asked 2014-01-24 10:51:24 +0200
Because I didn't had a MicroSIM card at the time the jolla phone arrived. I search a bit and found this guide to convert your normal SIM card into a MicroSIM card:
http://www.solutios.com/simcutting/
I hope that's helpful for everyone that didn't know that this could be done.
Edit: Do this only transitionally in the time when you wait for a real MicroSIM card.
answered 2014-01-24 11:46:31 +0200
This may work, but be careful not to cut to much, or the Jolla won't recognize the MicroSIM. There is a small mechanical switch in the SIM-Slot, and I had problems with a converted MicroSIM because it first would not trigger that switch. Buying a new MicroSIM has the advantage that you get newer technology (I had to replace a SIM-card in the past because it was to old and MMS was not working).
answered 2014-01-24 13:03:36 +0200
If your provider offers good customer service, they will cut your card for you or copy the SIM card to a nano SIM. If not, well, time to think about changeing then?
Asked: 2014-01-24 10:51:24 +0200
Seen: 1,239 times
Last updated: Jan 24 '14
Amazon'll sell you a clipper device for just a few dollars to do exactly the same thing more reliably and safely.
strongm ( 2014-01-24 11:36:24 +0200 )editBut ordering that takes longer than ordering a new MicroSIM. My provider sends them out with no extra cost.
PyroDevil ( 2014-01-24 12:35:26 +0200 )editMy scissor-cut Saunalahti microSIM works very well. Real microSIMs from Saunalahti have had connection problems ;)
hana ( 2014-01-24 13:48:19 +0200 )editThat guide is only concerned with aligning the horizontal lines, they forgot the vertical lines. Well, if it worked...
hana ( 2014-01-24 13:50:40 +0200 )edit