csd tool bluetooth test no success why?

asked 2019-09-30 10:03:21 +0200

cemoi71 gravatar image

updated 2019-09-30 10:04:31 +0200

Hello Sailors,

with my XA2+ device on sfos 3.1.0.11 i tried to test the Bluetooth interface with the CSD-Tool.
I start the test, saw that my it opens the interface, start the search, find my already known headset.
Connect itself to it, but value it as failed. Why?

How should the test work normally ? please.

Cheers

edit retag flag offensive close delete

Comments

I just restart the test and get either 'bluetooth not available' or 'turning bluetooth on' and timeout with pass failed. But then I just restart the test and everything green.

Maybe disable bluetooth beforehand?

peterleinchen ( 2019-09-30 22:00:15 +0200 )edit

bluetooth deactivated before but still same issue. Under the BL devices list i see it has detect it, my headset tells that is detected too. but test is failed.
Which device do you have?

cemoi71 ( 2019-09-30 22:08:16 +0200 )edit

XA2

just retried once more and asked my JollaC to connect to XA2 and I did see the connection and success!

peterleinchen ( 2019-09-30 22:18:21 +0200 )edit

ok... i hope that i'm not an isolated case one...

cemoi71 ( 2019-09-30 22:28:07 +0200 )edit

really strange. i tried to do the test with my laptop.
First i cut the BL off.
Then do the test.
It found the pc and the found it, and was able to bind both.
Then i tried to repeat the test but it never work, it tells that BL is not available.
What else is strange, is that the BL toggle element in status bar tells all the time that it is bound to my headset, even if i toggle it to off or on.

cemoi71 ( 2019-09-30 22:38:38 +0200 )edit