Revision history [back]
 | 1 | initial version | posted 2019-04-27 15:10:05 +0200  |
Sailfish X: USB OTG doesn't work anymore with USB stick
I try to connect my USB stick with an USB OTG cable to my Sailfish X. Unfortunately, it's no longer working after deinstallation of
https://openrepos.net/content/kimmoli/usbstick-utils
I checked that udisks2 is installed. I even have it reinstalled, but without any improvement.
That's the dmesg output :
[ 4326.667051] SMBCHG: usbid_change_handler: triggered
[ 4326.667239] FG: fg_power_set_property: psp 0, val = 2
[ 4326.667361] msm_otg 78db000.usb: select port USB1
[ 4326.677631] msm_otg 78db000.usb: phy_reset: success
[ 4326.785166] msm_otg 78db000.usb: USB exited from low power mode
[ 4326.925935] msm_hsusb_host msm_hsusb_host: EHCI Host Controller
[ 4326.925978] msm_hsusb_host msm_hsusb_host: new USB bus registered, assigned bus number 1
[ 4326.930506] msm_hsusb_host msm_hsusb_host: irq 166, io mem 0x078db000
[ 4326.944181] msm_hsusb_host msm_hsusb_host: USB 2.0 started, EHCI 1.00
[ 4326.944323] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4326.944335] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4326.944346] usb usb1: Product: EHCI Host Controller
[ 4326.944355] usb usb1: Manufacturer: Linux 3.10.84 ehci_hcd
[ 4326.944365] usb usb1: SerialNumber: msm_hsusb_host
[ 4326.945935] hub 1-0:1.0: USB hub found
[ 4326.945960] hub 1-0:1.0: 1 port detected
[ 4326.946700] platform 184c030.qcom,gdsc: Driver gdsc requests probe deferral
[ 4327.049025] msm_otg 78db000.usb: USB in low power mode
| | 2 | No.2 Revision |
Sailfish X: USB OTG doesn't work anymore with USB stick
I try to connect my USB stick with an USB OTG cable to my Sailfish X. Unfortunately, it's no longer working after deinstallation of
https://openrepos.net/content/kimmoli/usbstick-utils
I checked that udisks2 is installed. I even have it reinstalled, but without any improvement.
That's the dmesg output :
[ 4326.667051] SMBCHG: usbid_change_handler: triggered
[ 4326.667239] FG: fg_power_set_property: psp 0, val = 2
[ 4326.667361] msm_otg 78db000.usb: select port USB1
[ 4326.677631] msm_otg 78db000.usb: phy_reset: success
[ 4326.785166] msm_otg 78db000.usb: USB exited from low power mode
[ 4326.925935] msm_hsusb_host msm_hsusb_host: EHCI Host Controller
[ 4326.925978] msm_hsusb_host msm_hsusb_host: new USB bus registered, assigned bus number 1
[ 4326.930506] msm_hsusb_host msm_hsusb_host: irq 166, io mem 0x078db000
[ 4326.944181] msm_hsusb_host msm_hsusb_host: USB 2.0 started, EHCI 1.00
[ 4326.944323] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4326.944335] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4326.944346] usb usb1: Product: EHCI Host Controller
[ 4326.944355] usb usb1: Manufacturer: Linux 3.10.84 ehci_hcd
[ 4326.944365] usb usb1: SerialNumber: msm_hsusb_host
[ 4326.945935] hub 1-0:1.0: USB hub found
[ 4326.945960] hub 1-0:1.0: 1 port detected
[ 4326.946700] platform 184c030.qcom,gdsc: Driver gdsc requests probe deferral
[ 4327.049025] msm_otg 78db000.usb: USB in low power mode
Does anybody has an idea, how to get it working back again? From my understanding it should be working now out of the box in SFOS 3.