Important question for a SD manufacturer: Is the Jolla 1 UHS-1 compatible?

BTW I'm using a sandisk ultra sdhc 32 GB card which is a UHS-I card as well. It works for 2,5 years now.

Sorry, but this really isn't what I'm looking for. I need facts, not guesses.

I have some devices which aren't UHS compatible (they can't produce the 1.8 V but only fixed 3.3, see: https://www.sdcard.org/press/past_evens/pdf/SD_Standards_and_Technology_GWTaipei_Oct2014.pdf ) but use UHS cards (some of them even in, with 3.3 v clearly not standard conform, SDR50 mode).

The Wikipedia link says UHS was classified in SD version 3.0 but SDXC is 3.01.

Last see:

SDXC cards will work in SDHC compatible readers (not SD readers) if the computer OS supports exFAT

(Source: http://kb.sandisk.com/app/answers/detail/a_id/2520/~/sd%2Fsdhc%2Fsdxc-specifications-and-compatibility ) So thanks for taking the time to sort out the links but you see: The picture is way bigger than "It supports the size of the card, so it also supports UHS"

//EDIT: And driving a UHS (1.8 v) card in a none-UHS host (3.3 v) is probably exactly what the guy from Transcend wants to know.

//EDIT²: BTW, I also asked the guy from Transcend why the card has a class 10 Label when it doesn't support a fallback from UHS-1 to class 10...

Yeah. I'd like to have facts as well (that's why I was keen to check the device and other mentionings to UHS-I compatibility. To get facts you have to ask Jolla support I'd say. They should be able to tell you the device used. But as I use a UHS-I card as well and others too, I'd say the Jolla does not cause the problem that your card manufacturer describes. As far as I understood the compatibility matrix for SD cards and readers that comment from SD card manufacturer is ridiciulous.

Thanks for the hint about customer support, I tried that but my ticket was instantly closed with

We will have limited availability from mid-June through July, 2016. We will be back to normal operation from 1.August.2016.
If your request is *not* urgent, we, therefore, kindly advise you to re-submit your request in August. Our apologies for any inconvenience this may cause.

But I need to RMA the card as fast as possible.

//EDIT: I feel stupid. The phone itself should have the information on board. @naytsyrhc (or any other nice person with a UHS card) could you give me the output of cat /sys/kernel/debug/mmc1/ios ? My defective card just gives garbage (0 Hz isn't a valid speed, also ~2,8 v isn't in the SD spec at all) :

[root@Sailfish nemo]# cat /sys/kernel/debug/mmc1/ios

clock:          0 Hz
vdd:            16 (2.8 ~ 2.9 V)
bus mode:       1 (open drain)
chip select:    0 (don't care)
power mode:     2 (on)
bus width:      2 (4 bits)
timing spec:    2 (sd high-speed)

I get exact the same reading while accessing SD card

clock:          0 Hz
vdd:            16 (2.8 ~ 2.9 V)
bus mode:       1 (open drain)
chip select:    0 (don't care)
power mode:     2 (on)
bus width:      2 (4 bits)
timing spec:    2 (sd high-speed)

Whithout accessing sd card the reading is

clock:          0 Hz
vdd:            0 (invalid)
bus mode:       1 (open drain)
chip select:    0 (don't care)
power mode:     0 (off)
bus width:      0 (1 bits)
timing spec:    0 (legacy)

But doesn't the "4 bits" imply that it is UHS-I mode?