We have moved to a new Sailfish OS Forum. Please start new discussions there.
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Lots of helpers and some special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.
2 | No.2 Revision |
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Lots of helpers and some special Special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.
3 | No.3 Revision |
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.
4 | No.4 Revision |
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If you do have openrepos enabled on your device, disable all of them before you do the upgrade. Otherwise there's a high chance of your device getting broken.
We have implemented disabling of additional repositories before system updates with this release. This will come into effect next update onwards.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.
5 | No.5 Revision |
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If you do have openrepos enabled on your device, disable all of them before you do the upgrade. Otherwise there's a high chance of your device getting broken.broken.
Read important-steps-to-do-before-updating post for more information.
We have implemented disabling of additional repositories before system updates with this release. This will come into effect next update onwards.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If you do have openrepos enabled on your device, disable all of them before you do the upgrade. Otherwise there's a high chance of your device getting broken. Read important-steps-to-do-before-updating post for more information.
We have implemented disabling of additional repositories before system updates with this release. This will come into effect next update onwards.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.
7 | No.7 Revision |
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If you do have openrepos OpenRepos enabled on your device, disable all of them before you do the upgrade. Otherwise there's a high chance of your device getting broken.
Read important-steps-to-do-before-updating post for more information.
We have implemented disabling of additional repositories before system updates with this release. This will come into effect next update onwards.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.
8 | retagged |
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If you do have OpenRepos enabled on your device, disable all of them before you do the upgrade. Otherwise there's a high chance of your device getting broken. Read important-steps-to-do-before-updating post for more information.
We have implemented disabling of additional repositories before system updates with this release. This will come into effect next update onwards.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.
9 | retagged |
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If you do have OpenRepos enabled on your device, disable all of them before you do the upgrade. Otherwise there's a high chance of your device getting broken. Read important-steps-to-do-before-updating post for more information.
We have implemented disabling of additional repositories before system updates with this release. This will come into effect next update onwards.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If you do have OpenRepos enabled on your device, disable all of them before you do the upgrade. Otherwise there's a high chance of your device getting broken. Read important-steps-to-do-before-updating post for more information.
We have implemented disabling of additional repositories before system updates with this release. This will come into effect next update onwards.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.
11 | retagged |
Release date: 17.3.2014
Download size: ~200MB
Ohijärvi is our fourth software update since sales start and it's packed with a wide array of intriguing new features, as well as many visual and performance improvements.
We appreciate how patiently you have waited for this update and we really want to thank you for working so hard with us on t.j.c. Special thanks to Simo Ruoho, Timo Kuitunen, Kimmo Lindholm, Tomi Tiittanen and Samuli Järvinen.
You need a working Jolla account configured on your device in order to receive update notifications. If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
It is recommended to have the charger connected before attempting to upgrade the device.
If you do have OpenRepos enabled on your device, disable all of them before you do the upgrade. Otherwise there's a high chance of your device getting broken. Read important-steps-to-do-before-updating post for more information.
We have implemented disabling of additional repositories before system updates with this release. This will come into effect next update onwards.
If your Jolla is connected to WLAN network, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do __not__ reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You may awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
We are continuously working to improve the quality of the software on your Jolla. Some issues may take longer to find permanent solutions. Therefore, we have listed below a few workarounds for the most prevalent issues.
If you hit any of these issues (or any others) then please report them here on t.j.c and together we'll find a way to make it better.