[Duplicate] Intex Aqua Fish - Volume is setting to 100 % by itself [duplicate]

@Noita_Poika

Uninstall Android support via Jolla Store and reboot device. Check to see if volume is still stuck. If the volume is still stuck, then you will need to enable Developer mode to make Terminal available for use, in Terminal, we can try a few things. But get rid of Android support for now and see if volume problem persists.

I am not directly attributing Android support to the volume problem, but it sounds to me like either Android support and/or pulseaudio has been corrupted/overwritten by the update, I also feel that Android support is a cause of many problems on Sailfish devices, so much so, I don't have it on my device.

Report back here with your findings :)

Thanks @fomtl,

Your solution worked, I think that it was definitely to do with Android Support(only my opinion), after following your suggestion a Factory Reset later, the device is working fine now. I will re-install ijoki build and watch how the device behaves.

That's good @Noita_Poika, glad you got sorted. I am guilty of blaming Android Support for many problems, but for good reason, removal of the support often yields calm seas again. I would normally suggest a factory reset, but some folk around here get a bit upset when resetting is the first given option ;)

If you consider your problem as answered, I can close the post for you, seeing as you don't have enough Karma yet to do it yourself, just let me know :)

Well, after Factory reset and installing the ijoki update, the problem is back.. :( and also all things connected with Android. Now I will have to void warranty and enable developer mode to make Terminal use. I will go with that route and may learn few Linux commands as well .. :D

Don't panic, you're not voiding your warranty by using developer mode, but if you bugger up your device using developer mode then yes, your warranty would become void!

I wonder if other any other Aquafish users are having or have had similar problems to yours.