600 mBi, 2400 mBm)
[ 21.521559] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 3000 mBm)
[ 21.795465] [08:31:31.836087] [000000001D573038] [wpa_s] wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[ 26.544292] healthd: BatteryTechnologyPath not found
[ 27.434222] wcd-spmi-core msm8x16_wcd_codec-f4bcaa00: Failed to get mbhc impedance -22
[ 29.801787] wcd_imped_config, invalid imped, greater than 48 Ohm
= 48
[ 30.526692] Boot completed init: cannot find '/system/bin/qrngp', disabling 'qrngp'
[ 30.737612] msm_thermal:store_cc_enabled Core control disabled
[ 30.738305] msm_thermal:store_cc_enabled Core control enabled
</sailfish></bio-1></c0106bc8></c0a327f8></c0a327f8></c1000c48></c1000c48></c01006a0></c01006a0></c10357c4></c10357c4></c05da7cc></c05da7cc></c048c82c></c048c82c></c048b3bc></c048b3bc></c048b888></c048b888></c048a024></c048a024></c048c1fc></c048c1fc></c048bf20></c048bf20></c05db94c></c05db94c></c05ba5e0></c05ba5e0></c05b900c></c05b900c></c016cb14></c016cb14></c011cfa4></c011cfa4></c011cf44></c011cf44></c0a3cb08></c0a3cb08></c010abe8></c010abe8></c010d758></c0106bc8></c0a327f8></c0a327f8></c1000c48></c1000c48></c01006a0></c01006a0></c1037300></c1037300></c05da7cc></c05da7cc></c048c82c></c048c82c></c048b3bc></c048b3bc></c048b888></c048b888></c048a024></c048a024></c048c1fc></c048c1fc></c048bf20></c048bf20></c05db94c></c05db94c></c06679a0></c06679a0></c06673e8></c06673e8></c06657f4></c06657f4></c0655a68></c0655a68></c011d168></c011d168></c011cf44></c011cf44></c0a3cb08></c0a3cb08></c010abe8></c010abe8></c010d758></maxk@qualcomm.com></bio-0></c0100488></c1000ad0></c1000ad0></c100ed98></c100ed98></c019b05c></c019b05c></c019aa68></c019aa68></c011d168></c011d168></c011cf44></c011cf44></c0a3cb08></c0a3cb08></c010abe8></c010abe8></c010d758> 
