Revision history [back]
 | 1 | initial version | posted 2017-10-11 09:51:10 +0200  |
[bug] [2.1.2.3] Intex AquaFish not connecting to office wifi
Sailfish has added enterprize wifi support in this 2.1.2.3 version so I thought I would check it out by trying to connect to my office wifi network.
First I used ssu re etc commands to update my phone to 2.1.2.3 and then brought it to office to test this.
The network details are as below: Security: 802.1x EAP EAP Method: PEAP Phase-2 Authentication: None CA Certificate: Unspecified Anonymous Identity: EMPTY Proxy: None IPV4 Settings: DHCP
When I connected to it on first try: I was asked for username/password. I entered them. Then browser opened and captive portal login was shown. I logged in and accepted the agreement.
After this we are supposed to disconnect from wifi and reconnect. When I did this, I found out AquaFish was no more able to connect to this network.
By some fluke it managed to connect successfully only once. It worked for 2-3 hours, but then again nothing.
Dmesg logs seen in case of failure: [E :VOS] vos_mem_malloc: called with invalid arg 0 !!! [E: PE] limStripOffExtCapIE: 89: unable to allocate memory to store addn IE [E: PE] limProcessAssocFailureTimeout: 4613: (Re)Assoc Failure Timeout Occurred. wlan connection failed with [addr] result:3 and Status:7
The phone is able to connect to my other phone's hot-spot with WPA2 security without any issues. Only issues are with the office WiFi.
Please help!
| | 2 | retagged |
[bug] [2.1.2.3] Intex AquaFish not connecting to office wifi
Sailfish has added enterprize wifi support in this 2.1.2.3 version so I thought I would check it out by trying to connect to my office wifi network.
First I used ssu re etc commands to update my phone to 2.1.2.3 and then brought it to office to test this.
The network details are as below: Security: 802.1x EAP EAP Method: PEAP Phase-2 Authentication: None CA Certificate: Unspecified Anonymous Identity: EMPTY Proxy: None IPV4 Settings: DHCP
When I connected to it on first try: I was asked for username/password. I entered them. Then browser opened and captive portal login was shown. I logged in and accepted the agreement.
After this we are supposed to disconnect from wifi and reconnect. When I did this, I found out AquaFish was no more able to connect to this network.
By some fluke it managed to connect successfully only once. It worked for 2-3 hours, but then again nothing.
Dmesg logs seen in case of failure: [E :VOS] vos_mem_malloc: called with invalid arg 0 !!! [E: PE] limStripOffExtCapIE: 89: unable to allocate memory to store addn IE [E: PE] limProcessAssocFailureTimeout: 4613: (Re)Assoc Failure Timeout Occurred. wlan connection failed with [addr] result:3 and Status:7
The phone is able to connect to my other phone's hot-spot with WPA2 security without any issues. Only issues are with the office WiFi.
Please help!
| | 3 | No.3 Revision |
[bug] [2.1.2.3] Intex AquaFish not connecting to office wifiEnterprise WiFi with MSChapV2 auth
Sailfish has added enterprize wifi support in this 2.1.2.3 version so I thought I would check it out by trying to connect to my office wifi network.
First I used ssu re etc commands to update my phone to 2.1.2.3 and then brought it to office to test this.
The network details are as below: Security: 802.1x EAP EAP Method: PEAP Phase-2 Authentication: None CA Certificate: Unspecified Anonymous Identity: EMPTY Proxy: None IPV4 Settings: DHCP
When I connected to it on first try: I was asked for username/password. I entered them. Then browser opened and captive portal login was shown. I logged in and accepted the agreement.
After this we are supposed to disconnect from wifi and reconnect. When I did this, I found out AquaFish was no more able to connect to this network.
By some fluke it managed to connect successfully only once. It worked for 2-3 hours, but then again nothing.
Dmesg logs seen in case of failure: [E :VOS] vos_mem_malloc: called with invalid arg 0 !!! [E: PE] limStripOffExtCapIE: 89: unable to allocate memory to store addn IE [E: PE] limProcessAssocFailureTimeout: 4613: (Re)Assoc Failure Timeout Occurred. wlan connection failed with [addr] result:3 and Status:7
The phone is able to connect to my other phone's hot-spot with WPA2 security without any issues. Only issues are with the office WiFi.
Please help!
| | 4 | retagged |
[bug] [2.1.2.3] Intex AquaFish not connecting to Enterprise WiFi with MSChapV2 auth
Sailfish has added enterprize wifi support in this 2.1.2.3 version so I thought I would check it out by trying to connect to my office wifi network.
First I used ssu re etc commands to update my phone to 2.1.2.3 and then brought it to office to test this.
The network details are as below: Security: 802.1x EAP EAP Method: PEAP Phase-2 Authentication: None CA Certificate: Unspecified Anonymous Identity: EMPTY Proxy: None IPV4 Settings: DHCP
When I connected to it on first try: I was asked for username/password. I entered them. Then browser opened and captive portal login was shown. I logged in and accepted the agreement.
After this we are supposed to disconnect from wifi and reconnect. When I did this, I found out AquaFish was no more able to connect to this network.
By some fluke it managed to connect successfully only once. It worked for 2-3 hours, but then again nothing.
Dmesg logs seen in case of failure: [E :VOS] vos_mem_malloc: called with invalid arg 0 !!! [E: PE] limStripOffExtCapIE: 89: unable to allocate memory to store addn IE [E: PE] limProcessAssocFailureTimeout: 4613: (Re)Assoc Failure Timeout Occurred. wlan connection failed with [addr] result:3 and Status:7
The phone is able to connect to my other phone's hot-spot with WPA2 security without any issues. Only issues are with the office WiFi.
Please help!