[Jolla Tablet] Loose micro-usb connector? charging problems [answered]

asked 2016-11-02 17:17:52 +0300

DarkWhite
853 ●23 ●38 ●42

updated 2016-11-02 17:24:38 +0300

Hi all, I suspect my Jolla Tablet's USB-connector is loosening, which produces charging problems. Do I have the right conclusion? Strangely enough device detects 5V input and is shown in AIDA64 application. My Jolla Tablet symptoms are:

-instead of charging AIDA64 indicates battery is continuos drainging about -1000mA and this is observed as system battery % value dropping

-device gets input voltage and no "changing failed, try another charger"-message is shown

-if usb cable is alinged perfectly AIDA64 shows positive charging value around 400mA-900mA, display at low brightness

These symptoms were observed and tested with at least 3 different >=2 Ampere chargers and micro-usb cables.

Extra questiong: I purchaced the Tablet from IGG backer, has my device any warranty left?

Thanks in advance :)