Battery Usage after Reset

asked 2014-02-05 18:09:39 +0200

strongm gravatar image

After the latest update to 1.0.3.8 my Jolla stopped providing notifications (discussed elsewhere). With no fix or workaround for this forthcoming I decided to reset the Jolla to factory settings.

Have to admit that I was somewhat surprised to have to then install the two released updates individually (I'd have assumed I could go from factory default to the latest release in one go, but no, don't seem to be able to do that.) Anyway, got everything back up and running - but now my battery is draining at an alarming rate, discharging between 1.5 to 2W according to Powertop, which equates very roughly to 20% battery per hour.

Any ideas?

edit retag flag offensive close delete

Comments

And the system info shows 1.0.3.8. Naamankajärvi, Up to date?

simo ( 2014-02-05 18:12:44 +0200 )edit

Certainly does. That was the whole point, to get to a clean 1.0.3.8 ...

strongm ( 2014-02-05 18:21:11 +0200 )edit

test: terminal -> csd -> Single Test -> discharging (charger not connected). How are the numbers? Does removing TOH have any influence on it?

simo ( 2014-02-05 18:24:35 +0200 )edit

Shows values ranging from approx 130 up to 280 Removing TOH makes no apparent difference

strongm ( 2014-02-05 18:36:03 +0200 )edit

Sounds like a normal power consumption to me... Maybe you run some longer tests to confirm the problem?

simo ( 2014-02-05 18:39:41 +0200 )edit