Revision history [back]

Hi!

I managed to unlock my XA2 H4113 variant fine by following the instructions in https://jolla.com/sailfishx-windows-instructions-xa2/.

But when I try to flash by running flash-on-windows.bat (I am on Windows 7), after md5sum verification I get:

Searching a compatible device...
find: 'secure:': No such file or directory

This device has not been unlocked for the flashing. Please follow the
instructions how to unlock your device at the following webpage:
https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/

If I run the same batchfile with admin priviledges, after a failed md5sum verification I get:

Searching a compatible device...

The device is unlocked for the flashing process. Continuing..

Found '' that will be used as vendor image. Continuing..

The Sony Vendor partition image was not found in the current
directory. Please download it from https://developer.sony.com/file/download/soft
ware-binaries-for-aosp-oreo-android-8-1-kernel-4-4-nile/
and unzip it into this directory.

I got the Sailfish_OS-Jolla-3.0.1.14-h4113-0.0.7.13.zip package. I have tried with 8.1.6.4_r1_v16_nile and 8.1.6.4_r1_v17B_nile SW binary images in the same directory as flash-on-windows.bat (and the rest of the files). On boot the device gives a "lock open" image, instructing to lock the bootloader. In settings it also states that bootloader is unlocked (and can't be changed), USB debugging is enabled too.

Not sure how to proceed

Pheet

Hi!

I managed to unlock my XA2 H4113 variant fine by following the instructions in https://jolla.com/sailfishx-windows-instructions-xa2/.

But when I try to flash by running flash-on-windows.bat (I am on Windows 7), after md5sum verification I get:

Searching a compatible device...
find: 'secure:': No such file or directory

This device has not been unlocked for the flashing. Please follow the
instructions how to unlock your device at the following webpage:
https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/

If I run the same batchfile with admin priviledges, after a failed md5sum verification I get:

Searching a compatible device...

The device is unlocked for the flashing process. Continuing..

Found '' that will be used as vendor image. Continuing..

The Sony Vendor partition image was not found in the current
directory. Please download it from https://developer.sony.com/file/download/soft
ware-binaries-for-aosp-oreo-android-8-1-kernel-4-4-nile/
and unzip it into this directory.

I got the Sailfish_OS-Jolla-3.0.1.14-h4113-0.0.7.13.zip package. I have tried with 8.1.6.4_r1_v16_nile and 8.1.6.4_r1_v17B_nile SW binary images in the same directory as flash-on-windows.bat (and the rest of the files). On boot the device gives a "lock open" image, instructing to lock the bootloader. In settings it also states that bootloader is unlocked (and can't be changed), USB debugging is enabled too.

Not sure how to proceed

Pheet