We have moved to a new Sailfish OS Forum. Please start new discussions there.
1

Recovery mode : Cannot connect to device

asked 2017-05-21 02:26:09 +0300

this post is marked as community wiki

This post is a wiki. Anyone with karma >75 is welcome to improve it.

updated 2019-10-27 21:58:51 +0300

SebM gravatar image

Hi,

I have to reset my Jolla1.

I have booted my Jolla into recovery mode, the Jolla logo and led are on but when I connect the usb cable to my Ubuntu and to my Jolla1, I cannot see any usb interface :

$ ifconfig | grep usb
$

Can you help ?

EDIT1 : My USB cable was faulty and the device name is not usb anymore :

$ ifconfig | grep -B1 10.42.66.6.
eth1      Link encap:Ethernet  HWaddr 00:01:02:03:04:05  
          inet addr:10.42.66.67  Bcast:10.42.66.71  Mask:255.255.255.248
$
edit retag flag offensive close delete

Comments

1 Answer

Sort by » oldest newest most voted
2

answered 2017-05-21 18:55:56 +0300

NGC-Ollie gravatar image

I just had my own problems, so I connected mine and saw this:

~$ ifconfig 
enx000102030405: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.42.66.67  netmask 255.255.255.248  broadcast 10.42.66.71
        inet6 fe80:::8bbe:860e:e597  prefixlen 64  scopeid 0x20<link>
        ether 00:01:02:03:04:05  txqueuelen 1000  (Ethernet)
        RX packets 1  bytes 290 (290.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 19  bytes 2676 (2.6 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.200  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 2002:2f2:64af:0:::7179  prefixlen 64  scopeid 0x0<global>
        inet6 fe80:::59ff:fe66:2179  prefixlen 64  scopeid 0x20<link>
        ether f0:79:59:66:71:79  txqueuelen 1000  (Ethernet)
        RX packets 202099  bytes 265997077 (265.9 MB)
        RX errors 0  dropped 41  overruns 0  frame 0
        TX packets 121702  bytes 10184810 (10.1 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Lokale Schleife)
        RX packets 546  bytes 38684 (38.6 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 546  bytes 38684 (38.6 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

As you may see, there's no usb inside the name. Please check without grep.

edit flag offensive delete publish link more
Login/Signup to Answer

Question tools

Follow
2 followers

Stats

Asked: 2017-05-21 02:26:09 +0300

Seen: 230 times

Last updated: Oct 27 '19