Revision history - together.jolla.com

How to create a copy of all partitions (Cómo crear una copia de todas las particiones)

How to create a copy of all partitions

This procedure I had to do with Fat32, since Ext4 and Btrfs failed me, when mounting a folder in the microSD. If you manage to run Ext4, you will save many problems. Probably, I had them because the copy I made was from Sailfish 1.0.5.

Previous steps, probably not necessary: Start in your Jolla account on the phone. Activate developer mode.

Previous steps required: Turn off your phone. Insert microSD of minimum 32 GB (with 16 GB may be very fair), format Ext4, preferably. In this guide I will explain the steps necessary for Fat32 and I will say what steps can be omitted if Ext4 is used. Remove battery. Access Recovery mode (Vol- and power key while inserting battery, no cables). When the phone vibrates, stop pressing the buttons. If you do not get to the Recovery and only Fastboot, upgrade to a higher version (and then if you want to reset the phone to return to the previous version). With this the Recovery will be fixed. It worked for me.

Main steps: I recommend using Linux for this, it will save a lot of time. Maybe when the guide is finished, add some steps of Windows. We started the terminal. sudo telnet 10.42.66.66 4 Enter Y mkdir -p / mnt / BackupCard mount / dev / mmcblk1p1 / mnt / BackupCard /

Most important steps: A bit of information, there are 28 partitions (in addition to zram0, there may also be zram1, but this on my mobile was not found on my mobile). The most important and heaviest partition is mmcblk0p28. This partition takes about 15 GB, so if we use Fat32 we will have to split the copies. We start with this partition:

dd if=/dev/mmcblk0p28 of=/mnt/BackupCard/jolla-fullBackup-p28a.img bs=1024 count=3145728

dd if=/dev/mmcblk0p28 of=/mnt/BackupCard/jolla-fullBackup-p28b.img bs=1024 count=3145728 skip=3145728

dd if=/dev/mmcblk0p28 of=/mnt/BackupCard/jolla-fullBackup-p28c.img bs=1024 count=3145728 skip=6291456

dd if=/dev/mmcblk0p28 of=/mnt/BackupCard/jolla-fullBackup-p28d.img bs=1024 count=3145728 skip=9437184

dd if=/dev/mmcblk0p28 of=/mnt/BackupCard/jolla-fullBackup-p28e.img bs=1024 count=3145728 skip=12582912

dd if=/dev/mmcblk0p28 of=/mnt/BackupCard/jolla-fullBackup-p28f.img bs=1024 count=3145728 skip=15728640

Img28f.img I was left empty, but I created the copy just in case. In the case that you have to make more copies of mmcblk0p28, sumad 3145728 to 'count'. And change the name of the IMG, put the following letter (g, h, i, j ...).

Copies of the following partitions are much easier, since they do not take up much. Anyway, I always add a letter (a, b, c, d ...) to the name of each partition in case it takes 3 GB or more.

dd if=/dev/mmcblk0p1 of=/mnt/BackupCard/jolla-fullBackup-p1a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p2 of=/mnt/BackupCard/jolla-fullBackup-p2a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p3 of=/mnt/BackupCard/jolla-fullBackup-p3a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p4 of=/mnt/BackupCard/jolla-fullBackup-p4a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p5 of=/mnt/BackupCard/jolla-fullBackup-p5a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p6 of=/mnt/BackupCard/jolla-fullBackup-p6a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p7 of=/mnt/BackupCard/jolla-fullBackup-p7a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p8 of=/mnt/BackupCard/jolla-fullBackup-p8a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p9 of=/mnt/BackupCard/jolla-fullBackup-p9a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p10 of=/mnt/BackupCard/jolla-fullBackup-p10a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p11 of=/mnt/BackupCard/jolla-fullBackup-p11a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p12 of=/mnt/BackupCard/jolla-fullBackup-p12a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p13 of=/mnt/BackupCard/jolla-fullBackup-p13a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p14 of=/mnt/BackupCard/jolla-fullBackup-p14a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p15 of=/mnt/BackupCard/jolla-fullBackup-p15a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p16 of=/mnt/BackupCard/jolla-fullBackup-p16a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p17 of=/mnt/BackupCard/jolla-fullBackup-p17a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p18 of=/mnt/BackupCard/jolla-fullBackup-p18a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p19 of=/mnt/BackupCard/jolla-fullBackup-p19a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p20 of=/mnt/BackupCard/jolla-fullBackup-p20a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p21 of=/mnt/BackupCard/jolla-fullBackup-p21a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p22 of=/mnt/BackupCard/jolla-fullBackup-p22a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p23 of=/mnt/BackupCard/jolla-fullBackup-p23a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p24 of=/mnt/BackupCard/jolla-fullBackup-p24a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p25 of=/mnt/BackupCard/jolla-fullBackup-p25a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p26 of=/mnt/BackupCard/jolla-fullBackup-p26a.img bs=1024 count=3145728 dd if=/dev/mmcblk0p27 of=/mnt/BackupCard/jolla-fullBackup-p27a.img bs=1024 count=3145728

Español:

Cómo crear una copia de todas las particiones

Este procedimiento lo tuve que realizar con Fat32, ya que Ext4 y Btrfs me fallaban, al montar una carpeta en la microSD. Si consigues hacer funcionar Ext4, te ahorrarás muchos problemas. Problablemente, yo los tuviera porque la copia que hice fue de Sailfish 1.0.5.

Pasos previos, probablemente no necesarios: Iniciar en tu cuenta Jolla en el teléfono. Activar modo desarrolador.

Pasos previos necesarios: Apagar el teléfono. Insertar microSD de mínimo 32 GB (con 16 GB quizá sea muy justo), formato Ext4, preferiblemente. En esta guía explicaré los pasos necesarios para Fat32 y diré qué pasos se pueden omitir si se usa Ext4. Quitar batería. Acceder al modo Recovery (Vol- y tecla de encendido mientras se inserta la batería, no cables). Cuando el teléfono vibre, dejar de presionar los botones. Si no consigues entrar al Recovery y solo a Fastboot, actualiza a una versión superior (y luego si quieres restablece el teléfono para volver a la versión anterior). Con esto el Recovery se habrá arreglado. A mí me funcionó.

Pasos principales: Recomiendo usar Linux para esto, ahorrá bastante tiempo. Quizá cuando termine la guía, añada algunos pasos de Windows. Iniciamos la terminal. sudo telnet 10.42.66.66 4 Enter y mkdir -p /mnt/BackupCard mount /dev/mmcblk1p1 /mnt/BackupCard/

Pasos más importantes: Un poco de información, hay 28 particiones (además de zram0, también puede haber zram1, pero esta en mi móvil no se encontró en mi móvil). La partición más importante y la más pesada es mmcblk0p28. Esta partición ocupa alrededor de 15 GB, así que si usamos Fat32 tendremos que dividir las copias. Empezamos con esta partición: