Ask / Submit
0

Screen Black XA2 4113 Sailfish 3.0.0.8

asked 2018-11-09 15:26:11 +0200

this post is marked as community wiki

This post is a wiki. Anyone with karma >75 is welcome to improve it.

updated 2019-02-11 14:39:12 +0200

jiit gravatar image

by incoming on incoming and outgoing calls, screen remains black.

edit retag flag offensive close delete

Comments

I think this is in the errata for version 3.0.0.8 for the Xperia XA2

leszek ( 2018-11-09 17:20:17 +0200 )edit

I also have this on h4233 with official 3.0.1.14

Shoppinguin ( 2019-02-12 08:50:54 +0200 )edit

2 Answers

Sort by » oldest newest most voted
0

answered 2019-02-11 13:52:15 +0200

LinuxByChoice gravatar image

Installed yesterday an XA2 4113 with 3.0.1.11 that gets black screen after 1 second after all outgoing / incomming calls so it seems to be the proximity sensor that is a little buggy. Rebooting the device doesn't help. Sadly didn't check calling someone while i had Android still installed so hopefully the sensor i not broken.

i found this that i will try this week if it helps. https://together.jolla.com/question/196943/use-of-whisperfish-on-xa2-ultra-3008-black-screen-during-calls-in-and-outgoing/

edit flag offensive delete publish link more

Comments

1

this issue is till present on official beta 3.0.1.14. On incoming calls and clock alarm the display remains black. It is near impossible to cancel the alarm or pick up a call. it's a showstopper imho.

Shoppinguin ( 2019-02-12 08:50:08 +0200 )edit

tripple tap on the power button helps but doesn't remove the problem entirely. Need to wait for a bugfix it seems

LinuxByChoice ( 2019-02-15 12:54:07 +0200 )edit
0

answered 2019-04-10 09:06:04 +0200

Runningtrilo gravatar image

Using XA2-Ultra (3213) with SFOS 3 X beta Screen goes black while in- and outcommig calls. If i press power button, the first press makes the call silent, the second press makes a short flash of the regular screen and the third press brings the regular screen back, but the screnn shows only "call is silent". In these screen, i can finish the silent call and call back. In some cases, the second press takes the same result as the third pressing.

In the case, after a fresh reboot the screen works well.

What can i do ?

edit flag offensive delete publish link more

Comments

Login/Signup to Answer

Question tools

Follow
4 followers

Stats

Asked: 2018-11-09 15:26:11 +0200

Seen: 563 times

Last updated: Apr 10