asked 2020-01-11 09:57:40 +0200
Edit:
I always get this notifocation..
Hi guys,
I'm here in the Philippines and I noticed that USSD codes are not working. I can't load nor check my balance nor any other option. I never had to use it before in Germany but I know it worked with an oder OS version. The one from June 2019 :) Is it a problem with the OS or the provider here? I have a XA2 Plus dual sim running 3.2.1.20
has anyone a solution?
answered 2020-01-11 10:12:06 +0200
USSD requests work well here (on JP1301 with SFOS 3.2.1.20). I can only guess that you are still using your German SIM and USSD requests are not proxied. If you use a SIM from a local M(V)NO, this would be a different case.
i concur with the original poster ever since 3.2 i cannot properly use the ussd codes, it only returns a response the first time but after that it states the operation is busy and i get stuck, i plan to downgrade if this isnt fixed
ubuntuscofield ( 2020-01-12 14:08:45 +0200 )editanswered 2020-02-02 13:30:15 +0200
Error occurs on german o2 with *100#
answered 2020-02-04 10:25:54 +0200
Here is a workaround, once you get to that response you wait until it changes to problem with service request then you can input and get the desired response.
answered 2020-05-02 19:01:04 +0200
Another workaround is to send the complete sequence of codes from the start.
For example, for me *110# is the relevant initiation sequence, then i would like to choose 4 and then 1 to check validity. Complete sequence to be called at once would be *110*4*1#.
By chance, I had such a complete sequence saved in the address book since using a Nokia N9. ;-]
answered 2020-01-13 14:11:32 +0200
Just checked the *#06# USSD request (IMEI) on my Xperia XA2 non-+ dual SIM with Deutsche Telekom and on my Xperia 10 non-+ dual SIM with Vodaphone.
Both requests were fine.
Could it be a problem of the provider in the Philippines?
EDIT:
I tried further codes and some caused a reboot of the Xperia 10 So it might well be a problem of SFOS
The issue isnt with one time response ussd codes, like requesting for balance or checking imei but rather if one request services that require several responses in the ussd window. It seems after running the ussd code, the pop up that returns is okay but if you try entering feedback or responding to it, lets say choose 1 for this or 2 for this it doesn't work, from my tinkering i have to wait until an argument is not recognized feedback then i can continue without hiccups.
ubuntuscofield ( 2020-01-13 14:19:30 +0200 )editI don't think it's a prob with the provider. as I stated it worked before.
it's like ubuntuscofield stated. I can open the menu by*142# after I can type for example a 2 for my account and after I get the screenshot I sent. plus the phone falls down from 4G to 3G for some mins
Dreej ( 2020-01-13 15:52:54 +0200 )editAsked: 2020-01-11 09:57:40 +0200
Seen: 1,308 times
Last updated: Jun 01 '20
I have same issue, here in Malaysia.
bane07 ( 2020-02-03 20:42:09 +0200 )edit