Intex Aquafish not starting
asked 2019-07-10 14:29:46 +0300
Hello, I've had an Aquafish for 2 or 3 years, it's been working smoothly all the time. I only updated it with the official Intex releases, havent tried any risky magic yet. Today I was trying to start it and it just would not. It showed the initial screen, but it didn't fully turn on, went black again. Now when I try to start it, it only blinks the front light and vibrates every half a second. What happened to it? I guess it's showing an error code, but I can't seem to find any troubleshooting guides on the internet to know what it means. It definitely isn't out of battery, it's been charging for a day.
Have a look at this Jolla resource:link text
aspergerguy ( 2019-07-10 15:15:04 +0300 )editit didn't work. when i press the power key it again vibrates every half a second, nothing shows up on the screen. looks like a hardware problem.
macer ( 2019-07-10 18:50:19 +0300 )editso you checked battery voltage and its above 3.7 volts, right?
coderus ( 2019-07-10 23:55:00 +0300 )editit's 3,38V. does it mean it's dead?
macer ( 2019-07-11 00:02:14 +0300 )editLook for https://together.jolla.com/question/164870/jolla-c-recovery-mode-telnet-times-out/
I removed cable,battery. Held down VolUp button and ENTER while re-inserting battery till it vibrates and the message 'Recovery mode,connect USB cable and telnet to 10.42.66.66' appears.
If battery is too low, the charging process won't start.
chris_bavaria ( 2019-07-11 01:48:36 +0300 )edit