This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.28, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email)
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.28, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email)
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.28, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• usual, - If you use patchmanager, revert all applied patches before upgrading - If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• device. - Do not reboot the device while the update is in progress.
• progress. - The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email)
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.28, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual, - If you use patchmanager, revert all applied patches before upgrading - If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. - Do not reboot the device while the update is in progress. - The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email)
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: About 0.8% of the devices have statefs missing after the upgrade, which -- unless developer mode is already installed -- can only be fixed by factory reset. We're putting the rollout on hold until at least Monday to investigate.

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.28, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual, - usual,

• If you use patchmanager, revert all applied patches before upgrading - upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device. - device.
• Do not reboot the device while the update is in progress. - progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email)
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: About 0.8% of the devices After a thorough investigation we decided to continue pushing out the update to the remaining early access subscribers today. Please make sure to have statefs missing after the upgrade, which -- unless developer mode is already installed enabled before updating, and -- can only be fixed by factory reset. We're putting the rollout on hold until at least Monday to investigate.if possible -- update the device while connected to a charger.

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.28, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If you use patchmanager, revert all applied patches before upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email)
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: After We started rolling out a thorough investigation we decided to continue pushing out the update to the remaining new version fixing duplicate caldav calendars and events peek on a locked device to early access subscribers today. users. Please make sure to have developer mode enabled before updating, and -- if possible -- update the device while connected to a charger.

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.28, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If you use patchmanager, revert all applied patches before upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release
• 1.1.4.29 (28.4.2015): Fix 'peek to events possible on locked device' and 'duplicate caldav calendars'

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email)
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: We started rolling out a new version fixing duplicate caldav calendars and events peek on a locked device to early access users. Please make sure to have developer mode enabled before updating, and -- if possible -- update the device while connected to a charger.

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.281.1.4.29, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If you use patchmanager, revert all applied patches before upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release
• 1.1.4.29 (28.4.2015): Fix 'peek to events possible on locked device' and 'duplicate caldav calendars'

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email)
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: We started We'll start rolling out the update to everyone today. If possible, update with the device connected to a new version fixing duplicate caldav calendars and events peek on a locked device to early access users. Please make sure to charger. If you have developer mode enabled phonehook from OpenRepos installed uninstall it before updating, and -- if possible -- update the device while connected to a charger.upgrading.

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.29, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If you use phonehook from OpenRepos, uninstall it before upgrading
• If you use patchmanager, revert all applied patches before upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release
• 1.1.4.29 (28.4.2015): Fix 'peek to events possible on locked device' and 'duplicate caldav calendars'

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email)
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: We'll start rolling out the update to everyone today. If possible, update with the device connected to a charger. If you have phonehook from OpenRepos installed uninstall it before upgrading.

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.29, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If you use phonehook from OpenRepos, uninstall it before upgrading
• If you use patchmanager, revert all applied patches before upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release
• 1.1.4.29 (28.4.2015): Fix 'peek to events possible on locked device' and 'duplicate caldav calendars'

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email)). We are awaiting an approval of the new implementation from Facebook, until then you will unfortunately experience a broken Facebook account (including being unable to share status message and photos).
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: We'll start rolling out the update to everyone today. If possible, update with the device connected to a charger. If you have phonehook from OpenRepos installed uninstall it before upgrading.

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.29, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If you use phonehook from OpenRepos, uninstall it before upgrading
• If you use patchmanager, revert all applied patches before upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release
• 1.1.4.29 (28.4.2015): Fix 'peek to events possible on locked device' and 'duplicate caldav calendars'

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email). We are awaiting an approval of the new implementation from Facebook, until then you will unfortunately experience a broken Facebook account (including being unable to share status message and photos).
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• If you have phonehook from OpenRepos installed uninstall it before upgrading.
• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: We'll start rolling out the update to everyone today. If possible, update with the device connected to a charger. If you have phonehook from OpenRepos installed uninstall it before upgrading.

This is the early access release of upgrade 1.1.4 (u13, 1.1.3/u12 got dropped early in the RC phase), to be rolled out within the next 24 hours. The current version is 1.1.4.29, see upgrade version history below. During the next week we will collect feedback, amend this page and fix issues, if necessary, followed by releasing this upgrade to all users.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If you use phonehook from OpenRepos, uninstall it before upgrading
• If you use patchmanager, revert all applied patches before upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release
• 1.1.4.29 (28.4.2015): Fix 'peek to events possible on locked device' and 'duplicate caldav calendars'

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email). We are awaiting an approval of the new implementation from Facebook, until then you will unfortunately experience a broken Facebook account (including being unable to share status message and photos).
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• If you have phonehook from OpenRepos installed uninstall it before upgrading.
• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: We'll start rolling out the update to everyone today. If possible, update with the device connected to a charger. If you have phonehook from OpenRepos installed uninstall it before upgrading.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If you use phonehook from OpenRepos, uninstall it before upgrading
• If you use patchmanager, revert all applied patches before upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release
• 1.1.4.29 (28.4.2015): Fix 'peek to events possible on locked device' and 'duplicate caldav calendars'

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email). We are awaiting an approval of the new implementation from Facebook, until then you will unfortunately experience a broken Facebook account (including being unable to share status message and photos).
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• If you have phonehook from OpenRepos installed uninstall it before upgrading.
• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: We'll start rolling out the update to everyone today. If possible, update with the device connected to a charger. If you have phonehook from OpenRepos installed uninstall it before upgrading.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If you use phonehook from OpenRepos, uninstall it before upgrading
• If you use patchmanager, revert all applied patches before upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release
• 1.1.4.29 (28.4.2015): Fix 'peek to events possible on locked device' and 'duplicate caldav calendars'

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email). We are awaiting an approval of the new implementation from Facebook, until then you will unfortunately experience a broken Facebook account (including being unable to share status message and photos).
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• If you have phonehook from OpenRepos installed uninstall it before upgrading.
• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post

Update: We'll start rolling out the update to everyone today. If possible, update with the device connected to a charger. If you have phonehook from OpenRepos installed uninstall it before upgrading.

Please ensure that you have ~1.5GB of free disk space before attempting to upgrade your Jolla. If connected to the internet, and your account is subscribed for early access releases, your Jolla should receive an OS update notification shortly.

As usual,

• If you use phonehook from OpenRepos, uninstall it before upgrading
• If you use patchmanager, revert all applied patches before upgrading
• If your device is running software version lower than 1.0.4.20 and have WareHouse app installed (i.e you are using OpenRepos), disable all openrepo repositories before attempting to upgrade your device.
• Do not reboot the device while the update is in progress.
• The device screen may blank out during the update process, you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk

• Upgrade version history
• Highlights
  • Security fixes
  • Known issues
• OS update process
  • Other issues
  • Changelog

Upgrade version history

• 1.1.4.28 (15.4.2015): Initial early access release
• 1.1.4.29 (28.4.2015): Fix 'peek to events possible on locked device' and 'duplicate caldav calendars'

Highlights

• Split keyboard in landscape mode, with option to turn it off
• IMAP implementation now has support for idle/push
• Maps now supports landscape orientation
• Facebook API has been updated to 2.2, which unfortunately causes loss of features (chat or contacts sync, see the end of the roadmap email). We are awaiting an approval of the new implementation from Facebook, until then you will unfortunately experience a broken Facebook account (including being unable to share status message and photos).
• Better swipe feedback

Security fixes

CVE-2015-0245 CVE-2014-9402 CVE-2013-7423 CVE-2014-9402 CVE-2015-1472 CVE-2015-1473 CVE-2014-9092 CVE-2014-3571 CVE-2015-0206 CVE-2014-3569 CVE-2014-3572 CVE-2015-0204 CVE-2015-0205 CVE-2014-8275 CVE-2014-3570 CVE-2014-9636 CVE-2014-8139 CVE-2014-9636 CVE-2014-9622 CVE-2015-1349

Known issues

OS update process

• If you have phonehook from OpenRepos installed uninstall it before upgrading.
• Currently, checks on available disk space happens very late during the OS upgrade process and will fail in the installation phase if the disk space is low. Normally there should be an error note asking you to free some disk space and try again, but in some marginal cases it might not be shown. Should this happen, free some disk space and try to install the OS update again.
• OS update may fail due to some other reasons too, for example it may have installed some packages from the new release and still have something left from the old. If the device can boot up, you can try to recover by doing the following. If not, you can attempt to recover the device using the recovery mode.
  • Delete the file /home/nemo/.cache/store-client/os-info
  • Stop the store-client process (for e.g. pkill store-client)
  • Reopen Settings app, check for updates again and attempt to install the OS update again
• We have also noted that if the OS update is attempted while there is long queue of installation of apps from the Store, the system may end up in mixed state (for e.g. select all the apps from startup wizard, and start the system update already while the apps are being installed).
  • In such cases, the OS update appears to be stalled, however it is just waiting for the installations to complete before attempting to upgrade the OS. Just wait patiently, the worst thing to do here is to reboot the device!

Other issues

• calDAV and cardDAV services are in experimental stage. We have made some improvements with this update, however you may still face issues with certain service providers. Do report it in t.j.c. We'll take a look and try to sort it out.
• Deleting photo from Camera roll may also delete the previous photo. If camera reel's pulley menu has "Show details" greyed out - means the photo hasn't been indexed yet. Deleting photo in such state will result in previous photo deleted too. If you wait long enough (~10-15seconds) for 'Show details' to become active, only that photo will get deleted when you choose to.

Changelog

The full changelog is available in this separate post