We have moved to a new Sailfish OS Forum. Please start new discussions there.
1 | initial version | posted 2018-04-24 14:47:13 +0200 |
First, some system details: this is Sailfish X on F5122 (dual-sim) hardware, with installed jolla-settings-networking-multisim
but without any other multisim tweaks (and only one SIM in use).
In Settings -> SIM cards it's possible to disable the SIM card by touching the checkbox. If you disable it, the controls are replaced with the "No SIM card inserted" screen and thus you cannot re-enable the SIM card.
The modem (or the SIM card slot) stays permanently disabled, even over reboots. The phone does not even request the PIN. As an exception, starting the CSD tool and opening the SIM card test temporarily enables it while the test screen is open.
If you need to exit this "no SIM" state, you can manually enable the modem with the following command:
sh
dbus-send --system --print-reply --dest=org.ofono / org.nemomobile.ofono.ModemManager.SetEnabledModems array:objpath:/ril_0
(the command does not require root
access)
I don't know whether this bug can be reproduced on any standard Sailfish configuration.
2 | No.2 Revision |
First, some system details: this is Sailfish X 2.1.4.14 on F5122 (dual-sim) hardware, with installed jolla-settings-networking-multisim
but without any other multisim tweaks (and only one SIM in use).
In Settings -> SIM cards it's possible to disable the SIM card by touching the checkbox. If you disable it, the controls are replaced with the "No SIM card inserted" screen and thus you cannot re-enable the SIM card.
The modem (or the SIM card slot) stays permanently disabled, even over reboots. The phone does not even request the PIN. As an exception, starting the CSD tool and opening the SIM card test temporarily enables it while the test screen is open.
If you need to exit this "no SIM" state, you can manually enable the modem with the following command:
sh
dbus-send --system --print-reply --dest=org.ofono / org.nemomobile.ofono.ModemManager.SetEnabledModems array:objpath:/ril_0
(the command does not require root
access)
I don't know whether this bug can be reproduced on any standard Sailfish configuration.
3 | No.3 Revision |
First, some system details: this is Sailfish X 2.1.4.14 on F5122 (dual-sim) hardware, with installed jolla-settings-networking-multisim
but without any other multisim tweaks (and only one SIM in use).
In Settings -> SIM cards it's possible to disable the SIM card by touching the checkbox. If you disable it, the controls are replaced with the "No SIM card inserted" screen and thus you cannot re-enable the SIM card.
The modem (or the SIM card slot) stays permanently disabled, even over reboots. The phone does not even request the PIN. As an exception, starting the CSD tool and opening the SIM card test temporarily enables it while the test screen is open.
If you need to exit this "no SIM" state, you can manually enable the modem with the following command:
sh
dbus-send --system --print-reply --dest=org.ofono / org.nemomobile.ofono.ModemManager.SetEnabledModems array:objpath:/ril_0
(the command does not require root
access)
I don't know whether this bug can be reproduced on any standard Sailfish configuration.
First, some system details: this is Sailfish X 2.1.4.14 on F5122 (dual-sim) hardware, with installed jolla-settings-networking-multisim
but without any other multisim tweaks (and only one SIM in use).
In Settings -> SIM cards it's possible to disable the SIM card by touching the checkbox. If you disable it, the controls are replaced with the "No SIM card inserted" screen and thus you cannot re-enable the SIM card.
The modem (or the SIM card slot) stays permanently disabled, even over reboots. The phone does not even request the PIN. As an exception, starting the CSD tool and opening the SIM card test temporarily enables it while the test screen is open.
If you need to exit this "no SIM" state, you can manually enable the modem with the following command:
sh
dbus-send --system --print-reply --dest=org.ofono / org.nemomobile.ofono.ModemManager.SetEnabledModems array:objpath:/ril_0
(the command does not require root
access)
I don't know whether this bug can be reproduced on any standard Sailfish configuration.
5 | retagged |
First, some system details: this is Sailfish X 2.1.4.14 on F5122 (dual-sim) hardware, with installed jolla-settings-networking-multisim
but without any other multisim tweaks (and only one SIM in use).
In Settings -> SIM cards it's possible to disable the SIM card by touching the checkbox. If you disable it, the controls are replaced with the "No SIM card inserted" screen and thus you cannot re-enable the SIM card.
The modem (or the SIM card slot) stays permanently disabled, even over reboots. The phone does not even request the PIN. As an exception, starting the CSD tool and opening the SIM card test temporarily enables it while the test screen is open.
If you need to exit this "no SIM" state, you can manually enable the modem with the following command:
sh
dbus-send --system --print-reply --dest=org.ofono / org.nemomobile.ofono.ModemManager.SetEnabledModems array:objpath:/ril_0
(the command does not require root
access)
I don't know whether this bug can be reproduced on any standard Sailfish configuration.