Revision history [back]

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm ssu ur pkcon refresh pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su devel-su

   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm

   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 sailfish-content-graphics-intex-z1.25

   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm

   ssu ur ur

   pkcon refresh refresh

   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su

   devel-su
     
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpmhttps://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
     
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25sailfish-content-graphics-intex-z1.25
     
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpmfeature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
    ssu ur
    
   ssu urpkcon refresh
     
   pkcon refresh
    
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jollasplash-img-l500d-jolla
   

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su
   
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25
   
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   ssu ur
   
   pkcon refresh
   
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla
   

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su
   
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25
   
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   ssu ur
   
   pkcon refresh
   
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla
   

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su
   
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25
   
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   ssu ur
   
   pkcon refresh
   
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla
   

At your own risk! Not tested properly yet!

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su
   
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25
   sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex
   
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   ssu ur
   
   pkcon refresh
   
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla
   

At your own risk! Not tested properly yet!

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su
   
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex
   
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   ssu ur
   
   pkcon refresh
   
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla
   

In case of problem you should do following:

devel-su

curl -O https://coderus.openrepos.net/jolla/feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

pkcon remove sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla

pkcon install-local feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

ssu ur

pkcon refresh

pkcon install https://coderus.openrepos.net/jolla/feature-intex-0.1.7-10.8.10.jolla.noarch.rpm and do install/remove in reverse
sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex

At your own risk! Not tested properly yet!

This will make your device to be detected as Jolla C and reveice Early Access updates

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su
   
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex
   
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   ssu ur
   
   pkcon refresh
   
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla
   

In case of problem you should do following:

devel-su

curl -O https://coderus.openrepos.net/jolla/feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

pkcon remove sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla

pkcon install-local feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

ssu ur

pkcon refresh

pkcon install sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex

At your own risk! Not tested properly yet!

This will make your device to be detected as Jolla C and reveice These changes will do:

• Allow Early Access updatesupdates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su
   
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex
   
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   ssu ur
   
   pkcon refresh
   
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla
   

In case of problem you should do following:

devel-su

curl -O https://coderus.openrepos.net/jolla/feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

pkcon remove sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla

pkcon install-local feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

ssu ur

pkcon refresh

pkcon install sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex

At your own risk! Not tested properly yet!

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su
   
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   curl -O https://coderus.openrepos.net/jolla/sailfish-content-configuration-jolla-0.1.1-10.2.1.jolla.noarch.rpm
   
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex
   
   pkcon install-local sailfish-content-configuration-jolla-0.1.1-10.2.1.jolla.noarch.rpm
   
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   ssu ur
   
   pkcon refresh
   
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla
   

In case of problem you should do following:

devel-su

curl -O https://coderus.openrepos.net/jolla/feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

pkcon remove sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla

pkcon install-local feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

ssu ur

pkcon refresh

pkcon install sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex

At your own risk! Not tested properly yet!

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. You need Developer Mode on
2. You need to open your terminal or login to remote shell

3. Next commands you should execute in terminal

   devel-su
   
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   curl -O https://coderus.openrepos.net/jolla/sailfish-content-configuration-jolla-0.1.1-10.2.1.jolla.noarch.rpm
   
   curl -O https://coderus.openrepos.net/jolla/sailfish-content-graphics-jolla-0.0.8-10.3.1.jolla.noarch.rpm
   
   curl -O https://coderus.openrepos.net/jolla/sailfish-content-graphics-jolla-z1.25-0.0.8-10.3.1.jolla.noarch.rpm
   
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex
   
   pkcon install-local sailfish-content-configuration-jolla-0.1.1-10.2.1.jolla.noarch.rpm
   
   pkcon install-local sailfish-content-graphics-jolla-0.0.8-10.3.1.jolla.noarch.rpm sailfish-content-graphics-jolla-z1.25-0.0.8-10.3.1.jolla.noarch.rpm
   
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   ssu ur
   
   pkcon refresh
   
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla
   

In case of problem you should do following:

devel-su

curl -O https://coderus.openrepos.net/jolla/feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

pkcon remove sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla

pkcon install-local feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

ssu ur

pkcon refresh

pkcon install sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex

At your own risk! Not tested properly yet!risk!

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   curl -O https://coderus.openrepos.net/jolla/feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   curl -O https://coderus.openrepos.net/jolla/sailfish-content-configuration-jolla-0.1.1-10.2.1.jolla.noarch.rpm
   
   curl -O https://coderus.openrepos.net/jolla/sailfish-content-graphics-jolla-0.0.8-10.3.1.jolla.noarch.rpm
   
   curl -O https://coderus.openrepos.net/jolla/sailfish-content-graphics-jolla-z1.25-0.0.8-10.3.1.jolla.noarch.rpm
   
   pkcon remove feature-intex sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex
   
   pkcon install-local sailfish-content-configuration-jolla-0.1.1-10.2.1.jolla.noarch.rpm
   
   pkcon install-local sailfish-content-graphics-jolla-0.0.8-10.3.1.jolla.noarch.rpm sailfish-content-graphics-jolla-z1.25-0.0.8-10.3.1.jolla.noarch.rpm
   
   pkcon install-local feature-jolla-0.0.6-10.4.10.jolla.noarch.rpm
   
   ssu ur
   
   pkcon refresh
   
   pkcon install sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla
   https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh
   

5. Profit!

devel-su

curl -O https://coderus.openrepos.net/jolla/feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

pkcon remove sailfish-content-configuration-jolla sailfish-content-graphics-jolla-z1.25 jolla-settings-accounts-extensions-3rd-party-all sailfish-content-apps-default-configs splash-img-l500d-jolla

pkcon install-local feature-intex-0.1.7-10.8.10.jolla.noarch.rpm

ssu ur

pkcon refresh

pkcon install sailfish-content-configuration-intex sailfish-content-ambiences-intex sailfish-content-partnerspaces-intex sailfish-content-browser-intex sailfish-content-profiled-settings-intex all-translations-intex-pack sms-activation-intex sailfish-content-graphics-intex sailfish-content-partnerspaces-intex-tutorial sms-activation-intex-conf sailfish-content-ambiences-intex-default-ambience sailfish-content-tones-intex sailfish-content-gallery-configuration-intex sailfish-content-partnerspaces-intex-gaana sailfish-content-graphics-intex-z1.25 splash-img-l500d-intex

At your own risk!

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Profit!

At your own risk!

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Read prompt carefully, it will ask you to do actions 3 times.

6. Profit!

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Read prompt carefully, it will ask you to do actions 3 times.

6. Profit!

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Read prompt carefully, it will ask you to do actions 3 times.

6. Profit!

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Read prompt carefully, it will ask you to do actions 3 times.

6. Profit!

Part 2: replacing intex recovery with modified Jolla C recovery

After doing these commands your changes will survive factory reset.

1. Download https://coderus.openrepos.net/intexrecovery/mmcblk0p21_JollaC-2.0.2.43-l500d-in-0.0.1.24.tar.xz
2. Unpack and copy to sdcard
3. Boot in recovery mode, enter shell

4. Execute:

   mount /dev/mmcblk1p1 /mnt
   dd if=/mnt/mmcblk0p21.raw of=/dev/mmcblk0p21
   

5. Wait until image will be copied to partition, no output will be produced.

Operation is finished when the copying is complete

Credits to Kirill Chuvilin Chuvilin for modifying factory image.

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Read prompt carefully, it will ask you to do actions 3 times.

6. Profit!

Part 2: replacing intex recovery factory image with modified Jolla C recoveryfactory image

After doing these commands your changes will survive factory reset.

1. Download https://coderus.openrepos.net/intexrecovery/mmcblk0p21_JollaC-2.0.2.43-l500d-in-0.0.1.24.tar.xz
2. Unpack and copy to sdcard
3. Boot in recovery mode, enter shell

4. Execute:

   mount /dev/mmcblk1p1 /mnt
   dd if=/mnt/mmcblk0p21.raw of=/dev/mmcblk0p21
   

5. Wait until image will be copied to partition, no output will be produced.

Operation is finished when the copying is complete

Credits to Kirill Chuvilin for modifying factory image.

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Read prompt carefully, it will ask you to do actions at least 3 times.

6. Profit!

Part 2: replacing intex factory image with modified Jolla C factory image

After doing these commands your changes will survive factory reset.

1. Download https://coderus.openrepos.net/intexrecovery/mmcblk0p21_JollaC-2.0.2.43-l500d-in-0.0.1.24.tar.xz
2. Unpack and copy to sdcard
3. Boot in recovery mode, enter shell

4. Execute:

   mount /dev/mmcblk1p1 /mnt
   dd if=/mnt/mmcblk0p21.raw of=/dev/mmcblk0p21
   

5. Wait until image will be copied to partition, no output will be produced.

Operation is finished when the copying is complete

Credits to Kirill Chuvilin for modifying factory image.

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Read prompt carefully, it will ask you to do actions at least 3 times.

6. Profit!

Part 2: replacing intex factory image with modified Jolla C factory image

After doing these commands your changes will survive factory reset.

1. Download https://coderus.openrepos.net/intexrecovery/mmcblk0p21_JollaC-2.0.2.43-l500d-in-0.0.1.24.tar.xz
2. Unpack and copy to sdcard
3. Boot in recovery mode, enter shell

4. Execute:

   mount /dev/mmcblk1p1 /mnt
   dd if=/mnt/mmcblk0p21.raw of=/dev/mmcblk0p21
   

5. Wait until image will be copied to partition, no output will be produced.

produced. Operation is finished when the copying is complete

Credits to Kirill Chuvilin for modifying factory image.

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Read prompt carefully, it will ask you to do actions at least 3 times.

6. Profit!

Part 2: replacing intex factory image with modified Jolla C factory image

After doing these commands your changes will survive factory reset.

1. Download https://coderus.openrepos.net/intexrecovery/mmcblk0p21_JollaC-2.0.2.43-l500d-in-0.0.1.24.tar.xzThis Factory Image for Aqua Fish
2. Unpack and copy to sdcard
3. Boot in recovery mode, enter shell

4. Execute:

   mount /dev/mmcblk1p1 /mnt
   dd if=/mnt/mmcblk0p21.raw of=/dev/mmcblk0p21
   

5. Wait until image will be copied to partition, no output will be produced. Operation is finished when the copying is complete.

6. Back to recovery menu and perform factory reset.

Credits to Kirill Chuvilin for modifying factory image.

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Take note that this script won't work with newer Versions of SFOS (>2.2.1). The script works flawless with the 'factory reset' version of the Intex Aquafish (2.0.2.45 (Aurajoki)).

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Read prompt carefully, it will ask you to do actions at least 3 times.

6. Profit!

Part 2: replacing intex factory image with modified Jolla C factory image

After doing these commands your changes will survive factory reset.

1. Download This Factory Image for Aqua Fish
2. Unpack and copy to sdcard
3. Boot in recovery mode, enter shell

4. Execute:

   mount /dev/mmcblk1p1 /mnt
   dd if=/mnt/mmcblk0p21.raw of=/dev/mmcblk0p21
   

5. Wait until image will be copied to partition, no output will be produced. Operation is finished when the copying is complete.

6. Back to recovery menu and perform factory reset.

Credits to Kirill Chuvilin for modifying factory image.

These changes will do:

• Allow Early Access updates at same time with Jolla C
• Remove all intex stuff including activation SMS, Gaana, Aptoide

These changes will not do:

• Jolla C LTE bands (this is hardware limitations)
• Preinstalled android will remain

Changes persists after update, you will receive same updates as for Jolla C

Changes does not persists after factory reset, because phone factory backup still contains intex data

Take note that this script won't work with newer Versions of SFOS (>2.2.1). The script works flawless with the 'factory reset' version of the Intex Aquafish (2.0.2.45 (Aurajoki)).

Simple steps:

1. Open https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh to check what script will do
2. You need Developer Mode on
3. You need to open your terminal or login to remote shell

4. Next commands you should execute in terminal

   devel-su
   
   bash <(curl -s https://raw.githubusercontent.com/CODeRUS/aqua-fish-to-jolla-c/master/script.sh)
   

5. Read prompt carefully, it will ask you to do actions at least 3 times.

6. Profit!

Part 2: replacing intex factory image with modified Jolla C factory image

After doing these commands your changes will survive factory reset.

1. Download This Factory Image for Aqua Fish
2. Unpack and copy to sdcard
3. Boot in recovery mode, enter shell

4. Execute:

   mount /dev/mmcblk1p1 /mnt
   dd if=/mnt/mmcblk0p21.raw of=/dev/mmcblk0p21
   

5. Wait until image will be copied to partition, no output will be produced. Operation is finished when the copying is complete.

6. Back to recovery menu and perform factory reset.

Credits to Kirill Chuvilin for modifying factory image.