[spare parts needed] Intex Aqua Fish
Hi community, does anybody have still spare parts available for Intex Aqua Fish?
I was caught today by a big rain storm and my phone was wet completely. So far it is wrking but both cameras are dead. I would like to substitute them hoping that not the mainboard has the issue.
Can anyone help out?
Thanks
Update: Cams are working but button connector has no real contact anymore. Does anybody have one?
I have a part salvaging AF, however the main camera is missing from it because I had to replace 2 times in mine. The soldering of the camera connector was crappy in my phone. If you could rule out that you really need motherboard just let me know.
martonmiklos ( 2020-06-28 10:21:04 +0200 )editSooo little update: the cams are working again, the contacts needed to be cleaned with alcohol thoroughly, now the only thing that is still an issue is the button connector, it seems like this cable is at the board connector broken.and unfortunately it is this kind of simple glued cable not a connector with a plug. Trying to solder it for better contact didn't work. I guess I have to splice each signal line and solder it separately but this most likely will break the cable since it is already too brittle.
PatsJolla ( 2020-06-28 15:50:36 +0200 )edit@martonmiklos do you still have the button connector with the cable to connect it to the mainboard? this would be the part that is now still not working.
PatsJolla ( 2020-06-28 15:52:37 +0200 )edit@PatsJolla: the whole phone is complete other than the main camera module. The image on the mainboard have not been JollaCified. If you would still use it I can send the whole phone to you.
martonmiklos ( 2020-06-29 19:12:05 +0200 )editThank you for the support..@BlaeX below offert me already his old one for spare parts, so I will try with his first. Therefore I want to wait for it now. I will give updates as soon as I have some news. redid the comment as I mixed usernames
PatsJolla ( 2020-06-29 21:31:29 +0200 )edit