Revision history [back]

I have updated my Intex Aqua Fish to release 3.0.0.5 via ssh and terminal commands last week. I realized several problems:

1. Camera controls for broghtness do not work
2. Disabling VPN is not possible in the system settings. I have to restart the device.
3. Sometimes enabled WLAN makes the system extremely slow, if a public WLAN is available.
4. Resetting network with Sailfish Utilities doesn't work properly. I have to restart, sometimes shutdown and start the device.

Therefore I thought to update the device from 3.0.0.5 to 3.0.0.8.

[root@Sailfish nemo]# ssu re 3.0.0.8 
Changing release from 3.0.0.5 to 3.0.0.8
Your device is now in release mode!
[root@Sailfish nemo]# version --dup
REFRESHING CACHE AND DOWNLOADING PACKAGES
Resolving: 100%
Error: This request will break your system!
Finished transaction (status=2, runtime=91929ms)
...
UPGRADE NOT COMPLETE - Retry 9 of 9
Waiting 30 seconds before retry.
REFRESHING CACHE AND DOWNLOADING PACKAGES
Resolving: 100%
Error: This request will break your system!
Finished transaction (status=2, runtime=90210ms)
FINISHING

The upgrade could NOT be finished. Make sure you have
a working Internet Connection and SSU is propertly set up. In
case the repos are changing rapidly (e.g. during development),
just restarting the upgrade might fix the issue.

REBOOT AT YOUR OWN RISK.

Instead of rebooting, I switched the system back to 3.0.0.5 to avoid a factory reset. This causes the same error. I have not rebooted the system, yet. Some recommendations, what to do?

I have updated my Intex Aqua Fish to release 3.0.0.5 via ssh and terminal commands last week. I realized several problems:

1. Camera controls for broghtness do not work
2. Disabling VPN is not possible in the system settings. I have to restart the device.
3. Sometimes enabled WLAN makes the system extremely slow, if a public WLAN is available.
4. Resetting network with Sailfish Utilities doesn't work properly. I have to restart, sometimes shutdown and start the device.

Therefore I thought to update the device from 3.0.0.5 to 3.0.0.8.

[root@Sailfish nemo]# ssu re 3.0.0.8 
Changing release from 3.0.0.5 to 3.0.0.8
Your device is now in release mode!
[root@Sailfish nemo]# version --dup
REFRESHING CACHE AND DOWNLOADING PACKAGES
Resolving: 100%
Error: This request will break your system!
Finished transaction (status=2, runtime=91929ms)
...
UPGRADE NOT COMPLETE - Retry 9 of 9
Waiting 30 seconds before retry.
REFRESHING CACHE AND DOWNLOADING PACKAGES
Resolving: 100%
Error: This request will break your system!
Finished transaction (status=2, runtime=90210ms)
FINISHING

The upgrade could NOT be finished. Make sure you have
a working Internet Connection and SSU is propertly set up. In
case the repos are changing rapidly (e.g. during development),
just restarting the upgrade might fix the issue.

REBOOT AT YOUR OWN RISK.

Instead of rebooting, I switched the system back to 3.0.0.5 to avoid a factory reset. This causes the same error. I have not rebooted the system, yet. Some recommendations, what to do?