Ask / Submit
156

[Release notes] 1.1.2 / Yliaavanlampi [released]

asked 2015-02-19 12:20:22 +0300

Aard gravatar image

updated 2017-10-02 22:27:37 +0300

olf gravatar image

Update: 03. March, SDK is also available now

Update: We'll roll out 1.1.2.16 to all soon. SDK release will follow soon

This is the early access release of upgrade 11/1.1.2. The current version is 1.1.2.16, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

  • If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
  • Do not reboot the device while the update is in progress.
  • The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

Upgrade version history

Highlights

  • New weather application with events feed integration available through store
  • Browser received a new interface
  • Colours in ambiences can be adjusted
  • Email authentication capabilities can be autodetected
  • Improved low memory handling, now swap is properly taken into accoun

Security fixes

CVE-2013-6393 CVE-2013-6435 CVE-2013-7353 CVE-2013-7354 CVE-2014-2525 CVE-2014-3707 CVE-2014-7824 CVE-2014-8104 CVE-2014-8139 CVE-2014-8140 CVE-2014-8141 CVE-2014-8767 CVE-2014-8768 CVE-2014-8769 CVE-2014-8964 CVE-2014-9112 CVE-2014-9130 CVE-2014-9140 CVE-2014-9293 CVE-2014-9294 CVE-2014-9295

It also contains a fix for an issue in SailfishOS, details will be disclosed after rolling out this update to everyone.

Known issues

OS update process

  • Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
  • OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
    • Delete the file /home/nemo/.cache/store-client/os-info
    • Stop the store-client process (for e.g. pkill store-client)
    • Reopen Settings app, check for updates again and attempt to install the OS update again
  • We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
    • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues ##

  • Sometimes Messages and Phone app show black active covers.
  • calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
  • Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Bugfix and feature highlights

aliendalvik

  • Android runtime should not warn on low battery.
  • Can't erase/delete selected text with Backspace.
  • Cleaning of the clipboard crashes Alien Dalvik.
  • Aliendalvik does not detect mobile data being connected anymore (since 5th Dec 2014).
  • Switching between portrait and landscape messes up swipe gestures in Android apps.
  • Alien screen orientation is wrong sometimes.
  • VKB does not work with aliendalvik/android apps but works with native ones.
  • Set oom_score_adj according to process importance if Sailfish hasn't set it.

buteo-sync-plugin-caldav

  • Use ignore_ssl_errors configuration option

commhistory-daemon

  • Download MMS automatically by default
  • Delete attachments from the filesystem

connman

  • Cancel browser requests if useragent has not returned anything
  • Start/stop ntp activity when TimeUpdates property is changed

cpio

  • Fix CVE-2014-9112

curl

  • Fix CVE-2014-3707

dbus

  • fix CVE-2014-7824

jolla-calendar

  • Fix opening a day page from dbus invoker.

jolla-common-configurations

  • do not allow dhcp-server to change the hostname by default.
  • Enable D-Bus security checking
  • Added color editor and new settings layout.

jolla-keyboard

  • Fixed language selection popup layout.

jolla-settings-accounts

  • Add 'Ignore SSL errors' option.
  • Add missing version for oauth2 plugin for google.
  • Use QMF auth from capabilities.

jolla-settings-networking

  • dim WLAN hotspot when roaming not allowed.

jolla-settings-sailfishos

  • Require 500 Mb disk space for installing the update.

kernel-adaptation-sbj

  • Turn on heap randomization.

libcontacts-qt5

  • Prioritize requests that make app startup more responsive
  • look up address resolve requests in a QHash
  • Schedule resolveAddress immediately

libkeepalive

  • Ignore spurious iphb wakeups.

libpng

  • Upgrade to 1.5.21
  • Fixes out-of-bounds memory access in png_user_version_check()
  • Fixes overflow in png_combine_row with very wide interlaced images
  • Fixes CVE-2013-7354, CVE-2013-7353

libyaml

  • Fix bunch of security vulnerabilities
  • Fix CVE-2013-6393
  • Fix CVE-2014-2525: Heap overflow when parsing YAML tags
  • Fix CVE-2014-9130: assert failure when processing wrapped strings
  • Guard against overflows in indent and flow_level

lipstick-jolla-home-qt5

  • Timers for cellular icons.
  • Disable scrolling to launcher area and lock screen shortcut access during boot busy state.
  • Do not show busy-indicator if wlan is off.
  • Don't show launcher until boot sequence has finished and normal app launch speeds can be guaranteed.
  • Detect apps that failed to load.
  • Make sure to show searching & busy when no networks are found.
  • Don't pop up ConnectionSelector more often than once in 10 sec.

lipstick-qt5

  • Don't attempt to connect signal to a NULL HomeApplication
  • Fix crash on close regression

mce

  • Assume proximity covered while waiting for sensord to start up.
  • Allow user processes to query current memory level over D-Bus.
  • More robust low memory signaling
  • Add enablers for evdev event mapping
  • Enablers for TOHKBD and other hw keyboards
  • Allows actions such as automatic DTMF signaling to proceed when outbound call is answered

ntp

  • Fix CVE-2014-9295, CVE-2014-9294, CVE-2014-9293

openvpn

  • Fix CVE-2014-8104

pcre

  • Fix CVE-2014-8964.

qmf-qt5

  • Mask login information in the IMAP login logging.
  • Handle SMTP response 504.
  • Introduce discovery of authentication from the anounced capabilities(IMAP/SMTP)
  • Mask login information in the SMTP debug logging.
  • Update account lastSyncTime when IMAP IDLE disconnects.

qt5-qtlocation-source

  • Fix crash due to floating point precision issues, and update poly2tri to latest upstream.

rpm

  • Fix CVE-2013-6435

sailfish-components-contacts-qt ####5

  • Fixed SIM import
  • Fix calendar d-bus call on <10 day/month.
  • Don't make RecentContactsList wait for the contactsModel

sailfish-office

  • Add text eliding and text wrap to the details page.
  • fix issue #3: PDFs with mixed orientations not displayed correctly

sbj-configs

  • Adjust vm.swappiness to 50.

tcpdump

  • Fix CVE-2014-8767
  • Fix CVE-2014-8768
  • Fix CVE-2014-8769
  • Fix CVE-2014-9140

transferengine-plugins

  • Fix content height of Twitter image sharing.

unzip

  • Fix CVE-2014-8139, CVE-2014-8140 and CVE-2014-8141
edit retag flag offensive reopen delete

The question has been closed for the following reason "released in a software update" by r0kk3rz
close date 2015-08-26 15:59:47.111998

Comments

8

Sweet! Downloading right now!

nick75 ( 2015-02-19 12:35:26 +0300 )edit
23

is there a chance to get a "reset color" option to revert manual changes to the ambience main color?

dmnk ( 2015-02-19 12:35:46 +0300 )edit

Downloading now, next step BACKUP then upgrade else ......

WilliePre ( 2015-02-19 13:05:31 +0300 )edit
10

@dmnk revert option is implemented but didn't make it with this update

sledges ( 2015-02-19 13:14:40 +0300 )edit
1

downloaded, tried to install (3 times same result)
Sailfish Logo appears, after a few seconds:
update could not be installed, try again later.
(there is enough freespace - btrfs fi show: used 6.13GiB)

rudi ( 2015-02-19 13:26:57 +0300 )edit

41 Answers

Sort by » oldest newest most voted
1

answered 2015-02-24 10:22:29 +0300

MSH gravatar image

updated 2015-02-24 14:02:22 +0300

Update went fine, now using actively since last Friday. So far only alarming thing I have encountered is the browser, which seems to be quite unstable. I doubt it's the OOM-killer since other apps stay at the background but many times opening new tabs from links crash the browser. You should be able to reproduce it by spending some time at www.ampparit.com website, opening links and closing tabs. Sometimes it works for some time before crashing, some times it will crash o first link opened. If possible, it might be a good idea to look into it before public availability.

edit flag offensive delete publish link more
0

answered 2015-02-19 17:07:21 +0300

Whippler gravatar image

seems okey, new browser UI is decent, but the browser is laggy, and seems to consume a load of battery when using.

edit flag offensive delete publish link more
0

answered 2015-02-19 17:21:25 +0300

rudi gravatar image

updated 2015-02-25 21:10:56 +0300

@Nieldk sorry

installation failed several times (all openrepos repositories disabled, enough freespace available)
after deinstallation of clamav (openrepos), installation succeeded

deinstallation was only possible via 'rpm -e --noscripts clamav' (as root), was not possible via warehouse

same behaviour while updating from 1.1.2.15 to 1.1.2.16

edit flag offensive delete publish link more

Comments

@Nieldk , have you had any success?

TheOwlEye ( 2015-02-20 14:43:55 +0300 )edit

I have now updated two devuces. Both with clamav. Neither of them had troubles updating. Actually, update to 1.1.2.15 and then to 1.1.2.16 is the first time ever I didnt have any issues. Will look into clamav, but hard to debug When no faults on my devices.

Nieldk ( 2015-03-03 07:34:26 +0300 )edit
0

answered 2015-02-19 17:33:45 +0300

droll gravatar image

I have noticed with ambience sound customization there is an option to sset “internet call” sound. When will this be used?

edit flag offensive delete publish link more

Comments

6

Why don't you comment about features related to 1.1.2?

Sthocs ( 2015-02-19 18:28:04 +0300 )edit
0

answered 2015-02-20 08:09:56 +0300

TheOwlEye gravatar image

updated 2015-02-20 08:45:58 +0300

update failed, i don't have clamav installed

edit flag offensive delete publish link more
0

answered 2015-02-20 08:45:44 +0300

Sören gravatar image

Custom color picking for an ambiance is great. But how can I switch to the default color taken from the image? And I can only pick a custom color if the ambiance is a favorite.

edit flag offensive delete publish link more

Comments

It's the fourth comment on the main thread.

revert option is implemented but didn't make it with this update

raketti ( 2015-02-20 08:53:36 +0300 )edit

Sorry. Ok.

Sören ( 2015-02-20 08:54:43 +0300 )edit
0

answered 2015-02-20 08:53:37 +0300

Sören gravatar image

The sync interval for my Caldav account was set to manual after update. For my Cardav contacts I see 2 cardav entries in the contact linkage page. Is that a problem?

edit flag offensive delete publish link more

Comments

Oh and it also synced a Facebook name of a linked contanct to the cardav server

Sören ( 2015-02-20 08:57:42 +0300 )edit

And phone numbers are doubled. One time as "Personal | Telephone" or as "Business | Telephone" again as "Personal | Language" and " Personal | Language" and I cannot edit them on the phone. I'll try to setup Caldav up again

Sören ( 2015-02-20 09:04:05 +0300 )edit

Ok, if I delete the Cardav account I can still see the Cardav contacts. In the linkage page I don't see double entries and also double phone numbers are gone. But how to proceed now?!

Sören ( 2015-02-20 09:11:09 +0300 )edit

OK, after deleting the Cardav account I had to delete all contacts manually. Then I did a new setup of the Cardav account and voila all good.

Sören ( 2015-02-20 09:56:37 +0300 )edit
0

answered 2015-02-20 09:46:37 +0300

exel232 gravatar image

Phone shutsdown when trying to open Aptoide, no sifference between Jolla or Official version. I have Google Play installed.

edit flag offensive delete publish link more
0

answered 2015-02-20 10:11:53 +0300

simosagi gravatar image

updated 2015-02-21 12:23:38 +0300

Yesterday I upgraded to 1.1.2.
Today I was reading news with tt-rss application during my bus journey.
Suddenly while scrolling up to see a picture my Jolla rebooted (never happened with that app). The only significant detail of that situation I can think of is that it happened in a point of the trip where the Jolla re-gains GSM connectivity after a road stretch where it has no mobile coverage.

Update: In /var/log/systemboot.log I see at the time of reboot the following:

Startup:  pwr_on_status=pwr_on_by_HW_SMPL

SMPL stands for Sudden Momentary Power Loss, so probably the power regulator at the time of issue detected a dip in the power voltage and it rebooted the device.

My device is otherwise pretty stable (never had any spurious reboots in its ~14 months life) and battery was fully loaded, so I can only assume that the issue was caused by a temporary peak current consumption due to 3G + internet reconnection.

Unless U11 has changed the thresholds for detecting SMPL status, I don't thing my case is actually related to the upgrade.

edit flag offensive delete publish link more

Comments

1

I'll post this in correct question, too, but I had recurring mysterious reboots again. I had forgotten to put a piece of paper in order to push battery more strongly against the connectors, so that caused voltage drops under high load situations, and reboots. I know this sounds kinda wishful thinking, but could you try that? EDIT: Is it reproducible?

Direc ( 2015-02-20 20:00:50 +0300 )edit
0

answered 2015-02-20 11:54:54 +0300

raketti gravatar image

updated 2015-02-23 13:44:55 +0300

Just had an issue with sim-card, see this post: Sim card connection to phone lost

I have never had this issue before, and my phone was just laying on the table, I tapped the screen to wake up the device and when I swiped up, I got the same message as in the above post. After a few seconds (5-10 maybe) the mobile data connection was reset (notification on top saying connected).

EDIT: I did not press either of the options, the data connection was reset on it's own. After I saw the notification of the data connection, I pressed restart later.

EDIT - 2015.02.23: The data connection seems a bit unstable all in all. I have wi-fi turned off, bluetooth on and connected to an external speaker. Just tapped the screen to wake the phone up, swiped from bottom for notifications and opened Viber -> data connection lost for a few seconds and connected automagically again.

EDIT: Same thing happened as before, while waking up the phone and opening the lock screen to enter the security code, data connection was reset.

edit flag offensive delete publish link more

Question tools

Follow
19 followers

Stats

Asked: 2015-02-19 12:20:22 +0300

Seen: 37,470 times

Last updated: Oct 02 '17