Dialer doesn't start on Intex Aqua Fish after update to 3.0.2.8

Question

4

Dialer doesn't start on Intex Aqua Fish after update to 3.0.2.8

asked 2019-03-20 11:56:36 +0300

jsommer
3324 ●97 ●142 ●154

updated 2019-03-21 05:37:40 +0300

I could update my device, but the dialer seems to crash: If I start the dialer, the home screen shows the cover page with a spinner for a short time bevore it disappears.

Any solutions?

I could reproducte the problem after factory reset. I updated my Intex Aqua Fish to the latest release, that Intex did provice. Then I updated step by steop to the stop releases:

devel-su
ssu release 2.2.0.29
version --dup
reboot

devel-su
ssu release 3.0.0.8
version --dup
reboot

Next upadates are not possible with this approach. Unfortunately, this is a well known behaviour. So I had to use the folliwing commands:

devel-su
ssu release 3.0.1.11
pkcon refresh
pkcon -v update
reboot

devel-su
ssu release 3.0.2.8
pkcon refresh
pkcon -v update
reboot

With a direct update from the stop release 3.0.0.8 to 3.0.2.8 I get a white screen after reboot. So I did execute the intermediate step after another factory reset.

edit retag flag offensive close delete

Comments

1

What does voicecall-ui print if you run it in terminal?

Mohjive ( 2019-03-20 14:00:30 +0300 )edit

1

Is there even an official update for Aquafish ? Or did you just “force” with terminal commands ?

Nieldk ( 2019-03-20 16:25:08 +0300 )edit

1

Thanks for your comments. I have now made a factory reset.

Intex stopped the official support with release 2.1.4.14. Thus I have to force each further update. My Intex phone did work perfectly with 3.0.1.11. I think, because it is the same hardware as Jolla C.

jsommer ( 2019-03-20 16:28:18 +0300 )edit

@Mihjive This is the log:

[W] unknown:0 - Could not open /sys/fs/cgroup/memory/noswapping/tasks for disabling caching
[W] unknown:0 - Could not open /sys/fs/cgroup/cpu,cpuacct/interactive/tasks for disabling caching
[D] unknown:0 - Using Wayland-EGL
[W] unknown:337 - file:///usr/share/voicecall-ui-jolla/main.qml:337:5: Type VoiceCallManager unavailable 
         VoiceCallManager { 
         ^
[W] unknown:33 - file:///usr/share/voicecall-ui-jolla/VoiceCallManager.qml:33:45: Invalid alias target location: isDebugEnabled 
         readonly property alias enableDebugLog: telephony.isDebugEnabled 
                                                 ^
[D] unknown:0 - (dial) GetAll() failed: "org.freedesktop.DBus.Error.UnknownObject" "Method \"GetAll\" with signature \"\" on interface \"org.sailfishos.ofono.mdm.VoiceCallFilter\" doesn't exist\n"
[D] unknown:0 - (incoming) GetAll() failed: "org.freedesktop.DBus.Error.UnknownObject" "Method \"GetAll\" with signature \"\" on interface \"org.sailfishos.ofono.mdm.VoiceCallFilter\" doesn't exist\n"

I think, the 3.0.2.8 release is buggy. I have to trigger another factory reset and wait for the next release.

jsommer ( 2019-03-21 05:13:38 +0300 )edit

same here. Exaxt the same log as from @jsommer.

I found that dialing a number from the phonebook also does not work anymore

Bart S ( 2019-03-24 13:52:41 +0300 )edit

What does voicecall-ui print if you run it in terminal?
Mohjive ( 2019-03-20 14:00:30 +0300 )edit
Is there even an official update for Aquafish ? Or did you just “force” with terminal commands ?
Nieldk ( 2019-03-20 16:25:08 +0300 )edit
Thanks for your comments. I have now made a factory reset.
Intex stopped the official support with release 2.1.4.14. Thus I have to force each further update. My Intex phone did work perfectly with 3.0.1.11. I think, because it is the same hardware as Jolla C.
jsommer ( 2019-03-20 16:28:18 +0300 )edit
@Mihjive This is the log:
[W] unknown:0 - Could not open /sys/fs/cgroup/memory/noswapping/tasks for disabling caching [W] unknown:0 - Could not open /sys/fs/cgroup/cpu,cpuacct/interactive/tasks for disabling caching [D] unknown:0 - Using Wayland-EGL [W] unknown:337 - file:///usr/share/voicecall-ui-jolla/main.qml:337:5: Type VoiceCallManager unavailable VoiceCallManager { ^ [W] unknown:33 - file:///usr/share/voicecall-ui-jolla/VoiceCallManager.qml:33:45: Invalid alias target location: isDebugEnabled readonly property alias enableDebugLog: telephony.isDebugEnabled ^ [D] unknown:0 - (dial) GetAll() failed: "org.freedesktop.DBus.Error.UnknownObject" "Method \"GetAll\" with signature \"\" on interface \"org.sailfishos.ofono.mdm.VoiceCallFilter\" doesn't exist\n" [D] unknown:0 - (incoming) GetAll() failed: "org.freedesktop.DBus.Error.UnknownObject" "Method \"GetAll\" with signature \"\" on interface \"org.sailfishos.ofono.mdm.VoiceCallFilter\" doesn't exist\n"
I think, the 3.0.2.8 release is buggy. I have to trigger another factory reset and wait for the next release.
jsommer ( 2019-03-21 05:13:38 +0300 )edit
same here. Exaxt the same log as from @jsommer.
I found that dialing a number from the phonebook also does not work anymore
Bart S ( 2019-03-24 13:52:41 +0300 )edit

Answer 1

1

answered 2019-03-20 20:47:21 +0300

LVPVS

3306 ●58 ●87 ●78

The same happened to me on XperiaX. Here is what solved it for me:

pkcon install sailfish-devicelock-fpd

No need to reset.

LVPVS out.

edit flag offensive delete publish link

Comments

Unfortunately this doesn't work:

pkcon install sailfish-devicelock-fpd
Resolving                                                                                                          
Testing changes                                                                                                   
Finished                                                                                                          
Fatal error: nothing provides sailfish-fpd-slave needed by sailfish-fpd-1.3.2-1.6.3.jolla.armv7hl

jsommer ( 2019-03-21 05:10:58 +0300 )edit

Do a pkcon refresh beforehand.

Alex ( 2019-03-21 08:40:04 +0300 )edit

1

Sure, I have done that. Unfortunately with no impact.

jsommer ( 2019-03-21 09:08:28 +0300 )edit

It helps for my Intex Aquafish. thanks a lot! Here is my:

#zypper ref
Repository 'adaptation0' is up to date.                                                                                                               
Repository 'adaptation1' is up to date.                                                                                                               
Repository 'aliendalvik' is up to date.                                                                                                               
Repository 'apps' is up to date.                                                                                                                      
Repository 'customer-intex' is up to date.                                                                                                            
Repository 'customer-jolla' is up to date.                                                                                                            
Retrieving repository 'home_javispedro_xwayland' metadata .....................................................................................[error]
Repository 'home_javispedro_xwayland' is invalid.
[home_javispedro_xwayland|plugin:/ssu?repo=home_javispedro_xwayland] Valid metadata not found at specified URL
Please check if the URIs defined for this repository are pointing to a valid repository.
Skipping repository 'home_javispedro_xwayland' because of the above error.
Repository 'hotfixes' is up to date.                                                                                                                  
Repository 'jolla' is up to date.                                                                                                                     
Repository 'sailfish-eas' is up to date.                                                                                                              
Repository 'store' is up to date.                                                                                                                     
Repository 'xt9' is up to date.

brinZ ( 2019-03-22 04:48:56 +0300 )edit

then:

[root@Sailfish nemo]# zypper in sailfish-devicelock-fpd
Error building the cache:
[home_javispedro_xwayland|plugin:/ssu?repo=home_javispedro_xwayland] Valid metadata not found at specified URL
Warning: Skipping repository 'home_javispedro_xwayland' because of the above error.
Some of the repositories have not been refreshed because of an error.
Loading repository data...
Reading installed packages...
Resolving package dependencies...

Problem: nothing provides sailfish-fpd-slave needed by sailfish-fpd-1.3.2-1.6.3.jolla.armv7hl
 Solution 1: do not install sailfish-devicelock-fpd-1.0.4-1.4.6.jolla.armv7hl
 Solution 2: break sailfish-fpd-1.3.2-1.6.3.jolla.armv7hl by ignoring some of its dependencies

Choose from above solutions by number or cancel [1/2/c] (c): 2
Resolving dependencies...
Resolving package dependencies...



Problem: sailfish-devicelock-fpd-1.0.4-1.4.6.jolla.armv7hl conflicts with jolla-devicelock-daemon-encsfa provided by jolla-devicelock-daemon-encsfa-0.2.18-1.4.10.jolla.armv7hl
 Solution 1: Following actions will be done:
  deinstallation of jolla-devicelock-daemon-encsfa-0.2.18-1.4.10.jolla.armv7hl
  deinstallation of jolla-devicelock-plugin-encsfa-0.2.18-1.4.10.jolla.armv7hl
 Solution 2: do not install sailfish-devicelock-fpd-1.0.4-1.4.6.jolla.armv7hl

Choose from above solutions by number or cancel [1/2/c] (c): 1
Resolving dependencies...
Resolving package dependencies...
1

The following 2 NEW packages are going to be installed:
  sailfish-devicelock-fpd sailfish-fpd

The following 2 packages are going to be REMOVED:
  jolla-devicelock-daemon-encsfa jolla-devicelock-plugin-encsfa

The following 7 packages are going to be upgraded:
  lipstick-jolla-home-qt5 lipstick-jolla-home-qt5-components lipstick-qt5 lipstick-qt5-tools nemo-qml-plugin-devicelock voicecall-qt5
  voicecall-qt5-plugin-telepathy

7 packages to upgrade, 2 new, 2 to remove.
Overall download size: 2.9 MiB. Already cached: 0 B. After the operation, 47.8 KiB will be freed.
Continue? [y/n/...? shows all options] (y): y

brinZ ( 2019-03-22 04:49:51 +0300 )edit

So dialer is working NOW; but still no sound in MEDIA apps, not working native camera, and NO "X"-pic over icons while long press apps icons to remove.

Hard reset so painful - `cause a lot of Android apps and openrepos apps need to reinstall.

brinZ ( 2019-03-22 04:53:07 +0300 )edit

Indeed. It took a lot of time to re-install everything on my productive phone. Therefore I will first check the update with another Intex Aqua Fish developer device as soon the next update is available. 3.0.2.8 is an early adapter release. Hopefully the issues will be fixed in the 3.0.2.x release.

I was too enthusiastic and careless, when I saw the new release note.

jsommer ( 2019-03-22 10:12:04 +0300 )edit

@brinZ is the first log complete ? it starts with #sypper ref what command was given to get the output ? I tried the device lock and also get the Fatal Error as shown in the post.

Bart S ( 2019-03-24 13:55:16 +0300 )edit

Dialer doesn't start on Intex Aqua Fish after update to 3.0.2.8

Comments

1 Answer

Comments

Question tools

Stats

Related questions

Dialer doesn't start on Intex Aqua Fish after update to 3.0.2.8

Comments

1 Answer

Comments

Question tools

Public thread

Stats

Related questions