Revision history [back]
 | 1 | initial version | posted 2015-01-03 23:55:26 +0200 |
Power saving mode
If found in mcetool that the jolla phone has a Power saving mode anyone tried it?
my mcetool output:
[root@Jolla nemo]# mcetool
MCE status:
-----------
MCE version: 1.37.1.1
Radio states:
Master: enabled (Online)
Cellular: enabled
WLAN: enabled
Bluetooth: disabled
NFC: disabled
FM transmitter: disabled
Call state (type): none (normal)
Display state: off
Color profile: hardcoded
Brightness: 90 (1-100)
CABC mode: ui
Dim timeout: 15 (seconds)
Adaptive dimming: enabled
Adaptive dimming threshold: 10000 (milliseconds)
Display never blank: disabled
Blank timeout: 5 (seconds)
Blank inhibit: disabled
Keyboard backlight: disabled
Inactivity status: inactive
Power saving mode: disabled (inactive)
Forced power saving mode: disabled
PSM threshold: 20 (%)
Touchscreen/Keypad lock: locked
Touchscreen/Keypad autolock: enabled
Double-tap gesture policy: show-unlock-screen
Double-tap wakeup policy: proximity
Powerkey wakeup policy: always
Powerkey blanking mode: off
Powerkey long press delay: 1500 [ms]
Powerkey double press delay: 400 [ms]
Powerkey press from display on:
single blank,tklock
double blank,tklock,devlock
long shutdown
Powerkey press from display of:
single unblank
double unblank,tkunlock
long (none)
Powerkey D-Bus action 'dbus1': send signal with arg 'event1'
Powerkey D-Bus action 'dbus2': send signal with arg 'event2'
Powerkey ps override count: 3
Powerkey ps override timeout: 333 [ms]
Display off override mode: disabled
Use low power mode: enabled
LPM UI triggering: from-pocket
Use als mode: enabled
Use ps mode: enabled
Allowed dim timeouts [ 15 30 60 120 600 ]
Brightness fade [def]: 150 (milliseconds)
Brightness fade [dim]: 1000 (milliseconds)
Brightness fade [als]: 600 (milliseconds)
Brightness fade [blank]: 100 (milliseconds)
Brightness fade [unblank]: 90 (milliseconds)
Autosuspend policy: enabled
CPU Scaling Governor: automatic
Use fake doubletap: disabled
Tklock autoblank policy: enabled
Lipstick core delay: 30 (seconds)
Touch unblock delay: 100 (milliseconds)
Led breathing: enabled
Led breathing battery limit: 101 (%)
Memory use warning [used]: 160000 (ram pages)
Memory use warning [active]: disabled
Memory use critical [used]: 175000 (ram pages)
Memory use critical [active]: disabled
Memory use level: normal
| | 2 | No.2 Revision |
Power saving mode
If found in mcetool that the jolla phone has a Power saving mode anyone tried it?
my mcetool output:
[root@Jolla nemo]# mcetool
MCE status:
-----------
MCE version: 1.37.1.1
Radio states:
Master: enabled (Online)
Cellular: enabled
WLAN: enabled
Bluetooth: disabled
NFC: disabled
FM transmitter: disabled
Call state (type): none (normal)
Display state: off
Color profile: hardcoded
Brightness: 90 (1-100)
CABC mode: ui
Dim timeout: 15 (seconds)
Adaptive dimming: enabled
Adaptive dimming threshold: 10000 (milliseconds)
Display never blank: disabled
Blank timeout: 5 (seconds)
Blank inhibit: disabled
Keyboard backlight: disabled
Inactivity status: inactive
Power saving mode: disabled (inactive)
Forced power saving mode: disabled
PSM threshold: 20 (%)
Touchscreen/Keypad lock: locked
Touchscreen/Keypad autolock: enabled
Double-tap gesture policy: show-unlock-screen
Double-tap wakeup policy: proximity
Powerkey wakeup policy: always
Powerkey blanking mode: off
Powerkey long press delay: 1500 [ms]
Powerkey double press delay: 400 [ms]
Powerkey press from display on:
single blank,tklock
double blank,tklock,devlock
long shutdown
Powerkey press from display of:
single unblank
double unblank,tkunlock
long (none)
Powerkey D-Bus action 'dbus1': send signal with arg 'event1'
Powerkey D-Bus action 'dbus2': send signal with arg 'event2'
Powerkey ps override count: 3
Powerkey ps override timeout: 333 [ms]
Display off override mode: disabled
Use low power mode: enabled
LPM UI triggering: from-pocket
Use als mode: enabled
Use ps mode: enabled
Allowed dim timeouts [ 15 30 60 120 600 ]
Brightness fade [def]: 150 (milliseconds)
Brightness fade [dim]: 1000 (milliseconds)
Brightness fade [als]: 600 (milliseconds)
Brightness fade [blank]: 100 (milliseconds)
Brightness fade [unblank]: 90 (milliseconds)
Autosuspend policy: enabled
CPU Scaling Governor: automatic
Use fake doubletap: disabled
Tklock autoblank policy: enabled
Lipstick core delay: 30 (seconds)
Touch unblock delay: 100 (milliseconds)
Led breathing: enabled
Led breathing battery limit: 101 (%)
Memory use warning [used]: 160000 (ram pages)
Memory use warning [active]: disabled
Memory use critical [used]: 175000 (ram pages)
Memory use critical [active]: disabled
Memory use level: normal
I asked Jolla they said:
"I found in mcetool that there's a power save mode what does this do?"
This festure has not been released on Jolla yet.
| | 3 | No.3 Revision |
Power saving mode
If found in mcetool that the jolla phone has a Power saving mode anyone tried it?
my mcetool output:
[root@Jolla nemo]# mcetool
MCE status:
-----------
MCE version: 1.37.1.1
Radio states:
Master: enabled (Online)
Cellular: enabled
WLAN: enabled
Bluetooth: disabled
NFC: disabled
FM transmitter: disabled
Call state (type): none (normal)
Display state: off
Color profile: hardcoded
Brightness: 90 (1-100)
CABC mode: ui
Dim timeout: 15 (seconds)
Adaptive dimming: enabled
Adaptive dimming threshold: 10000 (milliseconds)
Display never blank: disabled
Blank timeout: 5 (seconds)
Blank inhibit: disabled
Keyboard backlight: disabled
Inactivity status: inactive
(cut some unimportant stuff out)
Power saving mode: disabled (inactive)
Forced power saving mode: disabled
PSM threshold: 20 (%)
Touchscreen/Keypad lock: locked
Touchscreen/Keypad autolock: enabled
Double-tap gesture policy: show-unlock-screen
Double-tap wakeup policy: proximity
Powerkey wakeup policy: always
Powerkey blanking mode: off
Powerkey long press delay: 1500 [ms]
Powerkey double press delay: 400 [ms]
Powerkey press from display on:
single blank,tklock
double blank,tklock,devlock
long shutdown
Powerkey press from display of:
single unblank
double unblank,tkunlock
long (none)
Powerkey D-Bus action 'dbus1': send signal with arg 'event1'
Powerkey D-Bus action 'dbus2': send signal with arg 'event2'
Powerkey ps override count: 3
Powerkey ps override timeout: 333 [ms]
Display off override mode: disabled
Use low power mode: enabled
LPM UI triggering: from-pocket
Use als mode: enabled
Use ps mode: enabled
Allowed dim timeouts [ 15 30 60 120 600 ]
Brightness fade [def]: 150 (milliseconds)
Brightness fade [dim]: 1000 (milliseconds)
Brightness fade [als]: 600 (milliseconds)
Brightness fade [blank]: 100 (milliseconds)
Brightness fade [unblank]: 90 (milliseconds)
Autosuspend policy: enabled
CPU Scaling Governor: automatic
Use fake doubletap: disabled
Tklock autoblank policy: enabled
Lipstick core delay: 30 (seconds)
Touch unblock delay: 100 (milliseconds)
Led breathing: enabled
Led breathing battery limit: 101 (%)
Memory use warning [used]: 160000 (ram pages)
Memory use warning [active]: disabled
Memory use critical [used]: 175000 (ram pages)
Memory use critical [active]: disabled
Memory use level: normal
I asked Jolla they said:
"I found in mcetool that there's a power save mode what does this do?"
This festure has not been released on Jolla yet.
Edit (19.11. by jollailija) Any news on this? Has anyone found out what this does? At least it gives a notification and changes battery symbol to a leaf (cool cool).