Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
sysstemctl restart sailfish-devicelosk-encfsa-fpd It's been working normally for a while

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
```

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
```

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelosk-encfsa-fpd It's been working normally for a while

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelosk-encfsa-fpd It's been working normally for a while

Device: XA2 Plus

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelosk-encfsa-fpd It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelosk-encfsa-fpd It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug): 1. set some time out for lock device (automatic lock) 2. open any application ( native, or android app) 3. off screen by pressing power button ( or close cover) 4. press power button again ( or open case ) - device screen is show lock screen 5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but desctop is not shown

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelosk-encfsa-fpd It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug): 1.

1. set some time out for lock device (automatic lock) 2. lock)
2. open any application ( native, or android app) 3. app)
3. off screen by pressing power button ( or close cover) 4. cover)
4. press power button again ( or open case ) - device screen is show lock screen 5. screen
5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but desctop is not shown
   shown

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelosk-encfsa-fpd It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug):

1. set some time out for lock device (automatic lock)
2. open any application ( native, or android app)
3. off screen by pressing power button ( or close cover)
4. press power button again ( or open case ) - device screen is show lock screen
5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but desctop is home screen will not shown show

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelosk-encfsa-fpd It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug):

1. set some time out for lock device (automatic lock)
2. open any application ( native, or android app)
3. off screen by pressing power button ( or close cover)
4. press power button again ( or open case ) - device screen is show lock screen
5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but home screen will not show

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelosk-encfsa-fpd It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug):

1. set some time out for lock device (automatic lock)
2. open any application ( native, or android app)
3. off screen by pressing power button ( or close cover)
4. press power button again ( or open case ) - device screen is show lock screen
5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but home screen will not show

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelosk-encfsa-fpd sailfish-devicelock-encfsa-fpd It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug):

1. set some time out for lock device (automatic lock)
2. open any application ( native, or android app)
3. off screen by pressing power button ( or close cover)
4. press power button again ( or open case ) - device screen is show lock screen
5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but home screen will not show

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelock-encfsa-fpd It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug):

1. set some time out for lock device (automatic lock)
2. open any application ( native, or android app)
3. off screen by pressing power button ( or close cover) cover), while app is opened (you shouldn't see home screen or notifications area)
4. press power button again ( or open case ) - device screen is show lock screen
5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but home screen will not show

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelock-encfsa-fpd It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug):

1. set some time out for lock device (automatic lock)
2. open any application ( native, or android app)
3. off screen by pressing power button ( or close cover), while app is opened (you shouldn't see home screen or notifications area) area at this moment)
4. press power button again ( or open case ) - device screen is show lock screen
5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but home screen will not show

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelock-encfsa-fpd
It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug):

1. set some time out for lock device (automatic lock)
2. open any application ( native, or android app)
3. off screen by pressing power button ( or close cover), while app is opened (you shouldn't see home screen or notifications area at this moment)
4. press power button again ( or open case ) - device screen is show lock screen
5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but home screen will not show

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelock-encfsa-fpd
It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug):

1. set some time out for lock device (automatic lock)
2. open any application ( native, or android app)
3. off screen by pressing power button ( or close cover), while app is opened (you shouldn't see home screen or notifications area at this moment)
4. press power button again ( or open case ) - device screen is show lock screen
5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but home screen will not show

Sometimes Sailfish won't unlock your device with a fingerprint and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelock-encfsa-fpd
It's been working normally for a while

Device: XA2 Plus

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint

How to reproduce (its seems i found a way how to check this bug):

1. set some time out for lock device (automatic lock)
2. open any application ( native, or android app)
3. off screen by pressing power button ( or close cover), while app is opened (you shouldn't see home screen or notifications area at this moment)
4. press power button again ( or open case ) - device screen is show lock screen
5. try unlock device with fingerprint (really it not locked and just need swipe on screen) - device is vibrate, but home screen will not show

Sometimes Sailfish won't unlock your the device with a fingerprint in case automatic locking is configured and won't ask for a key code, just unlock your device without a key code or fingerprint.
After i restart fingerprint device lock service
systemctl restart sailfish-devicelock-encfsa-fpd
It's been working normally for a while

Device:

Affected: XA2, XA2 Plus and possible all devices with fingerprint sensor

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerpint code/fingerprint

How to reproduce (its seems i found a way how to check this bug):

1. set some Set an automatic lock time out for lock device (automatic lock)
2. open in Settings > Device lock
3. Open any application ( native, (native, or android app)
4. Turn the screen off screen by pressing the power button ( or (or close cover), while the app is opened (you shouldn't see home screen or notifications area at this moment)
5. press Press the power button again ( or (or open case ) the case) - device screen is show lock screen
6. try the device screen now correctly shows the lock screen
7. Try to unlock device with fingerprint (really it your fingerprint. The device is not locked and just need now as the automatic lock time did not pass yet. However, now you cannot open the home screen with your fingerprint, you need to swipe on screen) - device is vibrate, the screen. Using the fingerprint sensor now only let's the device vibrate (fingerprint is recognized, but home screen will not showwon't show up)

17.12.2019 in 3.2.1.20 bug still there

Sailfish won't unlock the device with a fingerprint in case automatic locking is configured and

Affected: XA2, XA2 Plus and possible all devices with fingerprint sensor

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerprint

How to reproduce (its seems i found a way how to check make this bug): bug occur):

1. Set an automatic lock time in Settings > Device lock
2. Open any application (native, or android app)
3. Turn the screen off by pressing the power button (or close cover), while the app is opened (you shouldn't see home screen or notifications area at this moment)
4. Press the power button again (or open the case) - the device screen now correctly shows the lock screen
5. Try to unlock device with your fingerprint. The device touch screen is not locked now as the automatic lock time did not pass yet. However, now you cannot open the home screen with your fingerprint, you need to swipe the screen. Using the fingerprint sensor now only let's the device vibrate (fingerprint is recognized, but home screen won't show up)

Expected behavior: Home screen is shown if the lock screen is after the fingerprint was recognised (be the touch screen locked or not).

Also affects

• 3.2.1.20
• 3.3.0.14

Sailfish won't unlock the device with a fingerprint in case automatic locking is configured and

Affected: XA2, XA2 Plus and possible all devices with fingerprint sensor

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerprint

How to reproduce (its seems i found a way how to make this bug occur):

1. Set an automatic lock time in Settings > Device lock
2. Open any application (native, or android app)
3. Turn the screen off by pressing the power button (or close cover), while the app is opened (you shouldn't see home screen or notifications area at this moment)
4. Press the power button again (or open the case) - the device screen now correctly shows the lock screen
5. Try to unlock device with your fingerprint. The touch screen is not locked now as the automatic lock time did not pass yet. However, now you cannot open the home screen with your fingerprint, you need to swipe the screen. Using the fingerprint sensor now only let's the device vibrate (fingerprint is recognized, but home screen won't show up)

Expected behavior: Home screen is shown after the fingerprint was is recognised (be the touch screen locked or not).

Also affects

• 3.2.1.20
• 3.3.0.14

Sailfish won't unlock the device with a fingerprint in case automatic locking is configured and

Affected: XA2, XA2 Plus and possible all devices with fingerprint sensor

Added: when i set lock device without timeout - its look work normal, but i use timeout for locking device with code/fingerprint

How to reproduce (its seems i found a way how to make this bug occur):

1. Set an automatic lock time in Settings > Device lock
2. Open any application (native, or android app)
3. Turn the screen off by pressing the power button (or close cover), while the app is opened (you shouldn't see home screen or notifications area at this moment)
4. Press the power button again (or open the case) - the device screen now correctly shows the lock screen
5. Try to unlock device with your fingerprint. The touch screen is not locked now as the automatic lock time did not pass yet. However, now you cannot open the home screen with your fingerprint, you need to swipe the screen. Using the fingerprint sensor now only let's the device vibrate (fingerprint is recognized, but home screen won't show up)

Expected behavior: Home screen is shown after the fingerprint is recognised (be the touch screen locked or not).

Also affects

• 3.2.1.20
• 3.3.0.14

Sailfish won't unlock the device switch from lock screen to home screen with a fingerprint in case automatic locking is configured and to happen in 5/10/30/60 minutes or "not in use".

Affected: XA2, XA2 Plus and possible all devices with a fingerprint sensor

Added: when i there is no problem in the following cases: - if "automatic locking" (of the touch display) is set lock device without timeout to "no delay" - its look work normal, but i use timeout for locking device with code/fingerprint if "automatic locking" (of the touch display) is set to "5/10/30/60 minutes" and the given number of minutes has elapsed from the last user action (so the touch screen was truly locked)

How to reproduce (its seems i found a way how to make this bug occur):

1. Set an automatic lock time in Settings > Device lock
2. Open any application (native, or android app)
3. Turn the screen off by pressing the power button (or close cover), while the app is opened (you shouldn't see home screen or notifications area at this moment)
4. Press the power button again (or open the case) - the device screen now correctly shows the lock screen
5. Try to unlock device with your fingerprint. The touch screen is not locked now as the automatic lock time did not pass yet. However, now you cannot open the home screen with your fingerprint, fingerprint but you need to swipe the screen. Using the fingerprint sensor now only let's the device vibrate (fingerprint is recognized, but home screen won't show up)

Expected behavior: Home screen is shown after the fingerprint is recognised (be the touch screen locked or not).

Also affects

• 3.2.1.20
• 3.3.0.14

Sailfish won't switch from lock screen to home screen with a fingerprint in case automatic locking is configured to happen in 5/10/30/60 minutes or "not in use".

Affected: XA2, XA2 Plus and possible all devices with a fingerprint sensorsensor.

Added: there is no problem in the following cases: cases:
- if "automatic locking" (of the touch display) is set to "no delay" delay"
- if "automatic locking" (of the touch display) is set to "5/10/30/60 minutes" and the given number of minutes has elapsed from the last user action (so the touch screen was truly locked) locked)

How to reproduce (its seems i found a way how to make this bug occur):

1. Set an automatic lock time in Settings > Device lock
2. Open any application (native, or android app)
3. Turn the screen off by pressing the power button (or close cover), while the app is opened (you shouldn't see home screen or notifications area at this moment)
4. Press the power button again (or open the case) - the device screen now correctly shows the lock screen
5. Try to unlock device with your fingerprint. The touch screen is not locked now as the automatic lock time did not pass yet. However, you cannot open the home screen with your fingerprint but you need to swipe the screen. Using the fingerprint sensor now only let's the device vibrate (fingerprint is recognized, but home screen won't show up)

Expected behavior: Home screen is shown after the fingerprint is recognised (be the touch screen locked or not).

Also affects

• 3.2.1.20
• 3.3.0.14

Sailfish won't switch from lock screen to home screen with a fingerprint in case automatic locking is configured to happen in 5/10/30/60 minutes or "not in use".

Affected: XA2, XA2 Plus Plus, 10 and possible all devices with a fingerprint sensor.

Added: there is no problem in the following cases:
- if "automatic locking" (of the touch display) is set to "no delay"
- if "automatic locking" (of the touch display) is set to "5/10/30/60 minutes" and the given number of minutes has elapsed from the last user action (so the touch screen was truly locked)

How to reproduce (its seems i found a way how to make this bug occur):

1. Set an automatic lock time in Settings > Device lock
2. Open any application (native, or android app)
3. Turn the screen off by pressing the power button (or close cover), while the app is opened (you shouldn't see home screen or notifications area at this moment)
4. Press the power button again (or open the case) - the device screen now correctly shows the lock screen
5. Try to unlock device with your fingerprint. The touch screen is not locked now as the automatic lock time did not pass yet. However, you cannot open the home screen with your fingerprint but you need to swipe the screen. Using the fingerprint sensor now only let's the device vibrate (fingerprint is recognized, but home screen won't show up)

Expected behavior: Home screen is shown after the fingerprint is recognised (be the touch screen locked or not).

Also affects

• 3.2.1.20
• 3.3.0.14

Sailfish won't switch from lock screen to home screen with a fingerprint in case automatic locking is configured to happen in 5/10/30/60 minutes or "not in use".

Affected: XA2, XA2 Plus, 10 and possible all devices with a fingerprint sensor.

Added: there is no problem in the following cases:
- if "automatic locking" (of the touch display) is set to "no delay"
- if "automatic locking" (of the touch display) is set to "5/10/30/60 minutes" and the given number of minutes has elapsed from the last user action (so the touch screen was truly locked)

How to reproduce (its seems i found a way how to make this bug occur):

1. Set an automatic lock time in Settings > Device lock
2. Open any application (native, or android app)
3. Turn the screen off by pressing the power button (or close cover), while the app is opened (you shouldn't see home screen or notifications area at this moment)
4. Press the power button again (or open the case) - the device screen now correctly shows the lock screen
5. Try to unlock device with your fingerprint. The touch screen is not locked now as the automatic lock time did not pass yet. However, you cannot open the home screen with your fingerprint but you need to swipe the screen. Using the fingerprint sensor now only let's the device vibrate (fingerprint is recognized, but home screen won't show up)

Expected behavior: Home screen is shown after the fingerprint is recognised (be the touch screen locked or not).

Also affects

• 3.2.1.20
• 3.3.0.14

Sailfish won't switch from lock screen to home screen with a fingerprint in case automatic locking is configured to happen in 5/10/30/60 minutes or "not in use".

Affected: XA2, XA2 Plus, 10 and possible all devices with a fingerprint sensor.

Added: there Added:
There is no problem in the following cases:
- if "automatic locking" (of the touch display) is set to "no delay"
- if "automatic locking" (of the touch display) is set to "5/10/30/60 minutes" and the given number of minutes has elapsed from the last user action (so the touch screen was truly locked)

How to reproduce (its seems i found a way how to make this bug occur):

1. Set an automatic lock time in Settings > Device lock
2. Open any application (native, or android app)
3. Turn the screen off by pressing the power button (or close cover), while the app is opened (you shouldn't see home screen or notifications area at this moment)
4. Press the power button again (or open the case) - the device screen now correctly shows the lock screen
5. Try to unlock device with your fingerprint. The touch screen is not locked now as the automatic lock time did not pass yet. However, you cannot open the home screen with your fingerprint but you need to swipe the screen. Using the fingerprint sensor now only let's the device vibrate (fingerprint is recognized, but home screen won't show up)

Expected behavior: Home screen is shown after the fingerprint is recognised (be the touch screen locked or not).

Also affects

• 3.2.1.20
• 3.3.0.14

EDIT/2020-04-16/jovirkku: 1) Clarified the description 2) Also happens on Xperia 10.

Sailfish won't switch from lock screen to home screen with a fingerprint in case automatic locking is configured to happen in 5/10/30/60 minutes or "not in use".

Affected: XA2, XA2 Plus, 10 and possible all devices with a fingerprint sensor.

Added:
There is no problem in the following cases:
- if "automatic locking" (of the touch display) is set to "no delay"
- if "automatic locking" (of the touch display) is set to "5/10/30/60 minutes" and the given number of minutes has elapsed from the last user action (so the touch screen was truly locked)

How to reproduce (its seems i found a way how to make this bug occur):

1. Set an automatic lock time in Settings > Device lock
2. Open any application (native, or android app)
3. Turn the screen off by pressing the power button (or close cover), while the app is opened (you shouldn't see home screen or notifications area at this moment)
4. Press the power button again (or open the case) - the device screen now correctly shows the lock screen
5. Try to unlock device with your fingerprint. The touch screen is not locked now as the automatic lock time did not pass yet. However, you cannot open the home screen with your fingerprint but you need to swipe the screen. Using the fingerprint sensor now only let's the device vibrate (fingerprint is recognized, but home screen won't show up)

Expected behavior: Home screen is shown after the fingerprint is recognised (be the touch screen locked or not).

NOTE: After step 3 (when the screen is black/blank), if you do not use the Power key but skip step 4 completely, THEN step 5 works fine: the fingerprint gets recognised (vibra) and the home screen appears. No problem at all.

Also affects

• 3.2.1.20
• 3.3.0.14

EDIT/2020-04-16/jovirkku: 1) Clarified the description 2) Also happens on Xperia 10.10 3) Note added.