asked 2019-03-19 19:40:46 +0200
Hi,
I am trying to boot Xperia XA2 Plus into recovery mode using this guide https://jolla.zendesk.com/hc/en-us/articles/360002996893-Xperia-X-devices-How-to-use-the-Recovery-Mode. Unfortunately every time i do "fastboot boot hybris-recovery.img" nothing happens. Everything I see in the console is "Sending boot.img" forever. Fastboot is at the newest version.
Can somebody help me ?
answered 2019-03-20 11:17:14 +0200
It seems that the Xperia as some problems with a USB3 port, try to it to a USB2 port on the computer.
answered 2019-03-20 14:15:10 +0200
It looks like this "Input/output error /dev/mmcblk0rpmb" has nothing to do with resize2fs segmentation fault. But I am stuck now.
OK, so everything is clear now for me with recovery mode :
One more question guys - how did you manage to flash hybris-recovery.img ? When I try to do it (fastboot flash recovery hybris-recovery.img) I get "no such partition".
answered 2019-03-19 19:52:07 +0200
You can read in the guide at zendesk as second note:
NOTE: We do not have the instructions for Xperia XA2 yet.
You need a computer. Connect the phone in fastboot mode and boot the hybris recovery image via fastboot.
I wasn't able to flash the recovery image for good to my phone though.
Kopekenscheich ( 2019-03-19 20:46:27 +0200 )editanswered 2019-03-20 05:57:43 +0200
it should be same i just finish flash in recovery mode in my xa2 plua
answered 2019-03-20 12:13:44 +0200
Thanks Manu007 - I already figured that out. Indeed on a laptop with USB2 everything went well and I could boot to recovery. I was going to resize my system partition but I encountered following problem after entering shell:
Type the number of the desired action and press [Enter]: 3
If you continue, this may void your warranty. Are you really SURE? [y/N] y /dev/mmcblk0rpmb: read failed after 0 of 4096 at 0: Input/output error /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4128768: Input/output error /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4186112: Input/output error /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4096: Input/output error 2 logical volume(s) in volume group "sailfish" now active
When I tried to resize the filesystem resize2fs segfaulted on me:
resize2fs /dev/sailfish/home 10G resize2fs 1.43.1 (08-Jun-2016) Resizing the filesystem on /dev/sailfish/home to 2621440 (4k) blocks. Segmentation fault
Any ideas ?
Asked: 2019-03-19 19:40:46 +0200
Seen: 712 times
Last updated: Mar 20 '19
