asked 2020-04-28 23:08:05 +0300
Hi Sailors! This may be a duplicate, i couldnt find the exact same issue thow...please correct me if im wrong. When booting phone it just cannot find mobile network. I switch it for one minute on airplane mode, then back off airplane mode, and everything works again. I had this issue since Xa2 got supported,it seems Rokua didnt solve it...
answered 2020-04-29 20:13:19 +0300
hello @jovirkku ! here is mine but i am quite sure not to have repositories from openrepos! Screenshot_20200429_003.png
answered 2020-05-04 08:27:27 +0300
@jovirkku Just to describe the process, usually you boot up the phone, and then need to either wait for maybe 3mn until network arrives (maybe). or switch on/off airplane mode (and stay in airplane mode at least 30seconds).
The phone will then say after all this waiting 'network connectivity error' and then finaly show and connect to network..
I usually switch second SIM on and off to get it working.
The interesting thing is, that it is sometime working if PIN is entered immediately after boot. But even then it takes, I think, 1 min or more.
wosrediinanatour ( 2020-05-04 17:28:54 +0300 )editanswered 2020-04-29 17:34:17 +0300
@jovirkku - here is the output of ssu lr: ssu_lr.log
Hi and thanks. You seem to have the repo of Rinigus enabled. This repo contains the collectd utility which appears to be causing OS update failures [1], even connectivity after failing update attempts.
It would be great to learn if a) removing collectd or b) disabling the repo (devel-su; ssu dr openrepos-rinigus; pkcon refresh) could lead to a clean OS update.
Thx for the tipp. :/ This didn't help.Haven't collectd installed, but tried it anyway.
wosrediinanatour ( 2020-04-29 20:52:23 +0300 )edit@jovirkku One additional info: I checked using CSD tool (cell position) instantly after reboot: - Sometimes WCDMA carriers are detect, before LTE/GSMR - rsrp is between 100 and 120 (so rather bad the signal strength)
btw: I am not sure what the numbers mean (shouldn't they be negative?)
wosrediinanatour ( 2020-06-03 12:56:37 +0300 )editAsked: 2020-04-28 23:08:05 +0300
Seen: 412 times
Last updated: May 04 '20
tl:dr +1
As I do not reboot very often thisnmight be already since longer time like that.
But nowadays mybXA2 often just completely freezes and I need to hard boot it via Vol+/PWR. And after coming up again I have exactly the same symptom.
peterleinchen ( 2020-04-29 00:59:55 +0300 )editI have the same:
wosrediinanatour ( 2020-04-29 09:44:22 +0300 )editOften waiting helps if signal strength is good.
Sometimes I have to enable SIM card 2 (which I haven't - I have a SD), and disable 2 temporarily.
Anyone suffering from this issue, please add the output from the following command here:
jovirkku ( 2020-04-29 11:37:17 +0300 )edit