Why telnet doesn't work?

asked 2016-01-05 02:53:01 +0200

Noé gravatar image

I have read posts about this trouble, but nothing works. I turn off my phone and after that I cannot turn up it. The screen only shows the Jolla logo then change to black screen. I've tried Jolla Recovery tool. I'm using Mac and I installed the HoRNDIS driver. After that I try to connect to my phone via telnet but 10.42.66.66 and 192.168.2.15 don't work.

Message error is:

Trying 10.42.66.66...

-telnet: connect to address 10.42.66.66: Operation timed out

-telnet: Unable to connect to remote host

Any suggestion?

Thank you very much.

edit retag flag offensive close delete

Comments

1

@Noe - Hi,

Take out the battery, hold the volume button down and keep it held down. Insert battery, wait until you see the Jolla logo and the device vibrates once, then let go of the volume down button. Your phone should now be in recovery mode - now you should be able to TELNET successfully.

Make sure your battery also has reasonable charge..

If you haven't already looked at Jolla's Zendesk help page regarding recovery, here's the link; https://jolla.zendesk.com/hc/en-us/articles/204709607-Jolla-Phone-How-do-I-use-the-Recovery-Mode-

Spam Hunter ( 2016-01-05 03:11:25 +0200 )edit

Hi @Markkyboy. Thanks for your answer. I did as you say, I follow that steps but telnet don't work.

Noé ( 2016-01-05 03:25:17 +0200 )edit

Okay, when you see the Jolla logo is there smaller text top left of the screen say fastboot mode or just black screen with Jolla logo ?

Spam Hunter ( 2016-01-05 03:30:58 +0200 )edit

Only black screen with Jolla logo

Noé ( 2016-01-05 03:31:47 +0200 )edit

Okay, what are you using to TELNET to the device?, putty or telnet itself ?

Spam Hunter ( 2016-01-05 03:32:37 +0200 )edit