We have moved to a new Sailfish OS Forum. Please start new discussions there.
Release date: 23.10.2014
Download size: ~300MB
Dear users,
We left for our summer break with the thought of migrating SailfishOS to Qt5.2 and bringing it to your devices during September. While we did manage to successfully upgrade to Qt5.2, it took quite long to stabilize the software stack. Now, after 13 internal release candidates, we believe that it is best to make this available to our developers and bleeding edge users instead of delaying it further.
Uitukka is an opt-in release, meaning you will not receive update notifications unless you willingly sign up to receive this OS update. Please read the following carefully before signing up, the instructions on how to sign up are available towards the end.
Therefore, if you are a developer or a user willing to forgive performance hiccups, we welcome you to sign up for this opt-in release by sending an email to update9-opt-in@jolla.com
. Make sure that the From-Address used is the one matching your Jolla account. The content of the email does not matter. After processing your email (which may take about 20 minutes), you should get an update notification and be able to install the release like any regular update.
This is a huge update given that this brings in Qt5.2. Ensure that you have enough disk space before attempting to upgrade. More information on the possible upgrade issues and workarounds is available in the known issues section below.
If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. Else, you risk breaking the device. Read important-steps-to-do-before-updating and how-to-disable-openrepos-repositories posts for more information.
If your Jolla is connected to internet, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do not reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You can awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
View detailed instructions at Zendesk.
/home/nemo/.cache/store-client/os-info
pkill store-client
)2 | No.2 Revision |
Release date: 23.10.2014
Download size: ~300MB
Dear users,
We left for our summer break with the thought of migrating SailfishOS to Qt5.2 and bringing it to your devices during September. While we did manage to successfully upgrade to Qt5.2, it took quite long to stabilize the software stack. Now, after 13 internal release candidates, we believe that it is best to make this available to our developers and bleeding edge users instead of delaying it further.
Uitukka is an opt-in release, meaning you will not receive update notifications unless you willingly sign up to receive this OS update. Please read the following carefully before signing up, the instructions on how to sign up are available towards the end.
Therefore, if you are a developer or a user willing to forgive performance hiccups, we welcome you to sign up for this opt-in release by sending an email to update9-opt-in@jolla.com
. Make sure that the From-Address used is the one matching your Jolla account. The content of the email does not matter. After processing your email (which may take about 20 minutes), you should get an update notification and be able to install the release like any regular update.
This is a huge update given that this brings in Qt5.2. Ensure that you have enough disk space before attempting to upgrade. More information on the possible upgrade issues and workarounds is available in the known issues section below.
If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. Else, you risk breaking the device. Read important-steps-to-do-before-updating and how-to-disable-openrepos-repositories posts for more information.
If your Jolla is connected to internet, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do not reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You can awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
View detailed instructions at Zendesk.
/home/nemo/.cache/store-client/os-info
pkill store-client
)3 | retagged |
Release date: 23.10.2014
Download size: ~300MB
Dear users,
We left for our summer break with the thought of migrating SailfishOS to Qt5.2 and bringing it to your devices during September. While we did manage to successfully upgrade to Qt5.2, it took quite long to stabilize the software stack. Now, after 13 internal release candidates, we believe that it is best to make this available to our developers and bleeding edge users instead of delaying it further.
Uitukka is an opt-in release, meaning you will not receive update notifications unless you willingly sign up to receive this OS update. Please read the following carefully before signing up, the instructions on how to sign up are available towards the end.
Therefore, if you are a developer or a user willing to forgive performance hiccups, we welcome you to sign up for this opt-in release by sending an email to update9-opt-in@jolla.com
. Make sure that the From-Address used is the one matching your Jolla account. The content of the email does not matter. After processing your email (which may take about 20 minutes), you should get an update notification and be able to install the release like any regular update.
This is a huge update given that this brings in Qt5.2. Ensure that you have enough disk space before attempting to upgrade. More information on the possible upgrade issues and workarounds is available in the known issues section below.
If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. Else, you risk breaking the device. Read important-steps-to-do-before-updating and how-to-disable-openrepos-repositories posts for more information.
If your Jolla is connected to internet, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do not reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You can awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
View detailed instructions at Zendesk.
/home/nemo/.cache/store-client/os-info
pkill store-client
)4 | No.4 Revision |
Release date: 23.10.2014
Download size: ~300MB
Dear users,
We left for our summer break with the thought of migrating SailfishOS to Qt5.2 and bringing it to your devices during September. While we did manage to successfully upgrade to Qt5.2, it took quite long to stabilize the software stack. Now, after 13 internal release candidates, we believe that it is best to make this available to our developers and bleeding edge users instead of delaying it further.
Uitukka is an opt-in release, meaning you will not receive update notifications unless you willingly sign up to receive this OS update. Please read the following carefully before signing up, the instructions on how to sign up are available towards the end.
Therefore, if you are a developer or a user willing to forgive performance hiccups, we welcome you to sign up for this opt-in release by sending an email to update9-opt-in@jolla.com
. Make sure that the From-Address used is the one matching your Jolla account. The content of the email does not matter. After processing your email (which may take about 20 minutes), you should get an update notification and be able to install the release like any regular update.
This is a huge update given that this brings in Qt5.2. Ensure that you have enough disk space before attempting to upgrade. More information on the possible upgrade issues and workarounds is available in the known issues section below.
If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. Else, you risk breaking the device. Read important-steps-to-do-before-updating and how-to-disable-openrepos-repositories posts for more information.
If your Jolla is connected to internet, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do not reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You can awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
View detailed instructions at Zendesk.
/home/nemo/.cache/store-client/os-info
pkill store-client
)5 | retagged |
Release date: 23.10.2014
Download size: ~300MB
Dear users,
We left for our summer break with the thought of migrating SailfishOS to Qt5.2 and bringing it to your devices during September. While we did manage to successfully upgrade to Qt5.2, it took quite long to stabilize the software stack. Now, after 13 internal release candidates, we believe that it is best to make this available to our developers and bleeding edge users instead of delaying it further.
Uitukka is an opt-in release, meaning you will not receive update notifications unless you willingly sign up to receive this OS update. Please read the following carefully before signing up, the instructions on how to sign up are available towards the end.
Therefore, if you are a developer or a user willing to forgive performance hiccups, we welcome you to sign up for this opt-in release by sending an email to update9-opt-in@jolla.com
. Make sure that the From-Address used is the one matching your Jolla account. The content of the email does not matter. After processing your email (which may take about 20 minutes), you should get an update notification and be able to install the release like any regular update.
This is a huge update given that this brings in Qt5.2. Ensure that you have enough disk space before attempting to upgrade. More information on the possible upgrade issues and workarounds is available in the known issues section below.
If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. Else, you risk breaking the device. Read important-steps-to-do-before-updating and how-to-disable-openrepos-repositories posts for more information.
If your Jolla is connected to internet, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do not reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You can awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
View detailed instructions at Zendesk.
/home/nemo/.cache/store-client/os-info
pkill store-client
)Release date: 23.10.2014
Download size: ~300MB
Dear users,
We left for our summer break with the thought of migrating SailfishOS to Qt5.2 and bringing it to your devices during September. While we did manage to successfully upgrade to Qt5.2, it took quite long to stabilize the software stack. Now, after 13 internal release candidates, we believe that it is best to make this available to our developers and bleeding edge users instead of delaying it further.
Uitukka is an opt-in release, meaning you will not receive update notifications unless you willingly sign up to receive this OS update. Please read the following carefully before signing up, the instructions on how to sign up are available towards the end.
Therefore, if you are a developer or a user willing to forgive performance hiccups, we welcome you to sign up for this opt-in release by sending an email to update9-opt-in@jolla.com
. Make sure that the From-Address used is the one matching your Jolla account. The content of the email does not matter. After processing your email (which may take about 20 minutes), you should get an update notification and be able to install the release like any regular update.
This is a huge update given that this brings in Qt5.2. Ensure that you have enough disk space before attempting to upgrade. More information on the possible upgrade issues and workarounds is available in the known issues section below.
If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. Else, you risk breaking the device. Read important-steps-to-do-before-updating and how-to-disable-openrepos-repositories posts for more information.
If your Jolla is connected to internet, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do not reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You can awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
View detailed instructions at Zendesk.
/home/nemo/.cache/store-client/os-info
pkill store-client
)7 | retagged |
Release date: 23.10.2014
Download size: ~300MB
Dear users,
We left for our summer break with the thought of migrating SailfishOS to Qt5.2 and bringing it to your devices during September. While we did manage to successfully upgrade to Qt5.2, it took quite long to stabilize the software stack. Now, after 13 internal release candidates, we believe that it is best to make this available to our developers and bleeding edge users instead of delaying it further.
Uitukka is an opt-in release, meaning you will not receive update notifications unless you willingly sign up to receive this OS update. Please read the following carefully before signing up, the instructions on how to sign up are available towards the end.
Therefore, if you are a developer or a user willing to forgive performance hiccups, we welcome you to sign up for this opt-in release by sending an email to update9-opt-in@jolla.com
. Make sure that the From-Address used is the one matching your Jolla account. The content of the email does not matter. After processing your email (which may take about 20 minutes), you should get an update notification and be able to install the release like any regular update.
This is a huge update given that this brings in Qt5.2. Ensure that you have enough disk space before attempting to upgrade. More information on the possible upgrade issues and workarounds is available in the known issues section below.
If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. Else, you risk breaking the device. Read important-steps-to-do-before-updating and how-to-disable-openrepos-repositories posts for more information.
If your Jolla is connected to internet, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do not reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You can awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
View detailed instructions at Zendesk.
/home/nemo/.cache/store-client/os-info
pkill store-client
)8 | retagged |
Release date: 23.10.2014
Download size: ~300MB
Dear users,
We left for our summer break with the thought of migrating SailfishOS to Qt5.2 and bringing it to your devices during September. While we did manage to successfully upgrade to Qt5.2, it took quite long to stabilize the software stack. Now, after 13 internal release candidates, we believe that it is best to make this available to our developers and bleeding edge users instead of delaying it further.
Uitukka is an opt-in release, meaning you will not receive update notifications unless you willingly sign up to receive this OS update. Please read the following carefully before signing up, the instructions on how to sign up are available towards the end.
Therefore, if you are a developer or a user willing to forgive performance hiccups, we welcome you to sign up for this opt-in release by sending an email to update9-opt-in@jolla.com
. Make sure that the From-Address used is the one matching your Jolla account. The content of the email does not matter. After processing your email (which may take about 20 minutes), you should get an update notification and be able to install the release like any regular update.
This is a huge update given that this brings in Qt5.2. Ensure that you have enough disk space before attempting to upgrade. More information on the possible upgrade issues and workarounds is available in the known issues section below.
If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. Else, you risk breaking the device. Read important-steps-to-do-before-updating and how-to-disable-openrepos-repositories posts for more information.
If your Jolla is connected to internet, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do not reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You can awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
View detailed instructions at Zendesk.
/home/nemo/.cache/store-client/os-info
pkill store-client
)9 | No.9 Revision |
Release date: 23.10.2014
Download size: ~300MB
Dear users,
We left for our summer break with the thought of migrating SailfishOS to Qt5.2 and bringing it to your devices during September. While we did manage to successfully upgrade to Qt5.2, it took quite long to stabilize the software stack. Now, after 13 internal release candidates, we believe that it is best to make this available to our developers and bleeding edge users instead of delaying it further.
Uitukka is an opt-in release, meaning you will not receive update notifications unless you willingly sign up to receive this OS update. Please read the following carefully before signing up, the instructions on how to sign up are available towards the end.
Therefore, if you are a developer or a user willing to forgive performance hiccups, we welcome you to sign up for this opt-in release by sending an email to update9-opt-in@jolla.com
. Make sure that the From-Address used is the one matching your Jolla account. The content of the email does not matter. After processing your email (which may take about 20 minutes), you should get an update notification and be able to install the release like any regular update.
This is a huge update given that this brings in Qt5.2. Ensure that you have enough disk space before attempting to upgrade. More information on the possible upgrade issues and workarounds is available in the known issues section below.
If you are unable to successfully configure the account, please visit account.jolla.com and try to reset your password.
If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. Else, you risk breaking the device. Read important-steps-to-do-before-updating and how-to-disable-openrepos-repositories posts for more information.
If your Jolla is connected to internet, an OS update notification should pop up shortly. If you just can't wait, you can manually trigger an OS update check as follows:
Do not reboot the device while the OS update installation is in progress. The process takes up to 10 minutes. During the update, the device screen might blank out. You can awaken the display by a short press on the power key to monitor the progress. When the upgrade has completed successfully, you will see the LED light up red before the device restarts.
In rare circumstances, you may have to try a second time to get through the update successfully.
View detailed instructions at Zendesk.
/home/nemo/.cache/store-client/os-info
pkill store-client
)