Revision history [back]

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended and that screen stays on for a while. Normal behavior was and should be returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call I locked the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting".

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant.

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended and that screen stays on for a while. Normal behavior was was, and should be be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call I locked call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting".waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant.pleasant. The Jolla is unusable at this moment!

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

strong text UPDATE 17-05-2016 I'm not sure if the problem is solved, one time I had a similiar issue but it also could be that there was no network coverage. To be continued.

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

UPDATE 17-05-2016 I'm not sure if the problem is solved, one time I had a similiar issue but it also could be that there was no network coverage. To be continued.22-08-2016 Problem still present, even with JollaC

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

UPDATE 22-08-2016 Problem still present, even with JollaC

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

UPDATE 22-08-2016 Problem still present, even with JollaC

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

I or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

I Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

UPDATE*UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC.*

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

*UPDATEPLEASE SEND LOGS TO JOLLA

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC.*JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

PLEASE SEND LOGS TO JOLLA(care@jolla.zendesk.com You can refer to issue #28354)

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've rebooted the phone -I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

PLEASE SEND LOGS TO JOLLA(care@jolla.zendesk.com You can refer to issue #28354)

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug. -I've bug.

• I've rebooted the phone -I've phone
• I've removed the battery for about 30 minutes and rebooted the phone afterwards. -I've afterwards.
• I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

PLEASE SEND LOGS TO JOLLA(care@jolla.zendesk.com You can refer to issue #28354)

*Present since 2014!!!*

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug.

• I've rebooted the phone
• I've removed the battery for about 30 minutes and rebooted the phone afterwards.
• I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

PLEASE SEND LOGS TO JOLLA(care@jolla.zendesk.com You can refer to issue #28354)

*Present **Present since 2014!!!**

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug.

• I've rebooted the phone
• I've removed the battery for about 30 minutes and rebooted the phone afterwards.
• I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

PLEASE SEND LOGS TO JOLLA(care@jolla.zendesk.com You can refer to issue #28354)

**Present since 2014!!!**

UPDATE 06-04-2017 Still present in 2.1.0.11 on AquaFish/JollaC

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug.

• I've rebooted the phone
• I've removed the battery for about 30 minutes and rebooted the phone afterwards.
• I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

PLEASE SEND LOGS TO JOLLA(care@jolla.zendesk.com You can refer to issue #28354)

**Present since 2014!!!2014**

UPDATE 06-04-2017 Still present in 2.1.0.11 on AquaFish/JollaC

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug.

• I've rebooted the phone
• I've removed the battery for about 30 minutes and rebooted the phone afterwards.
• I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

PLEASE SEND LOGS TO JOLLA(care@jolla.zendesk.com You can refer to issue #28354)

**Present since 2014**

UPDATE 06-04-2017 Still present in 2.1.0.11 on AquaFish/JollaC

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug.

• I've rebooted the phone
• I've removed the battery for about 30 minutes and rebooted the phone afterwards.
• I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

PLEASE SEND LOGS TO JOLLA(care@jolla.zendesk.com You can refer to issue #28354)#28354). See below how to create and send logs.

**Present since 2014**

UPDATE 06-04-2017 Still present in 2.1.0.11 on AquaFish/JollaC

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug.

• I've rebooted the phone
• I've removed the battery for about 30 minutes and rebooted the phone afterwards.
• I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

PLEASE SEND LOGS TO JOLLA(care@jolla.zendesk.com You can refer to issue #28354). See below how to create and send logs.

**Present since 2014**

UPDATE 06-04-2017 Still present in 2.1.0.11 on AquaFish/JollaC

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug.

• I've rebooted the phone
• I've removed the battery for about 30 minutes and rebooted the phone afterwards.
• I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

So Jolla, what else can i do to fix this? WILL JOLLA EVER FIX THIS BUG? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!

PLEASE SEND LOGS TO JOLLA(care@jolla.zendesk.com You can refer to issue #28354). See below how to create and send logs.

**Present since 2014**

UPDATE 06-04-2017 Still present in 2.1.0.11 on AquaFish/JollaC

UPDATE 03-03-2017 Still present in 2.1.0.9 on JollaC

UPDATE 22-08-2016 Problem still present, even with JollaC

UPDATE 01-12-2016 STILL HASN'T BEEN FIXED Send many logs but still no solution.

UPDATE 12-09-2017 SEEMS TO BE FIXED If affected people confirm I will close this question within the next month.

Since the update to 1.0.5.16 the following is happening when ending a call.

Me or the other side is ending the conversation by pressing end call or something like that. The connection is interrupted/closed as it should be, but the screen that says call ended stays on for a while. Normal behavior was, and should be, returning to the phone/call application so one can call another contact.

At this moment it even happened that after a call, I lock the phone immediately and when I received a call about 20 minutes later it was handled as a "call waiting" because the previous call still wasn't handled by the phone.

I've tried a couple of things myself off course, also because nobody else seems to mention having this bug.

• I've rebooted the phone
• I've removed the battery for about 30 minutes and rebooted the phone afterwards.
• I've set the phone back to factory defaults

Even when I've set the phone back to factory defaults it seems to appear, even when I didn't installed my backup back on the phone.

WILL JOLLA EVER FIX THIS BUG? At this moment I've switched back to my beloved N9 because the bug had made working with the Jolla for business not pleasant. The Jolla is unusable at this moment!