We have moved to a new Sailfish OS Forum. Please start new discussions there.
157

[Release notes] 1.1.2 / Yliaavanlampi [released]

asked 2015-02-19 12:20:22 +0200

Aard gravatar image

updated 2017-10-02 22:27:37 +0200

olf gravatar image

Update: 03. March, SDK is also available now

Update: We'll roll out 1.1.2.16 to all soon. SDK release will follow soon

This is the early access release of upgrade 11/1.1.2. The current version is 1.1.2.16, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

  • If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
  • Do not reboot the device while the update is in progress.
  • The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

Upgrade version history

Highlights

  • New weather application with events feed integration available through store
  • Browser received a new interface
  • Colours in ambiences can be adjusted
  • Email authentication capabilities can be autodetected
  • Improved low memory handling, now swap is properly taken into accoun

Security fixes

CVE-2013-6393 CVE-2013-6435 CVE-2013-7353 CVE-2013-7354 CVE-2014-2525 CVE-2014-3707 CVE-2014-7824 CVE-2014-8104 CVE-2014-8139 CVE-2014-8140 CVE-2014-8141 CVE-2014-8767 CVE-2014-8768 CVE-2014-8769 CVE-2014-8964 CVE-2014-9112 CVE-2014-9130 CVE-2014-9140 CVE-2014-9293 CVE-2014-9294 CVE-2014-9295

It also contains a fix for an issue in SailfishOS, details will be disclosed after rolling out this update to everyone.

Known issues

OS update process

  • Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
  • OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
    • Delete the file /home/nemo/.cache/store-client/os-info
    • Stop the store-client process (for e.g. pkill store-client)
    • Reopen Settings app, check for updates again and attempt to install the OS update again
  • We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
    • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues ##

  • Sometimes Messages and Phone app show black active covers.
  • calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
  • Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Bugfix and feature highlights

aliendalvik

  • Android runtime should not warn on low battery.
  • Can't erase/delete selected text with Backspace.
  • Cleaning of the clipboard crashes Alien Dalvik.
  • Aliendalvik does not detect mobile data being connected anymore (since 5th Dec 2014).
  • Switching between portrait and landscape messes up swipe gestures in Android apps.
  • Alien screen orientation is wrong sometimes.
  • VKB does not work with aliendalvik/android apps but works with native ones.
  • Set oom_score_adj according to process importance if Sailfish hasn't set it.

buteo-sync-plugin-caldav

  • Use ignore_ssl_errors configuration option

commhistory-daemon

  • Download MMS automatically by default
  • Delete attachments from the filesystem

connman

  • Cancel browser requests if useragent has not returned anything
  • Start/stop ntp activity when TimeUpdates property is changed

cpio

  • Fix CVE-2014-9112

curl

  • Fix CVE-2014-3707

dbus

  • fix CVE-2014-7824

jolla-calendar

  • Fix opening a day page from dbus invoker.

jolla-common-configurations

  • do not allow dhcp-server to change the hostname by default.
  • Enable D-Bus security checking
  • Added color editor and new settings layout.

jolla-keyboard

  • Fixed language selection popup layout.

jolla-settings-accounts

  • Add 'Ignore SSL errors' option.
  • Add missing version for oauth2 plugin for google.
  • Use QMF auth from capabilities.

jolla-settings-networking

  • dim WLAN hotspot when roaming not allowed.

jolla-settings-sailfishos

  • Require 500 Mb disk space for installing the update.

kernel-adaptation-sbj

  • Turn on heap randomization.

libcontacts-qt5

  • Prioritize requests that make app startup more responsive
  • look up address resolve requests in a QHash
  • Schedule resolveAddress immediately

libkeepalive

  • Ignore spurious iphb wakeups.

libpng

  • Upgrade to 1.5.21
  • Fixes out-of-bounds memory access in png_user_version_check()
  • Fixes overflow in png_combine_row with very wide interlaced images
  • Fixes CVE-2013-7354, CVE-2013-7353

libyaml

  • Fix bunch of security vulnerabilities
  • Fix CVE-2013-6393
  • Fix CVE-2014-2525: Heap overflow when parsing YAML tags
  • Fix CVE-2014-9130: assert failure when processing wrapped strings
  • Guard against overflows in indent and flow_level

lipstick-jolla-home-qt5

  • Timers for cellular icons.
  • Disable scrolling to launcher area and lock screen shortcut access during boot busy state.
  • Do not show busy-indicator if wlan is off.
  • Don't show launcher until boot sequence has finished and normal app launch speeds can be guaranteed.
  • Detect apps that failed to load.
  • Make sure to show searching & busy when no networks are found.
  • Don't pop up ConnectionSelector more often than once in 10 sec.

lipstick-qt5

  • Don't attempt to connect signal to a NULL HomeApplication
  • Fix crash on close regression

mce

  • Assume proximity covered while waiting for sensord to start up.
  • Allow user processes to query current memory level over D-Bus.
  • More robust low memory signaling
  • Add enablers for evdev event mapping
  • Enablers for TOHKBD and other hw keyboards
  • Allows actions such as automatic DTMF signaling to proceed when outbound call is answered

ntp

  • Fix CVE-2014-9295, CVE-2014-9294, CVE-2014-9293

openvpn

  • Fix CVE-2014-8104

pcre

  • Fix CVE-2014-8964.

qmf-qt5

  • Mask login information in the IMAP login logging.
  • Handle SMTP response 504.
  • Introduce discovery of authentication from the anounced capabilities(IMAP/SMTP)
  • Mask login information in the SMTP debug logging.
  • Update account lastSyncTime when IMAP IDLE disconnects.

qt5-qtlocation-source

  • Fix crash due to floating point precision issues, and update poly2tri to latest upstream.

rpm

  • Fix CVE-2013-6435

sailfish-components-contacts-qt ####5

  • Fixed SIM import
  • Fix calendar d-bus call on <10 day/month.
  • Don't make RecentContactsList wait for the contactsModel

sailfish-office

  • Add text eliding and text wrap to the details page.
  • fix issue #3: PDFs with mixed orientations not displayed correctly

sbj-configs

  • Adjust vm.swappiness to 50.

tcpdump

  • Fix CVE-2014-8767
  • Fix CVE-2014-8768
  • Fix CVE-2014-8769
  • Fix CVE-2014-9140

transferengine-plugins

  • Fix content height of Twitter image sharing.

unzip

  • Fix CVE-2014-8139, CVE-2014-8140 and CVE-2014-8141
edit retag flag offensive reopen delete

The question has been closed for the following reason "released in a software update" by r0kk3rz
close date 2015-08-26 15:59:47.111998

Comments

8

Sweet! Downloading right now!

nick75 ( 2015-02-19 12:35:26 +0200 )edit
23

is there a chance to get a "reset color" option to revert manual changes to the ambience main color?

dmnk ( 2015-02-19 12:35:46 +0200 )edit

Downloading now, next step BACKUP then upgrade else ......

WilliePre ( 2015-02-19 13:05:31 +0200 )edit
10

@dmnk revert option is implemented but didn't make it with this update

sledges ( 2015-02-19 13:14:40 +0200 )edit
1

downloaded, tried to install (3 times same result)
Sailfish Logo appears, after a few seconds:
update could not be installed, try again later.
(there is enough freespace - btrfs fi show: used 6.13GiB)

rudi ( 2015-02-19 13:26:57 +0200 )edit

41 Answers

Sort by » oldest newest most voted
15

answered 2015-02-19 17:07:14 +0200

coderus gravatar image

One more: Now Aliendalvik running inside chroot sandbox and android apps have no more access to Sailfish filesystem

edit flag offensive delete publish link more

Comments

1

I can't confirm this. Tried to attach a file in K-9 Mail and Telegram. With both apps I could navigate the whole file system.

Reodor ( 2015-02-19 17:17:20 +0200 )edit
2

Feature or an issue?

foss4ever ( 2015-02-19 18:16:22 +0200 )edit

Confirm, only chrooted file-system available for discovery.

hyper_sonic ( 2015-02-20 10:16:28 +0200 )edit

I agree with @Reodor. I tried couple of Android apps and they all seem to have access to the filesystem.

Valker ( 2015-02-20 15:31:02 +0200 )edit
7

I wish they give us options or even a config file to control how alien dalvik accesses the resources. sometimes I feel some apps deserve some resource access while some apps I just want them to run on sandbox completely cut off from the main device.. yes I even want to cut network access to few of them. I am not asking for fine grained app permissions but is there a way to control how much access we give to the android sandbox ?

pavi ( 2015-02-20 18:10:52 +0200 )edit
13

answered 2015-02-22 05:36:30 +0200

WhyNotHugo gravatar image

I wish the browser had Firefox Sync integration. It's all documented for you guys to sync to it, and the a lot of the code is shared (it is, right?).

Right now, I use the Firefox for Android app, because it lets me keep everything nicely in sync (history, bookmarks, and open tabs). I rely on this way too much, especially history/bookmarks.

Great job so far on the browser so far though, the UI certainly needed these upgrades!

edit flag offensive delete publish link more

Comments

Yes, very much needed to have the Mozilla/FF sync service enabled. Isn't there a specific request for this in TJC already? Let''s vote it and keep the topic hot.. ;)

Edit: here is the (more than a year old) request: https://together.jolla.com/question/903/add-support-for-mozilla-sync-service-to-the-sailfish-browser/

foss4ever ( 2015-02-26 10:35:31 +0200 )edit
12

answered 2015-02-19 14:29:07 +0200

lispy gravatar image

The "black Cover when in first position" bug from the messaging app seems to persist in this update.

edit flag offensive delete publish link more

Comments

5

For me that bug is gone.

William ( 2015-02-19 14:32:15 +0200 )edit

Bug is gone for me too

droll ( 2015-02-19 15:20:43 +0200 )edit
1

Among the first things I tested and I can say that it's gone for me as well. Will report if it occures again.

raketti ( 2015-02-19 15:31:35 +0200 )edit
2

Did my victory dance too soon, the bug persists.

See: Message app - black cover

But when I go to another app, so that the covers rearrange, the cover is updated and shows as it should: Message app - updated cover

raketti ( 2015-02-19 16:47:47 +0200 )edit
1

"But when I go to another app, so that the covers rearrange, the cover is updated and shows as it should" - This has always been the case. Hence the "black Cover when in first position" ;-)

lispy ( 2015-02-19 18:32:38 +0200 )edit
12

answered 2015-02-19 15:20:11 +0200

updated 2015-02-19 15:47:37 +0200

This is not an answer but posted here for visibility and legibility. Thanks for the update. Can we have links to relevant TJC links please? At least in cases where it is known. Would help in closure of topics.

"transferengine-plugins > Fix content height of Twitter image sharing." is it same as ??

Android runtime should not warn on low battery??

edit flag offensive delete publish link more
12

answered 2015-02-19 16:02:39 +0200

droll gravatar image

App page scrolling seems faster overall. App loading times also seemed to be shorter. However as mentioned by someone else, browser jerky scrolling is back.

i do like the browser interface now and the way it handles multiple tabs. the only thing missing is text reflow.

i also like the fact that about:config now works in the browser!

edit flag offensive delete publish link more

Comments

7

Don't know if it's make believe, but my unit also feels a bit faster overall. I really like the new browser interface, and also the fact that this upgrade didn't force me to repeat most of my tweaks. Great upgrade all in all.

eson ( 2015-02-19 16:42:48 +0200 )edit
1

Browser is an improvement (jerkiness aside), but it's still way behind the community developed WebPirate and WebCat ... both are faster, display the majority of websites in correct fashion, drain less battery and have much better UI and way more features.

boip ( 2015-02-19 17:13:57 +0200 )edit
2

about:config was already working in 1.1.1.26...

Sthocs ( 2015-02-19 17:31:43 +0200 )edit
1

Yes the browser is much better and faster, but the jerkiness is back when moving with finger i.e. putting finger down and sliding up or down. The content is jumping in tiny steps instead of floating smoothly. Normal scrolling by flicking / poking is smooth. https://together.jolla.com/question/34831/choppy-browser-scrolling-10420/

soloist ( 2015-02-20 15:10:22 +0200 )edit

@soloist Well, we have some Samsung phones at work, and they behave exactly the same... I admit that it's a tiny bit annoying for me, and I'd prefer it gone, but in the end it's really no issue for me :)

Direc ( 2015-02-20 19:52:26 +0200 )edit
8

answered 2015-02-20 17:54:34 +0200

Sulphur gravatar image

The German translated strings look like they were pulled straight from Google Translate. I found a few, but this probably affects all new strings from this release. https://together.jolla.com/question/82460/spelling-mistakes-in-german-translation

edit flag offensive delete publish link more

Comments

probably because they were.

boip ( 2015-02-21 14:58:30 +0200 )edit
7

answered 2015-02-19 15:15:28 +0200

t-lo gravatar image

I'm disappointed.

Request https://together.jolla.com/question/70499/request-enable-container-namespace-features-in-jolla-kernel/ which has been open for three months (and two updates) was not honoured in this update. Again.

edit flag offensive delete publish link more

Comments

14

@t-lo: As stated in there I forgot. So it went into testing two weeks ago which means it missed the window for this release..

Philippe De Swert ( 2015-02-19 15:20:01 +0200 )edit
3

Three months? What calendar are you using exactly?

Sthocs ( 2015-02-19 16:09:25 +0200 )edit
1

More like two months and one update, man...

Paspie ( 2015-02-19 18:13:00 +0200 )edit
6

answered 2015-02-19 17:25:18 +0200

Victorious gravatar image

updated 2015-02-19 17:53:41 +0200

I make a full system reset and after installation 1.1.2.15 - I can not add the mailbox "mail.ru" and "yandex.ru"("imap"), "hotmail.com" and "ovi.com" working properly. How can I fix this? P.S. "pop" (server type)- working

edit flag offensive delete publish link more

Comments

1

Similar issue to mine here?

kid ( 2015-02-19 17:46:37 +0200 )edit

Rebuilt backup does not help (not update mail)

Victorious ( 2015-02-19 17:59:31 +0200 )edit

I have the same issue with my university's IMAP account. POP works.

gehowa ( 2015-02-19 20:32:54 +0200 )edit
1

@Victorious - Seems they are having issues at least from here I can't access atm to verify what's wrong, and is not just here it seems: http://www.downforeveryoneorjustme.com/mail.yandex.ru/

VDVsx ( 2015-02-20 08:45:27 +0200 )edit
3

@Victorious@gehowa - Could you collect logs to see what's happening ?

in

/home/nemo/.config/QtProject/Messageserver.conf

enable file log and add a path for the log, like for example:

[FileLog]
Enabled=1
Path=/home/nemo/Documents/messageserver.log

Reboot the device and reproduce the problem, send me the log file to mail-logs at jolla dot com. After that turn file log off again by setting "enabled" to 0.Thanks a lot!

VDVsx ( 2015-02-20 08:47:31 +0200 )edit
6

answered 2015-02-19 19:38:29 +0200

Trizt gravatar image

Issues with Update 11 early access: I have a number of Android Applications which stopped working after update: Threes (from Humble bundle) E-Code Free Avast Mobile (the background service, lost pin code protection on applications)

Notification icons on the home screen are positioned 1/5th from the top instead of top of the screen (the same applies to the notification screen if you do not have the weather application installed)

Weather application: The notification "icon" can have different temperature/weather than what you see in the "weather overview" accessed from the weather notification "icon" and you may have even a third one if you also run the application too.

Updating weather in the weather application do not affect the weather in the notification screen nor the "weather overview". Updating the weather from the "weather overview" will not affect the app nor the notification "icon".

Having multiple weather location will have no way to access other than the primary weather in notification "icon" or the "weather overview".

The "weather overview" do not display current temperature.

The "powered by Foreca" in the "weather overview" makes the upper part of the screen to be scrollable, moving the icon up to the left top part of the screen would prevent the upper part of the screen be scrollable and give a better end user experience without loosing the partner name from the application.

There is no option to set how often the weather should be updated.

The weather icons looks quite boring, we need to be able to change themes, for example those from meecast.

Had been nice if it had been possible to slide out the weather at the home screen like you do with favourite ambiances, this could be possible both when the phone is locked and unlocked. This far I haven't cfound any use of the home screen at all.

Browser: The up and down arrows, if I hadn't pushed on it, I would never have thought what you meant.

Open tabs is slow at some times.

edit flag offensive delete publish link more

Comments

1

There's something glitchy about the weather app indeed, it seems it doesn't update the data correctly. see these screenshots:

Cover of Weather app and Foreca webpageNote: The weather notification shows the same temperature as the cover and the webpage.

Info in the app

It seems for some reason the "main screen" (the one shown when tapped a location inside the app doesn't update.

About the update interval of the info see this comment: refresh interval of the weather app

raketti ( 2015-02-19 20:30:37 +0200 )edit
3

The weather location name, city name in the notification area has a quite large font. I think it breaks with the overall design. It would be awesome if the primary location would switch to the current actual location of my phone. At least to the closes location configured.

Sören ( 2015-02-20 08:44:01 +0200 )edit
2

I agree with everything you wrote about Weather App! Moreover, was my expectation to can set the App to appear in the lock screen, same as MeeCast..

gordon_pcb_designer ( 2015-02-20 15:12:24 +0200 )edit

Not sure if already mentioned, but in weather app (atleast the one with 1.1.2.15, haven't checked with newest update) when you open app at night (I did so at night between saturday and sunday) let's say a 0:08 o'clock. In my case it should be showing Sunday, but it showed Saturday by default. Maybe this is from last update time? I did try to manually update without a change, so maybe there wasn't updated info at Foreca yet? Anyway not a big issue, but just mentioned.

huuhaa ( 2015-02-26 10:40:29 +0200 )edit
4

answered 2015-02-20 11:08:18 +0200

lispy gravatar image

updated 2015-02-20 11:08:45 +0200

Account creation for carddav in Ownlcoud worked with server: https://domain.de URL: /owncloud/remote.php/carddav/name

Not sure if syncing works, will watch and report. Does anybody know the state of it? Should it work?

edit flag offensive delete publish link more

Comments

2

Doesn't seem to sync.

lispy ( 2015-02-20 15:46:19 +0200 )edit

Question tools

Follow
19 followers

Stats

Asked: 2015-02-19 12:20:22 +0200

Seen: 40,642 times

Last updated: Oct 02 '17