Revision history [back]

Hello folks,

I have tried to compile libmlocale which is partially autotools based thus it needs running ./configure.

My build fails with:

RPM build errors:
/var/tmp/rpm-tmp.L4oyur: line 41: ./configure: Permission denied
error: Bad exit status from /var/tmp/rpm-tmp.L4oyur (%build)
    Bad exit status from /var/tmp/rpm-tmp.L4oyur (%build)

It turned out that if I ssh to the build machine and check the sources location the file permissions are not having the executable flag:

[root@SailfishSDK libmlocale]# ls -l
total 204
-rwxr-xr-x 1 mersdk mersdk 26850 Jan  5  2018 LICENSE.LGPL
**-rwxr-xr-x 1 mersdk mersdk 26210 Sep 19 20:25 Makefile**
-rwxr-xr-x 1 mersdk mersdk   545 Jan  5  2018 README
drwxr-xr-x 1 mersdk mersdk  4096 Jan  7  2018 RPMS
drwxr-xr-x 1 mersdk mersdk  4096 Sep 19 20:20 benchmarks
-rwxr-xr-x 1 mersdk mersdk 18284 Sep 19 20:20 configure
...

While on the host:

mm@lapos:~/Projektek/jolla/libmlocale$ ls -l
összesen 204
drwxrwxr-x  8 mm mm  4096 szept 19 22:20 benchmarks
**-rwxr-xr-x  1 mm mm 18284 szept 19 22:20 configure**
-rw-r--r--  1 mm mm  4258 jan    7  2018 debugfiles.list
-rw-r--r--  1 mm mm  4214 jan    7  2018 debuglinks.list
-rw-r--r--  1 mm mm    66 jan    7  2018 debugsources.list
drwxrwxr-x  4 mm mm  4096 jan    5  2018 doc
-rw-r--r--  1 mm mm     0 jan    7  2018 documentation.list
drwxrwxr-x  2 mm mm  4096 szept 19 22:27 lib
-rw-rw-r--  1 mm mm 26850 jan    5  2018 LICENSE.LGPL
-rw-rw-r--  1 mm mm 26210 szept 19 22:25 Makefile

The vbox share mounted with the following options:

src1 on /home/src1 type vboxsf (rw,nodev,relatime)

I suspect the VirtualBox to be responsible for this problem (similar problems can be found on the web). Usually it is recommended to install the Guest additions. It turned out that I run VirtualBox 5.2.32 while the Guest additions installed in the build machine is 5.3.20 (since it is a patch revision difference it should not matter). I have tried to update Guest addidions, but it requres the kernel headers which is not present on the system.

Hello folks,

I have tried to compile libmlocale which is partially autotools based thus it needs running ./configure.

My build fails with:

RPM build errors:
/var/tmp/rpm-tmp.L4oyur: line 41: ./configure: Permission denied
error: Bad exit status from /var/tmp/rpm-tmp.L4oyur (%build)
    Bad exit status from /var/tmp/rpm-tmp.L4oyur (%build)

It turned out that if I ssh to the build machine and check the sources location the file permissions are not having the executable flag:

[root@SailfishSDK libmlocale]# [mersdk@SailfishSDK libmlocale]$ ls -l
total 204
-rwxr-xr-x 1 mersdk mersdk 196
-rw-r--r-- 1 mersdk 1001 26850 Jan  5  2018 LICENSE.LGPL
**-rwxr-xr-x 1 mersdk mersdk 26210 -rw-r--r-- 1 mersdk 1001 24890 Sep 19 20:25 Makefile**
-rwxr-xr-x 1 mersdk mersdk 21:14 Makefile
-rw-r--r-- 1 mersdk 1001   545 Jan  5  2018 README
drwxr-xr-x 1 mersdk mersdk 1001  4096 Jan  7  2018 Sep 19 21:14 RPMS
drwxr-xr-x 1 mersdk mersdk 1001  4096 Sep 19 20:20 benchmarks
-rwxr-xr-x 1 mersdk mersdk -rw-r--r-- 1 mersdk 1001 18284 Sep 19 20:20 configure
...
-rw-r--r-- 1 mersdk 1001  4258 Jan  7  2018 debugfiles.list

While on the host:

mm@lapos:~/Projektek/jolla/libmlocale$ ls -l
összesen 204
drwxrwxr-x  8 mm mm  4096 szept 19 22:20 benchmarks
**-rwxr-xr-x  1 mm mm 18284 szept 19 22:20 configure**
-rw-r--r--  1 mm mm  4258 jan    7  2018 debugfiles.list
-rw-r--r--  1 mm mm  4214 jan    7  2018 debuglinks.list
-rw-r--r--  1 mm mm    66 jan    7  2018 debugsources.list
drwxrwxr-x  4 mm mm  4096 jan    5  2018 doc
-rw-r--r--  1 mm mm     0 jan    7  2018 documentation.list
drwxrwxr-x  2 mm mm  4096 szept 19 22:27 lib
-rw-rw-r--  1 mm mm 26850 jan    5  2018 LICENSE.LGPL
-rw-rw-r--  1 mm mm 26210 szept 19 22:25 Makefile

The vbox share mounted with the following options:

src1 on /home/src1 type vboxsf (rw,nodev,relatime)

First I suspect suspected the VirtualBox to be responsible for this problem (similar problems can be found on the web). Usually it is recommended to install the Guest additions. It turned out that I run VirtualBox 5.2.32 while the Guest additions installed in the build machine is 5.3.20 (since it is a patch revision difference it should not matter). I have tried to update Guest addidions, but it requres the kernel headers which is not present on the system.

Hello folks,

I have tried to compile libmlocale which is partially autotools based thus it needs running ./configure.

My build fails with:

RPM build errors:
/var/tmp/rpm-tmp.L4oyur: line 41: ./configure: Permission denied
error: Bad exit status from /var/tmp/rpm-tmp.L4oyur (%build)
    Bad exit status from /var/tmp/rpm-tmp.L4oyur (%build)

It turned out that if I ssh to the build machine and check the sources location the file permissions are not having the executable flag:

[mersdk@SailfishSDK libmlocale]$ ls -l
total 196
-rw-r--r-- 1 mersdk 1001 26850 Jan  5  2018 LICENSE.LGPL
-rw-r--r-- 1 mersdk 1001 24890 Sep 19 21:14 Makefile
-rw-r--r-- 1 mersdk 1001   545 Jan  5  2018 README
drwxr-xr-x 1 mersdk 1001  4096 Sep 19 21:14 RPMS
drwxr-xr-x 1 mersdk 1001  4096 Sep 19 20:20 benchmarks
-rw-r--r-- 1 mersdk 1001 18284 Sep 19 20:20 configure
-rw-r--r-- 1 mersdk 1001  4258 Jan  7  2018 debugfiles.list

While on the host:

mm@lapos:~/Projektek/jolla/libmlocale$ ls -l
összesen 204
drwxrwxr-x  8 mm mm  4096 szept 19 22:20 benchmarks
**-rwxr-xr-x  1 mm mm 18284 szept 19 22:20 configure**
-rw-r--r--  1 mm mm  4258 jan    7  2018 debugfiles.list
-rw-r--r--  1 mm mm  4214 jan    7  2018 debuglinks.list
-rw-r--r--  1 mm mm    66 jan    7  2018 debugsources.list
drwxrwxr-x  4 mm mm  4096 jan    5  2018 doc
-rw-r--r--  1 mm mm     0 jan    7  2018 documentation.list
drwxrwxr-x  2 mm mm  4096 szept 19 22:27 lib
-rw-rw-r--  1 mm mm 26850 jan    5  2018 LICENSE.LGPL
-rw-rw-r--  1 mm mm 26210 szept 19 22:25 Makefile

First I suspected the VirtualBox to be responsible for this problem (similar problems can be found on the web). Usually it is recommended to install the Guest additions. It turned out that I run VirtualBox 5.2.32 while the Guest additions installed in the build machine is 5.3.20 (since it is a patch revision difference it should not matter). I have tried to update Guest addidions, but it requres the kernel headers which is not present on the system.

Then it turned out that the files under /home/src have all executable bit set, while paths under /home/mersdk/share/ do not.

Hello folks,

I have tried to compile libmlocale which is partially autotools based thus it needs running ./configure.

My build fails with:

RPM build errors:
/var/tmp/rpm-tmp.L4oyur: line 41: ./configure: Permission denied
error: Bad exit status from /var/tmp/rpm-tmp.L4oyur (%build)
    Bad exit status from /var/tmp/rpm-tmp.L4oyur (%build)

It turned out that if I ssh to the build machine and check the sources location the file permissions are not having the executable flag:

[mersdk@SailfishSDK libmlocale]$ ls -l
total 196
-rw-r--r-- 1 mersdk 1001 26850 Jan  5  2018 LICENSE.LGPL
-rw-r--r-- 1 mersdk 1001 24890 Sep 19 21:14 Makefile
-rw-r--r-- 1 mersdk 1001   545 Jan  5  2018 README
drwxr-xr-x 1 mersdk 1001  4096 Sep 19 21:14 RPMS
drwxr-xr-x 1 mersdk 1001  4096 Sep 19 20:20 benchmarks
-rw-r--r-- 1 mersdk 1001 18284 Sep 19 20:20 configure
-rw-r--r-- 1 mersdk 1001  4258 Jan  7  2018 debugfiles.list

While on the host:

mm@lapos:~/Projektek/jolla/libmlocale$ ls -l
összesen 204
drwxrwxr-x  8 mm mm  4096 szept 19 22:20 benchmarks
**-rwxr-xr-x  1 mm mm 18284 szept 19 22:20 configure**
-rw-r--r--  1 mm mm  4258 jan    7  2018 debugfiles.list
-rw-r--r--  1 mm mm  4214 jan    7  2018 debuglinks.list
-rw-r--r--  1 mm mm    66 jan    7  2018 debugsources.list
drwxrwxr-x  4 mm mm  4096 jan    5  2018 doc
-rw-r--r--  1 mm mm     0 jan    7  2018 documentation.list
drwxrwxr-x  2 mm mm  4096 szept 19 22:27 lib
-rw-rw-r--  1 mm mm 26850 jan    5  2018 LICENSE.LGPL
-rw-rw-r--  1 mm mm 26210 szept 19 22:25 Makefile

First I suspected the VirtualBox to be responsible for this problem (similar problems can be found on the web). Usually it is recommended to install the Guest additions. It turned out that I run VirtualBox 5.2.32 while the Guest additions installed in the build machine is 5.3.20 (since it is a patch revision difference it should not matter). I have tried to update Guest addidions, but it requres the kernel headers which is not present on the system.

Then it turned out that the files under /home/src have all executable bit set, while paths under /home/mersdk/share/ do not.

Hello folks,

I have tried to compile libmlocale which is partially autotools based thus it needs running ./configure.

My build fails with:

RPM build errors:
/var/tmp/rpm-tmp.L4oyur: line 41: ./configure: Permission denied
error: Bad exit status from /var/tmp/rpm-tmp.L4oyur (%build)
    Bad exit status from /var/tmp/rpm-tmp.L4oyur (%build)

It turned out that if I ssh to the build machine and check the sources location the file permissions are not having the executable flag:

[mersdk@SailfishSDK libmlocale]$ ls -l
total 196
-rw-r--r-- 1 mersdk 1001 26850 Jan  5  2018 LICENSE.LGPL
-rw-r--r-- 1 mersdk 1001 24890 Sep 19 21:14 Makefile
-rw-r--r-- 1 mersdk 1001   545 Jan  5  2018 README
drwxr-xr-x 1 mersdk 1001  4096 Sep 19 21:14 RPMS
drwxr-xr-x 1 mersdk 1001  4096 Sep 19 20:20 benchmarks
-rw-r--r-- 1 mersdk 1001 18284 Sep 19 20:20 configure
-rw-r--r-- 1 mersdk 1001  4258 Jan  7  2018 debugfiles.list

While on the host:

mm@lapos:~/Projektek/jolla/libmlocale$ ls -l
összesen 204
drwxrwxr-x  8 mm mm  4096 szept 19 22:20 benchmarks
**-rwxr-xr-x  1 mm mm 18284 szept 19 22:20 configure**
-rw-r--r--  1 mm mm  4258 jan    7  2018 debugfiles.list
-rw-r--r--  1 mm mm  4214 jan    7  2018 debuglinks.list
-rw-r--r--  1 mm mm    66 jan    7  2018 debugsources.list
drwxrwxr-x  4 mm mm  4096 jan    5  2018 doc
-rw-r--r--  1 mm mm     0 jan    7  2018 documentation.list
drwxrwxr-x  2 mm mm  4096 szept 19 22:27 lib
-rw-rw-r--  1 mm mm 26850 jan    5  2018 LICENSE.LGPL
-rw-rw-r--  1 mm mm 26210 szept 19 22:25 Makefile

First I suspected the VirtualBox to be responsible for this problem (similar problems can be found on the web). Usually it is recommended to install the Guest additions. It turned out that I run VirtualBox 5.2.32 while the Guest additions installed in the build machine is 5.3.20 (since it is a patch revision difference it should not matter). I have tried to update Guest addidions, but it requres the kernel headers which is not present on the system.

Then it turned out that the files under /home/src have all executable bit set, while paths under /home/mersdk/share/ do not.