Revision history [back]

Hi,

I have just bought an Intex Aqua Fish and I can't connect my wifi. I enabled developer mode and connected via USB and found this on dmesg when activating wifi and trying to scan networks:

[  +7.899025] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  +3.514294] wcd-spmi-core msm8x16_wcd_codec-f4bcaa00: Failed to get mbhc impedance -22
[  +1.202787] wcd_imped_config, invalid imped, greater than 48 Ohm
               = 48

when using iw I can see this:

[nemo@Sailfish ~]$ iw dev
phy#1
    Interface p2p0
        ifindex 24
        wdev 0x100000002
        addr 96:fd:2e:03:02:b6
        type managed
    Interface wlan0
        ifindex 23
        wdev 0x100000001
        addr 94:fd:2e:03:02:b6
        type managed

and finally

[nemo@Sailfish ~]$ devel-su iw dev wlan0 scan
Password: 
command failed: Invalid argument (-22)
[nemo@Sailfish ~]$ iw dev wlan0 link
Not connected.
[nemo@Sailfish ~]$ devel-su iw dev wlan0 connect <essid>
Password: 

I get this output:

[  +5.407423] [21:21:36.396757] [0000003C1BCDC151] [iw]  wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[  +0.151282] wlan: connection failed with 00:00:00:00:00:00 result:1 and Status:9
[  +0.000035] [21:21:36.548069] [0000003C1BFA15D5] [VosMC]  wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[  +0.000134] [21:21:36.548206] [0000003C1BFA200C] [VosMC]  wlan: [E :HDD] hdd_AssociationCompletionHandler: connect failed: for bssid 00:00:00:00:00:00 result:1 and Status:9

Can someone point me a solution to connect wifi? Don't really know why wifi does not work.... :(

Regards,

Hi,

I have just bought an Intex Aqua Fish and I can't connect my wifi. I enabled developer mode and connected via USB and found this on dmesg when activating wifi and trying to scan networks:

[  +7.899025] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  +3.514294] wcd-spmi-core msm8x16_wcd_codec-f4bcaa00: Failed to get mbhc impedance -22
[  +1.202787] wcd_imped_config, invalid imped, greater than 48 Ohm
               = 48

when using iw I can see this:

[nemo@Sailfish ~]$ iw dev
phy#1
    Interface p2p0
        ifindex 24
        wdev 0x100000002
        addr 96:fd:2e:03:02:b6
        type managed
    Interface wlan0
        ifindex 23
        wdev 0x100000001
        addr 94:fd:2e:03:02:b6
        type managed

and finally

[nemo@Sailfish ~]$ devel-su iw dev wlan0 scan
Password: 
command failed: Invalid argument (-22)
[nemo@Sailfish ~]$ iw dev wlan0 link
Not connected.
[nemo@Sailfish ~]$ devel-su iw dev wlan0 connect <essid>
Password: 

I get this output:

[  +5.407423] [21:21:36.396757] [0000003C1BCDC151] [iw]  wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[  +0.151282] wlan: connection failed with 00:00:00:00:00:00 result:1 and Status:9
[  +0.000035] [21:21:36.548069] [0000003C1BFA15D5] [VosMC]  wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[  +0.000134] [21:21:36.548206] [0000003C1BFA200C] [VosMC]  wlan: [E :HDD] hdd_AssociationCompletionHandler: connect failed: for bssid 00:00:00:00:00:00 result:1 and Status:9

Can someone point me a solution to connect wifi? Don't really know why wifi does not work.... :(

Regards,

Hi,

----------------- LAST UPDATE -----------------------------------

At home, even without SIM, phone does not connect by Wifi. Has changed channel in router to 6, 7 and 9 and none of those have been succesful. I have 4 other phones and computers connected without any problems.

I'm starting a procedure to return this phone to the seller as I think it's got a bug in Wifi. A hardware one, I presume.

In any case, if anyone thinks I need to test something else, don't hesitate to talk.

Regards,

------------------ UPDATE 30/09/2016 --------------------------

After lots of testings, I found the problem. When SIM is inserted, Wifi stops working and it's impossible to connect. As this should be known by other users, I consider it's a bug in the phone. Will try with another SIM (girlfriend) and if the same error arises, I'll return it.

if anyone knows a solution for that, please, don't hesitate to contact me ;)

I have just bought an Intex Aqua Fish and I can't connect my wifi. I enabled developer mode and connected via USB and found this on dmesg when activating wifi and trying to scan networks:

[  +7.899025] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  +3.514294] wcd-spmi-core msm8x16_wcd_codec-f4bcaa00: Failed to get mbhc impedance -22
[  +1.202787] wcd_imped_config, invalid imped, greater than 48 Ohm
               = 48

when using iw I can see this:

[nemo@Sailfish ~]$ iw dev
phy#1
    Interface p2p0
        ifindex 24
        wdev 0x100000002
        addr 96:fd:2e:03:02:b6
        type managed
    Interface wlan0
        ifindex 23
        wdev 0x100000001
        addr 94:fd:2e:03:02:b6
        type managed

and finally

[nemo@Sailfish ~]$ devel-su iw dev wlan0 scan
Password: 
command failed: Invalid argument (-22)
[nemo@Sailfish ~]$ iw dev wlan0 link
Not connected.
[nemo@Sailfish ~]$ devel-su iw dev wlan0 connect <essid>
Password: 

I get this output:

[  +5.407423] [21:21:36.396757] [0000003C1BCDC151] [iw]  wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[  +0.151282] wlan: connection failed with 00:00:00:00:00:00 result:1 and Status:9
[  +0.000035] [21:21:36.548069] [0000003C1BFA15D5] [VosMC]  wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[  +0.000134] [21:21:36.548206] [0000003C1BFA200C] [VosMC]  wlan: [E :HDD] hdd_AssociationCompletionHandler: connect failed: for bssid 00:00:00:00:00:00 result:1 and Status:9

Can someone point me a solution to connect wifi? Don't really know why wifi does not work.... :(

Regards,

Hi,

----------------- LAST UPDATE -----------------------------------

At home, even without SIM, phone does not connect by Wifi. Has changed channel in router to 6, 7 and 9 and none of those have been succesful. I have 4 other phones and computers connected without any problems.

I'm starting a procedure to return this phone to the seller as I think it's got a bug in Wifi. A hardware one, I presume.

In any case, if anyone thinks I need to test something else, don't hesitate to talk.

Regards,

------------------ UPDATE 30/09/2016 --------------------------

After lots of testings, I found the problem. When SIM is inserted, Wifi stops working and it's impossible to connect. As this should be known by other users, I consider it's a bug in the phone. Will try with another SIM (girlfriend) and if the same error arises, I'll return it.

if anyone knows a solution for that, please, don't hesitate to contact me ;)

I have just bought an Intex Aqua Fish and I can't connect my wifi. I enabled developer mode and connected via USB and found this on dmesg when activating wifi and trying to scan networks:

[  +7.899025] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  +3.514294] wcd-spmi-core msm8x16_wcd_codec-f4bcaa00: Failed to get mbhc impedance -22
[  +1.202787] wcd_imped_config, invalid imped, greater than 48 Ohm
               = 48

when using iw I can see this:

[nemo@Sailfish ~]$ iw dev
phy#1
    Interface p2p0
        ifindex 24
        wdev 0x100000002
        addr 96:fd:2e:03:02:b6
        type managed
    Interface wlan0
        ifindex 23
        wdev 0x100000001
        addr 94:fd:2e:03:02:b6
        type managed

and finally

[nemo@Sailfish ~]$ devel-su iw dev wlan0 scan
Password: 
command failed: Invalid argument (-22)
[nemo@Sailfish ~]$ iw dev wlan0 link
Not connected.
[nemo@Sailfish ~]$ devel-su iw dev wlan0 connect <essid>
Password: 

I get this output:

[  +5.407423] [21:21:36.396757] [0000003C1BCDC151] [iw]  wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[  +0.151282] wlan: connection failed with 00:00:00:00:00:00 result:1 and Status:9
[  +0.000035] [21:21:36.548069] [0000003C1BFA15D5] [VosMC]  wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[  +0.000134] [21:21:36.548206] [0000003C1BFA200C] [VosMC]  wlan: [E :HDD] hdd_AssociationCompletionHandler: connect failed: for bssid 00:00:00:00:00:00 result:1 and Status:9

Can someone point me a solution to connect wifi? Don't really know why wifi does not work.... :(

Regards,