We have moved to a new Sailfish OS Forum. Please start new discussions there.

[how to] replace ear/receiver speaker

asked 2015-06-27 13:59:09 +0300

this post is marked as community wiki

This post is a wiki. Anyone with karma >75 is welcome to improve it.

updated 2016-11-08 19:11:24 +0300

pawel gravatar image

Hello there,

both of my speakers were cracking, so i was looking for a way to replace them without sending them to Jolla. @Alex: thanks for your hints

i have used the Nokia Lumia 720 earpiece and HTC One X Loudspeaker. both ordered at BisLinks (U.K.) total costs less then 10 euros

here is a description how to dismantle your Jolla to replace both of them:

remove screws, take care it's two different types, so remember which was where: image description

lift from bottom to remove the black cover image description

there is one screw that holds the metalic edge, again lift from bottom to top image description

now remove one more screw and disconnect circuit board, just lift them gently with a knife or something - the obvious black cable on the left - two near the battery - two at the top on the left image description

then gently lift the circuit board. (on one side is a screw on the other its snapped in) the front camera is glued in, but i was able to get it out together with the board image description

the result: image description

use a screwdriver or a knife to get out the speakers. the original earpiece died during the procedure. i glued the new in with 4 tiny drops of glue

the loudspeaker was easier to remove, the HTC one is self sticking, so no problems here

the only tricky part during assembly are the connectors. be patient ! i spent 15 minutes to connect them all yes the cracking is gone, both do sound better then the originals !

edit retag flag offensive close delete



Have you tried cleaning the earpiece with a strong magnet? Even though the earpiece is protected by some kind of fine fabric mesh it seems that fine metal powder finds its way into the earpiece. This trick is at least worth trying before total disassembly. Might reduce or remove crackling sound but can't of course help with too low sound level that has been there from the factory.

Jusla ( 2015-06-27 17:34:58 +0300 )edit

@Markkyboy: which part is unclear ? dismantle == tear down, cooking receipt == how to i would like to replace ear speaker, so what steps do i need to do after removing toh, removing the screws, and take away the plastic.

pawel ( 2015-06-28 15:37:21 +0300 )edit

@Jusla: will give it a try

pawel ( 2015-06-28 15:37:41 +0300 )edit

@Jusla: no improvement

pawel ( 2015-06-28 20:54:16 +0300 )edit

5 Answers

Sort by » oldest newest most voted

answered 2015-07-17 10:59:58 +0300

Alex gravatar image

I can't give you a tutorial for disassembling your Jolla (it's really straight forward anyway) but I want to mention that it seems that a suitable replacement speaker was found if someone is in the need to replace his broken earpiece speaker:

The user Greendts is mentioning on TMO that a earpiece speaker of a Nokia Lumia 820 will fit perfectly into the Jolla and is working great. :)

edit flag offensive delete publish link more


thanks for the earpiece modell today i did try again to disassamble jolla i can remove the first plastic, then the metal edge, the buttons.. i did remove the screw to lift the circuit board to reach the earpiece but i do not know how to this without breaking any ground wires etc

pawel ( 2015-07-21 22:00:50 +0300 )edit

@pawel If you already got to your earpiece then you just have to lift up your earspeaker carefully e.g. with a small flat-hat screwdriver because the speaker is fixed with some adhesive.

Alex ( 2015-07-22 18:42:21 +0300 )edit

@Alex my current problem is how to lift the circuit board

pawel ( 2015-07-24 07:23:20 +0300 )edit

@pawel You have to remove 6 connections/wires/flex cables to be able to lift up the cicuit board. There is a TMO thread regarding Jolla's internals and an user posted there some pictures which I want to point you at: Jolla with motherboard & just the circuit board.

As you can see from the pictures by comparing the two pictures you will see that you have to remove this one black wire, lift up 4 flex cables and remove this 1 black ribbon cable which is going to the sd-card slot.

For removing this flex cables you have to carefully lilft them up e.g. with a plastic knife like it's done here with a screw driver. On the picture I can't see how to remove this single flex cable going to the sd-card slot exactly and also don't remember myself how to do it anymore (maybe you have to pull it out but don't take me at my word). Later while connecting this flex cables again you have to be extreamly carefull to hit the right position before pushing them back into their position because otherwise you get a damaged phone.

Alex ( 2015-07-24 11:21:19 +0300 )edit

did it today. took pictures on the way. so far nothing broken but the replacement that was delivered today is a wrong one ;-(

pawel ( 2015-07-27 21:14:28 +0300 )edit

answered 2016-11-06 12:33:28 +0300

rzr gravatar image

updated 2016-11-07 06:40:16 +0300

Thanks that really helped

I used this 16x6x2mn part for 0.91EUR

"Ear Piece Earpiece Speaker Replacement Part For Nokia Lumia 700 610 625 720 820 900 920 1020 1320"


This is crosslinked at:


edit flag offensive delete publish link more


Excelletn. I just ordered mine from UK (I prefer European deliveries for some reason) and will make the change on my first one when the part arrives.

Its nice thing to have a phone which is easily disassembled and put back together. None of the those glued together -jobs.

Lupin ( 2018-09-25 19:57:26 +0300 )edit

answered 2015-11-24 14:58:55 +0300

Tenus gravatar image

Repeated instructions today. Took about 20 minutes. Also had to destroy the existing receiver speaker while removing it but it was defect anyway. Otherwise the repair worked perfectly. Thanks!

edit flag offensive delete publish link more


cool, great

pawel ( 2015-11-25 10:55:02 +0300 )edit

answered 2015-11-25 10:02:50 +0300

deedend gravatar image

Wow amazing! Have you considered to copy your guide to iFixit? It cold be very useful for the Jolla owners!

edit flag offensive delete publish link more


no, not yet, need to check how to do that

pawel ( 2015-11-25 10:55:21 +0300 )edit

answered 2016-11-09 22:29:15 +0300

valdueza gravatar image

Thank you very much for the contribution. I had the same problem and have changed one of Nokia and now works great.

edit flag offensive delete publish link more
Login/Signup to Answer

Question tools



Asked: 2015-06-27 13:59:09 +0300

Seen: 3,938 times

Last updated: Nov 09 '16