We have moved to a new Sailfish OS Forum. Please start new discussions there.
0

Jolla Phone / Wi-Fi module HT capabilities

asked 2015-10-24 01:38:10 +0200

Chemist gravatar image

Hi,

Please, anyone, provide the full output of iw list command on the Jolla Phone.

Best regards, Chemist

edit retag flag offensive close delete

1 Answer

Sort by » oldest newest most voted
2

answered 2015-10-24 02:05:32 +0200

SaimenSays gravatar image

updated 2015-10-24 02:06:21 +0200

Don't know why you can't list on your device or why you need it? But here it is...

Wiphy phy0
        Band 1:
                Capabilities: 0x9030
                        HT20
                        Static SM Power Save
                        RX Greenfield
                        RX HT20 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                        L-SIG TXOP protection
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-7
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm)
                        * 2472 MHz [13] (20.0 dBm)
                        * 2484 MHz [14] (disabled)
                Bitrates (non-HT):
                        * 1.0 Mbps
                        * 2.0 Mbps
                        * 5.5 Mbps
                        * 11.0 Mbps
                        * 6.0 Mbps
                        * 9.0 Mbps
                        * 12.0 Mbps
                        * 18.0 Mbps
                        * 24.0 Mbps
                        * 36.0 Mbps
                        * 48.0 Mbps
                        * 54.0 Mbps
        max # scan SSIDs: 9
        max scan IEs length: 200 bytes
        Coverage class: 0 (up to 0m)
        Supported Ciphers:
                * WEP40 (00-0f-ac:1)
                * WEP104 (00-0f-ac:5)
                * TKIP (00-0f-ac:2)
                * CCMP (00-0f-ac:4)
                * WPI-SMS4 (00-14-72:1)
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
        software interface modes (can always be added):
        interface combinations are not supported
        Supported commands:
                 * new_interface
                 * set_interface
                 * new_key
                 * new_beacon
                 * new_station
                 * set_bss
                 * join_ibss
                 * set_pmksa
                 * del_pmksa
                 * flush_pmksa
                 * remain_on_channel
                 * action
                 * frame_wait_cancel
                 * set_channel
                 * connect
                 * disconnect
        Supported TX frame types:
                 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
        Supported RX frame types:
                 * managed: 0x40 0xd0
                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * P2P-client: 0x40 0xd0
                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
        Device supports roaming.
edit flag offensive delete publish link more
Login/Signup to Answer

Stats

Asked: 2015-10-24 01:38:10 +0200

Seen: 225 times

Last updated: Oct 24 '15