Revision history [back]

When making a call the volume of the receiver mic (as confirmed with the CSD tool) is very low, and the same low volume persists when using a headset (borrowed from an N9). This makes it uncomfortably difficult to make out whatever my interlocutor is saying even if I turn up the volume as far as the bar will go normally.

In order to get a decent volume I currently need to activate the loudspeaker, but I'd rather avoid doing this (it's not very polite in a busy environment).

I've tested the audio playback separately using the CSD tool and my results were:

1. Receiver has a low volume, with the play music to receiver test; even when volume is turned up all the way using the volume buttons.
2. The same low volume persists with the play music to headset test.

3. The loudspeaker has excellent volume.

   So how do I tell my Jolla to turn up the volume to the receiver/headset even further?

When making a call the volume of the receiver mic (as confirmed with the CSD tool) is very low, and the same low volume persists when using a headset (borrowed from an N9). This makes it uncomfortably difficult to make out whatever my interlocutor is saying even if I turn up the volume as far as the bar will go normally.

In order to get a decent volume I currently need to activate the loudspeaker, but I'd rather avoid doing this (it's not very polite in a busy environment).

I've tested the audio playback separately using the CSD tool and my results were:

1. Receiver has a low volume, with the play music to receiver test; even when volume is turned up all the way using the volume buttons.
2. The same low volume persists with the play music to headset test.

3. The loudspeaker has excellent volume.

   So how do I tell my Jolla to turn up the volume to the receiver/headset even further?

When making a call the volume of the receiver mic (as confirmed with the CSD tool) is very low, and the same low volume persists when using a headset (borrowed from an N9). low. This makes it uncomfortably difficult to make out whatever my interlocutor is saying even if I turn up the volume as far as the bar will go normally.

In order to get a decent volume I currently need to activate the loudspeaker, but I'd rather avoid doing this (it's not very polite in a busy environment).

I've tested the audio playback separately using the CSD tool and my results were:

1. Receiver has a low volume, with the play music to receiver test; even when volume is turned up all the way using the volume buttons.
2. The same low volume persists with the play music to headset test.

3. The loudspeaker has excellent volume.

   So how do I tell my Jolla to turn up the volume to the receiver/headset receiver even further?

When making a call the volume of the receiver (as confirmed with the CSD tool) is very low. This makes it uncomfortably difficult to make out whatever my interlocutor is saying even if I turn up the volume as far as the bar will go normally.

In order to get a decent volume I currently need to activate the loudspeaker, but I'd rather avoid doing this (it's not very polite in a busy environment).

I've tested the audio playback separately using the CSD tool and my results were:

1. Receiver has a low volume, with the play music to receiver test; even when volume is turned up all the way using the volume buttons.

2. The loudspeaker has excellent volume.

   So how do I tell my Jolla to turn up the volume to the receiver even further?

When making a call the volume of the receiver earpiece (as confirmed with the CSD tool) is very low. This makes it uncomfortably difficult to make out whatever my interlocutor is saying even if I turn up the volume as far as the bar will go normally.

In order to get a decent volume I currently need to activate the loudspeaker, but I'd rather avoid doing this (it's not very polite in a busy environment).

I've tested the audio playback separately using the CSD tool and my results were:

1. Receiver Earpiece has a low volume, with the play music to receiver test; even when volume is turned up all the way using the volume buttons.

2. The loudspeaker has excellent volume.

   So how do I tell my Jolla to turn up the volume to the receiver earpiece even further?

When making a call the volume of the earpiece receiver (as confirmed with the CSD tool) is very low. This makes it uncomfortably difficult to make out whatever my interlocutor is saying even if I turn up the volume as far as the bar will go normally.

In order to get a decent volume I currently need to activate the loudspeaker, but I'd rather avoid doing this (it's not very polite in a busy environment).

I've tested the audio playback separately using the CSD tool and my results were:

1. Earpiece Receiver has a low volume, with the play music to receiver test; even when volume is turned up all the way using the volume buttons.

2. The loudspeaker has excellent volume.

   So how do I tell my Jolla to turn up the volume to the earpiece receiver even further?

When making a call the volume of the receiver (as confirmed with ear piece (receiver speaker according to the CSD tool) is very low. This makes it uncomfortably difficult to make out whatever my interlocutor is saying even if I turn up the volume as far as the bar will go normally.

In order to get a decent volume I currently need to activate the loudspeaker, but I'd rather avoid doing this (it's not very polite in a busy environment).

I've tested the audio playback separately using the CSD tool and my results were:

1. Receiver has a low volume, with the play music to receiver test; even when volume is turned up all the way using the volume buttons.

2. The loudspeaker has excellent volume.

   So how do I tell my Jolla to turn up the volume to the receiver ear piece (receiver) even further?

When making a call the volume of the ear piece (receiver speaker according to the CSD tool) is very low. This makes it uncomfortably difficult to make out whatever my interlocutor is saying even if I turn up the volume as far as the bar will go normally.

In order to get a decent volume I currently need to activate the loudspeaker, but I'd rather avoid doing this (it's not very polite in a busy environment).

I've tested the audio playback separately using the CSD tool and my results were:

1. Receiver has a low volume, with the play music to receiver test; even when volume is turned up all the way using the volume buttons.

2. The loudspeaker has excellent volume.

   So how do I tell my Jolla to turn up the volume to the ear piece (receiver) even further?