Revision history [back]

Hei,

Before the haters begin hating, I have already dug up the TJC for any similar issues. ;) With no real success of finding solutions/answers.

Last weekend I got myself an Xperia X (F5122, as F5121 was out of reach for me) and Sailfish X. I put some effort and working hours into it and now I have a great new phone. A worthy successor of my late JP1301.

I like it, but I noticed that the volume of the sounds on the Xperia X are too high for my taste. I even had to mute the system sounds for that reason. Today the (clock) alarm almost woke up the whole block I live in.

My question is: Is it only me experiencing this, or is it a known issue?

I know work-arounds. Well, some work-arounds. But is there an official solution there?

Kiitos,

LVPVS over.

Hei,

Before the haters begin hating, I have already dug up the TJC for any similar issues. ;) With no real success of finding solutions/answers.

Last weekend I got myself an Xperia X (F5122, as F5121 was out of reach for me) and Sailfish X. I put some effort and working hours into it and now I have a great new phone. A worthy successor of my late JP1301.

I like it, but I noticed that the volume of the sounds on the Xperia X are too high for my taste. I even had to mute the system sounds for that reason. Today the (clock) alarm almost woke up the whole block I live in.

My question is: Is it only me experiencing this, or is it a known issue?

I know work-arounds. Well, some work-arounds. But is there an official solution there?

EDIT

Thanks to everyone for the work-arounds. The clock alarm was only an example. The 'charger connected/disconnected tone' is another. Not to mention the 'unlock tone'...

Actually, I am more interested in the 'WHY' not in the 'HOW'. ;)

/EDIT

Kiitos,

LVPVS over.

Hei,

Before the haters begin hating, I have already dug up the TJC for any similar issues. ;) With no real success of finding solutions/answers.

Last weekend I got myself an Xperia X (F5122, as F5121 was out of reach for me) and Sailfish X. I put some effort and working hours into it and now I have a great new phone. A worthy successor of my late JP1301.

I like it, but I noticed that the volume of the sounds on the Xperia X are too high for my taste. I even had to mute the system sounds for that reason. Today the (clock) alarm almost woke up the whole block I live in.

My question is: Is it only me experiencing this, or is it a known issue?

I know work-arounds. Well, some work-arounds. But is there an official solution there?

EDIT

Thanks to everyone for the work-arounds. The clock alarm was only an example. The 'charger connected/disconnected tone' is another. Not to mention the 'unlock tone'...

Actually, I am more interested in the 'WHY' not in the 'HOW'. ;)

/EDIT

Another EDIT

After having the general sink volume reduced to some more bearable level, I noticed that the volume during calls (both via earphone, loudspeaker and BT carkit) is too low.

How, where can I tweak these levels independently so that they remain persistent over reboots?

/Another EDIT

Kiitos,

LVPVS over.

Hei,

EDIT May I ask somebody with anotner device (not SailfishX!) to check in CLI the ohtput of the followimg command and post a part of it here?

$ pactl list

I am interested in something like this:

Sample #7 Name: pulldown_lock Sample Specification: s16le 1ch 48000Hz Channel Map: mono Volume: (invalid) balance 0.00

Thank you in advance!

/EDIT

Before the haters begin hating, I have already dug up the TJC for any similar issues. ;) With no real success of finding solutions/answers.

Last weekend I got myself an Xperia X (F5122, as F5121 was out of reach for me) and Sailfish X. I put some effort and working hours into it and now I have a great new phone. A worthy successor of my late JP1301.

I like it, but I noticed that the volume of the sounds on the Xperia X are too high for my taste. I even had to mute the system sounds for that reason. Today the (clock) alarm almost woke up the whole block I live in.

My question is: Is it only me experiencing this, or is it a known issue?

I know work-arounds. Well, some work-arounds. But is there an official solution there?

EDIT

Thanks to everyone for the work-arounds. The clock alarm was only an example. The 'charger connected/disconnected tone' is another. Not to mention the 'unlock tone'...

Actually, I am more interested in the 'WHY' not in the 'HOW'. ;)

/EDIT

Another EDIT

After having the general sink volume reduced to some more bearable level, I noticed that the volume during calls (both via earphone, loudspeaker and BT carkit) is too low.

How, where can I tweak these levels independently so that they remain persistent over reboots?

/Another EDIT

Kiitos,

LVPVS over.

Hei,

EDIT

May I ask somebody with anotner device (not SailfishX!) to check in CLI the ohtput of the followimg command and post a part of it here?

$ pactl list

I am interested in something like this:

Sample #7 Name: pulldown_lock Sample Specification: s16le 1ch 48000Hz Channel Map: mono Volume: (invalid) balance 0.00

Thank you in advance!

/EDIT

Before the haters begin hating, I have already dug up the TJC for any similar issues. ;) With no real success of finding solutions/answers.

Last weekend I got myself an Xperia X (F5122, as F5121 was out of reach for me) and Sailfish X. I put some effort and working hours into it and now I have a great new phone. A worthy successor of my late JP1301.

I like it, but I noticed that the volume of the sounds on the Xperia X are too high for my taste. I even had to mute the system sounds for that reason. Today the (clock) alarm almost woke up the whole block I live in.

My question is: Is it only me experiencing this, or is it a known issue?

I know work-arounds. Well, some work-arounds. But is there an official solution there?

EDIT

Thanks to everyone for the work-arounds. The clock alarm was only an example. The 'charger connected/disconnected tone' is another. Not to mention the 'unlock tone'...

Actually, I am more interested in the 'WHY' not in the 'HOW'. ;)

/EDIT

Another EDIT

After having the general sink volume reduced to some more bearable level, I noticed that the volume during calls (both via earphone, loudspeaker and BT carkit) is too low.

How, where can I tweak these levels independently so that they remain persistent over reboots?

/Another EDIT

Kiitos,

LVPVS over.

Hei,

EDIT

May I ask somebody with anotner device (not SailfishX!) to check in CLI the ohtput of the followimg output of the following command and post a part of it here?

$ pactl list

I am interested in something like this:

Sample #7 Name: pulldown_lock Sample Specification: s16le 1ch 48000Hz Channel Map: mono Volume: (invalid) balance 0.00

Thank you in advance!

/EDIT

Before the haters begin hating, I have already dug up the TJC for any similar issues. ;) With no real success of finding solutions/answers.

Last weekend I got myself an Xperia X (F5122, as F5121 was out of reach for me) and Sailfish X. I put some effort and working hours into it and now I have a great new phone. A worthy successor of my late JP1301.

I like it, but I noticed that the volume of the sounds on the Xperia X are too high for my taste. I even had to mute the system sounds for that reason. Today the (clock) alarm almost woke up the whole block I live in.

My question is: Is it only me experiencing this, or is it a known issue?

I know work-arounds. Well, some work-arounds. But is there an official solution there?

EDIT

Thanks to everyone for the work-arounds. The clock alarm was only an example. The 'charger connected/disconnected tone' is another. Not to mention the 'unlock tone'...

Actually, I am more interested in the 'WHY' not in the 'HOW'. ;)

/EDIT

Another EDIT

After having the general sink volume reduced to some more bearable level, I noticed that the volume during calls (both via earphone, loudspeaker and BT carkit) is too low.

How, where can I tweak these levels independently so that they remain persistent over reboots?

/Another EDIT

Kiitos,

LVPVS over.

Hei,

EDIT

May I ask somebody with anotner device (not SailfishX!) to check in CLI the output of the following command and post a part of it here?

$ pactl list

I am interested in something like this:

Sample #7 #7

Name: pulldown_lock pulldown_lock

Sample Specification: s16le 1ch 48000Hz 48000Hz

Channel Map: mono mono

Volume: (invalid) (invalid)

balance 0.00

Thank you in advance!

/EDIT

Before the haters begin hating, I have already dug up the TJC for any similar issues. ;) With no real success of finding solutions/answers.

Last weekend I got myself an Xperia X (F5122, as F5121 was out of reach for me) and Sailfish X. I put some effort and working hours into it and now I have a great new phone. A worthy successor of my late JP1301.

I like it, but I noticed that the volume of the sounds on the Xperia X are too high for my taste. I even had to mute the system sounds for that reason. Today the (clock) alarm almost woke up the whole block I live in.

My question is: Is it only me experiencing this, or is it a known issue?

I know work-arounds. Well, some work-arounds. But is there an official solution there?

EDIT

Thanks to everyone for the work-arounds. The clock alarm was only an example. The 'charger connected/disconnected tone' is another. Not to mention the 'unlock tone'...

Actually, I am more interested in the 'WHY' not in the 'HOW'. ;)

/EDIT

Another EDIT

After having the general sink volume reduced to some more bearable level, I noticed that the volume during calls (both via earphone, loudspeaker and BT carkit) is too low.

How, where can I tweak these levels independently so that they remain persistent over reboots?

/Another EDIT

Kiitos,

LVPVS over.

Hei,

EDIT

May I ask somebody with anotner device (not SailfishX!) to check in CLI the output of the following command and post a part of it here?

$ pactl list

I am interested in something like this:

Sample #7

#7 Name: pulldown_lock

pulldown_lock Sample Specification: s16le 1ch 48000Hz

48000Hz Channel Map: mono

mono Volume: (invalid)

(invalid) balance 0.00

Thank you in advance!

/EDIT

Before the haters begin hating, I have already dug up the TJC for any similar issues. ;) With no real success of finding solutions/answers.

Last weekend I got myself an Xperia X (F5122, as F5121 was out of reach for me) and Sailfish X. I put some effort and working hours into it and now I have a great new phone. A worthy successor of my late JP1301.

I like it, but I noticed that the volume of the sounds on the Xperia X are too high for my taste. I even had to mute the system sounds for that reason. Today the (clock) alarm almost woke up the whole block I live in.

My question is: Is it only me experiencing this, or is it a known issue?

I know work-arounds. Well, some work-arounds. But is there an official solution there?

EDIT

Thanks to everyone for the work-arounds. The clock alarm was only an example. The 'charger connected/disconnected tone' is another. Not to mention the 'unlock tone'...

Actually, I am more interested in the 'WHY' not in the 'HOW'. ;)

/EDIT

Another EDIT

After having the general sink volume reduced to some more bearable level, I noticed that the volume during calls (both via earphone, loudspeaker and BT carkit) is too low.

How, where can I tweak these levels independently so that they remain persistent over reboots?

/Another EDIT

Kiitos,

LVPVS over.

Hei,

Newer EDIT

With EA 2.1.4.13 the

$ pactl --set-sink-volume sink.primary 80%

seems to be having no effect at all.

/Newer EDIT

EDIT

May I ask somebody with anotner device (not SailfishX!) to check in CLI the output of the following command and post a part of it here?

$ pactl list

I am interested in something like this:

Sample #7 Name: pulldown_lock Sample Specification: s16le 1ch 48000Hz Channel Map: mono Volume: (invalid) balance 0.00

Thank you in advance!

/EDIT

Before the haters begin hating, I have already dug up the TJC for any similar issues. ;) With no real success of finding solutions/answers.

Last weekend I got myself an Xperia X (F5122, as F5121 was out of reach for me) and Sailfish X. I put some effort and working hours into it and now I have a great new phone. A worthy successor of my late JP1301.

I like it, but I noticed that the volume of the sounds on the Xperia X are too high for my taste. I even had to mute the system sounds for that reason. Today the (clock) alarm almost woke up the whole block I live in.

My question is: Is it only me experiencing this, or is it a known issue?

I know work-arounds. Well, some work-arounds. But is there an official solution there?

EDIT

Thanks to everyone for the work-arounds. The clock alarm was only an example. The 'charger connected/disconnected tone' is another. Not to mention the 'unlock tone'...

Actually, I am more interested in the 'WHY' not in the 'HOW'. ;)

/EDIT

Another EDIT

After having the general sink volume reduced to some more bearable level, I noticed that the volume during calls (both via earphone, loudspeaker and BT carkit) is too low.

How, where can I tweak these levels independently so that they remain persistent over reboots?

/Another EDIT

Kiitos,

LVPVS over.

Hei,

Newer EDIT

With EA 2.1.4.13 the

$ pactl --set-sink-volume sink.primary 80%

seems to be having no effect at all.

$ pactl --set-sink-volume sink.deep_buffer 80%

Works instead.

I wonder if this was an intentional move or some mistake?

/Newer EDIT

EDIT

May I ask somebody with anotner device (not SailfishX!) to check in CLI the output of the following command and post a part of it here?

$ pactl list

I am interested in something like this:

Sample #7 Name: pulldown_lock Sample Specification: s16le 1ch 48000Hz Channel Map: mono Volume: (invalid) balance 0.00

Thank you in advance!

/EDIT

Before the haters begin hating, I have already dug up the TJC for any similar issues. ;) With no real success of finding solutions/answers.

Last weekend I got myself an Xperia X (F5122, as F5121 was out of reach for me) and Sailfish X. I put some effort and working hours into it and now I have a great new phone. A worthy successor of my late JP1301.

I like it, but I noticed that the volume of the sounds on the Xperia X are too high for my taste. I even had to mute the system sounds for that reason. Today the (clock) alarm almost woke up the whole block I live in.

My question is: Is it only me experiencing this, or is it a known issue?

I know work-arounds. Well, some work-arounds. But is there an official solution there?

EDIT

Thanks to everyone for the work-arounds. The clock alarm was only an example. The 'charger connected/disconnected tone' is another. Not to mention the 'unlock tone'...

Actually, I am more interested in the 'WHY' not in the 'HOW'. ;)

/EDIT

Another EDIT

After having the general sink volume reduced to some more bearable level, I noticed that the volume during calls (both via earphone, loudspeaker and BT carkit) is too low.

How, where can I tweak these levels independently so that they remain persistent over reboots?

/Another EDIT

Kiitos,

LVPVS over.