Revision history [back]

Phone is attached to computer using USB cable. Following messages are present in the kernel log of PC host (Debian Linux):

Dec 25 17:28:46 lomo kernel: [239071.948017] usb 2-1.2: new high-speed USB device number 41 using ehci-pci Dec 25 17:28:46 lomo kernel: [239072.042231] usb 2-1.2: New USB device found, idVendor=2931, idProduct=0afe Dec 25 17:28:46 lomo kernel: [239072.042242] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dec 25 17:28:46 lomo kernel: [239072.042248] usb 2-1.2: Product: Sailfish Dec 25 17:28:46 lomo kernel: [239072.042262] usb 2-1.2: Manufacturer: Jolla Dec 25 17:28:46 lomo kernel: [239072.042264] usb 2-1.2: SerialNumber: DU3C602415 Dec 25 17:28:46 lomo kernel: [239072.043789] usb-storage 2-1.2:1.0: USB Mass Storage device detected Dec 25 17:28:46 lomo kernel: [239072.044085] scsi26 : usb-storage 2-1.2:1.0 Dec 25 17:28:47 lomo kernel: [239073.044875] scsi 26:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 Dec 25 17:28:47 lomo kernel: [239073.045364] sd 26:0:0:0: Attached scsi generic sg2 type 0 Dec 25 17:28:47 lomo kernel: [239073.050247] sd 26:0:0:0: [sdc] Attached SCSI removable disk

When choosing "PC connection" on Jolla, following messages appear:

Dec 25 17:30:17 lomo kernel: [239162.873977] usb 2-1.2: USB disconnect, device number 41 Dec 25 17:30:17 lomo kernel: [239163.136979] usb 2-1.2: new high-speed USB device number 42 using ehci-pci Dec 25 17:30:17 lomo kernel: [239163.234596] usb 2-1.2: New USB device found, idVendor=2931, idProduct=0a01 Dec 25 17:30:17 lomo kernel: [239163.234605] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dec 25 17:30:17 lomo kernel: [239163.234609] usb 2-1.2: Product: Sailfish Dec 25 17:30:17 lomo kernel: [239163.234612] usb 2-1.2: Manufacturer: Jolla Dec 25 17:30:17 lomo kernel: [239163.234615] usb 2-1.2: SerialNumber: DU3C602415

After trying to mount the device using KDE, vfat related errors appear:

Dec 25 17:40:37 lomo kernel: [239783.222281] fat__get_entry: 246 callbacks suppressed Dec 25 17:40:37 lomo kernel: [239783.222286] FAT-fs (sdb): Directory bread(block 2304) failed Dec 25 17:40:37 lomo kernel: [239783.222289] FAT-fs (sdb): Directory bread(block 2305) failed Dec 25 17:40:37 lomo kernel: [239783.222290] FAT-fs (sdb): Directory bread(block 2306) failed Dec 25 17:40:37 lomo kernel: [239783.222292] FAT-fs (sdb): Directory bread(block 2307) failed Dec 25 17:40:37 lomo kernel: [239783.222293] FAT-fs (sdb): Directory bread(block 2308) failed Dec 25 17:40:37 lomo kernel: [239783.222295] FAT-fs (sdb): Directory bread(block 2309) failed Dec 25 17:40:37 lomo kernel: [239783.222296] FAT-fs (sdb): Directory bread(block 2310) failed Dec 25 17:40:37 lomo kernel: [239783.222297] FAT-fs (sdb): Directory bread(block 2311) failed Dec 25 17:40:37 lomo kernel: [239783.222299] FAT-fs (sdb): Directory bread(block 2312) failed Dec 25 17:40:37 lomo kernel: [239783.222300] FAT-fs (sdb): Directory bread(block 2313) failed

The /dev/sdc device disappears. No more messages. Any ides how to mount Jolla's internal storage and/or sdcard on PC?

Phone is attached to computer using USB cable. Following messages are present in the kernel log of PC host (Debian Linux):

Dec 25 17:28:46 lomo kernel: [239071.948017] usb 2-1.2: new high-speed USB device number 41 using ehci-pci ehci-pci

Dec 25 17:28:46 lomo kernel: [239072.042231] usb 2-1.2: New USB device found, idVendor=2931, idProduct=0afe idProduct=0afe

Dec 25 17:28:46 lomo kernel: [239072.042242] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 SerialNumber=3

Dec 25 17:28:46 lomo kernel: [239072.042248] usb 2-1.2: Product: Sailfish Sailfish

Dec 25 17:28:46 lomo kernel: [239072.042262] usb 2-1.2: Manufacturer: Jolla Jolla

Dec 25 17:28:46 lomo kernel: [239072.042264] usb 2-1.2: SerialNumber: DU3C602415 DU3C602415

Dec 25 17:28:46 lomo kernel: [239072.043789] usb-storage 2-1.2:1.0: USB Mass Storage device detected detected

Dec 25 17:28:46 lomo kernel: [239072.044085] scsi26 : usb-storage 2-1.2:1.0 2-1.2:1.0

Dec 25 17:28:47 lomo kernel: [239073.044875] scsi 26:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 2

Dec 25 17:28:47 lomo kernel: [239073.045364] sd 26:0:0:0: Attached scsi generic sg2 type 0 0

Dec 25 17:28:47 lomo kernel: [239073.050247] sd 26:0:0:0: [sdc] Attached SCSI removable disk

When choosing "PC connection" on Jolla, following messages appear:

Dec 25 17:30:17 lomo kernel: [239162.873977] usb 2-1.2: USB disconnect, device number 41 41

Dec 25 17:30:17 lomo kernel: [239163.136979] usb 2-1.2: new high-speed USB device number 42 using ehci-pci ehci-pci

Dec 25 17:30:17 lomo kernel: [239163.234596] usb 2-1.2: New USB device found, idVendor=2931, idProduct=0a01 idProduct=0a01

Dec 25 17:30:17 lomo kernel: [239163.234605] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 SerialNumber=3

Dec 25 17:30:17 lomo kernel: [239163.234609] usb 2-1.2: Product: Sailfish Sailfish

Dec 25 17:30:17 lomo kernel: [239163.234612] usb 2-1.2: Manufacturer: Jolla Jolla

Dec 25 17:30:17 lomo kernel: [239163.234615] usb 2-1.2: SerialNumber: DU3C602415

After trying to mount the device using KDE, vfat related errors appear:

Dec 25 17:40:37 lomo kernel: [239783.222281] fat__get_entry: 246 callbacks suppressed suppressed

Dec 25 17:40:37 lomo kernel: [239783.222286] FAT-fs (sdb): Directory bread(block 2304) failed failed

Dec 25 17:40:37 lomo kernel: [239783.222289] FAT-fs (sdb): Directory bread(block 2305) failed failed

Dec 25 17:40:37 lomo kernel: [239783.222290] FAT-fs (sdb): Directory bread(block 2306) failed failed

Dec 25 17:40:37 lomo kernel: [239783.222292] FAT-fs (sdb): Directory bread(block 2307) failed failed

Dec 25 17:40:37 lomo kernel: [239783.222293] FAT-fs (sdb): Directory bread(block 2308) failed failed

Dec 25 17:40:37 lomo kernel: [239783.222295] FAT-fs (sdb): Directory bread(block 2309) failed failed

Dec 25 17:40:37 lomo kernel: [239783.222296] FAT-fs (sdb): Directory bread(block 2310) failed failed

Dec 25 17:40:37 lomo kernel: [239783.222297] FAT-fs (sdb): Directory bread(block 2311) failed failed

Dec 25 17:40:37 lomo kernel: [239783.222299] FAT-fs (sdb): Directory bread(block 2312) failed failed

Dec 25 17:40:37 lomo kernel: [239783.222300] FAT-fs (sdb): Directory bread(block 2313) failed

The /dev/sdc device disappears. No more messages. Any ides how to mount Jolla's internal storage and/or sdcard on PC?

Phone is attached to computer using USB cable. Following messages are present in the kernel log of PC host (Debian Linux):

Dec 25 17:28:46 lomo kernel: [239071.948017] usb 2-1.2: new high-speed USB device number 41 using ehci-pci

Dec 25 17:28:46 lomo kernel: [239072.042231] usb 2-1.2: New USB device found, idVendor=2931, idProduct=0afe

Dec 25 17:28:46 lomo kernel: [239072.042242] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

Dec 25 17:28:46 lomo kernel: [239072.042248] usb 2-1.2: Product: Sailfish

Dec 25 17:28:46 lomo kernel: [239072.042262] usb 2-1.2: Manufacturer: Jolla

Dec 25 17:28:46 lomo kernel: [239072.042264] usb 2-1.2: SerialNumber: DU3C602415

Dec 25 17:28:46 lomo kernel: [239072.043789] usb-storage 2-1.2:1.0: USB Mass Storage device detected

Dec 25 17:28:46 lomo kernel: [239072.044085] scsi26 : usb-storage 2-1.2:1.0

Dec 25 17:28:47 lomo kernel: [239073.044875] scsi 26:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2

Dec 25 17:28:47 lomo kernel: [239073.045364] sd 26:0:0:0: Attached scsi generic sg2 type 0

Dec 25 17:28:47 lomo kernel: [239073.050247] sd 26:0:0:0: [sdc] Attached SCSI removable disk

When choosing "PC connection" on Jolla, following messages appear:

Dec 25 17:30:17 lomo kernel: [239162.873977] usb 2-1.2: USB disconnect, device number 41

Dec 25 17:30:17 lomo kernel: [239163.136979] usb 2-1.2: new high-speed USB device number 42 using ehci-pci

Dec 25 17:30:17 lomo kernel: [239163.234596] usb 2-1.2: New USB device found, idVendor=2931, idProduct=0a01

Dec 25 17:30:17 lomo kernel: [239163.234605] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

Dec 25 17:30:17 lomo kernel: [239163.234609] usb 2-1.2: Product: Sailfish

Dec 25 17:30:17 lomo kernel: [239163.234612] usb 2-1.2: Manufacturer: Jolla

Dec 25 17:30:17 lomo kernel: [239163.234615] usb 2-1.2: SerialNumber: DU3C602415

After trying to mount the device using KDE, vfat related errors appear:

Dec 25 17:40:37 lomo kernel: [239783.222281] fat__get_entry: 246 callbacks suppressed

Dec 25 17:40:37 lomo kernel: [239783.222286] FAT-fs (sdb): Directory bread(block 2304) failed

Dec 25 17:40:37 lomo kernel: [239783.222289] FAT-fs (sdb): Directory bread(block 2305) failed

Dec 25 17:40:37 lomo kernel: [239783.222290] FAT-fs (sdb): Directory bread(block 2306) failed

Dec 25 17:40:37 lomo kernel: [239783.222292] FAT-fs (sdb): Directory bread(block 2307) failed

Dec 25 17:40:37 lomo kernel: [239783.222293] FAT-fs (sdb): Directory bread(block 2308) failed

Dec 25 17:40:37 lomo kernel: [239783.222295] FAT-fs (sdb): Directory bread(block 2309) failed

Dec 25 17:40:37 lomo kernel: [239783.222296] FAT-fs (sdb): Directory bread(block 2310) failed

Dec 25 17:40:37 lomo kernel: [239783.222297] FAT-fs (sdb): Directory bread(block 2311) failed

Dec 25 17:40:37 lomo kernel: [239783.222299] FAT-fs (sdb): Directory bread(block 2312) failed

Dec 25 17:40:37 lomo kernel: [239783.222300] FAT-fs (sdb): Directory bread(block 2313) failed

The /dev/sdc device disappears. No more messages. Any ides how to mount Jolla's internal storage and/or sdcard on PC?