asked 2020-05-26 07:51:37 +0200
In devices manger, I have installed the driver successfully but in device tree it still show "Android?" I have try fastboot devices and it cant find my 10 plus device. I have tried to install the driver in Windows 10 v19xx, the problem is gone
answered 2020-06-30 22:58:35 +0200
Could you please test using Google USB Driver: https://developer.android.com/studio/run/win-usb.html via their link "Click here to download the Google USB Driver ZIP file (ZIP)". Downloaded file will be named usb_driver_r12-windows.zip
Choose "android_winusb.inf" and "Android Bootloader Interface" (instead of "sa0114adb.inf" and "Sony sa0114 ADB Interface") while following the steps in https://jolla.com/install-sailfish-x-xperia-10-windows/
It didn't work for me. Still the device is being shown as Android to me under Others section
santhoshmanikandan ( 2020-07-02 06:24:55 +0200 )editI am having this same issue; I need a way to install the fastboot driver and have windows recognize the xperia 10 plus.
Pedro Leite Fragoso ( 2020-07-08 01:36:28 +0200 )editanswered 2020-05-26 16:18:31 +0200
with the Tool Zadig 2.5 i was able to install Fastboot driver under Win 10 2004. Zadig throw a error at the end but after reboot pc the driver was installed and work.
Disclaimer: I do not take any responsibility if you follow what I write below.
I was able to use Zadig to install a USB-driver that made it possible for me to subsequently install Sailfish X on my XA2 Ultra. I cannot be sure that it will work for you, but I did this:
I installed Zadig and started it up with the phone connected in fastboot mode (fastboot mode is reached on an Xperia XA2 Ultra if you turn it on while gently pressing volume down as it is connected with USB to the computer - this information is in the installation "manual" that you read when installing Sailfish X).
Zadig recognizes that the connection to the phone is broken. I chose WinUSB.sys in the automatic driver list. Zadig installed the driver and then it worked.
NB! It did not install the Sony driver as specified by Jolla. It installed a generic Android driver and in the list of devices it does not say "SONY" But Android under "Universal Serial Bus Controllers".
Worked fine for me.
martinbook85 ( 2020-08-26 19:07:57 +0200 )editanswered 2020-06-25 08:11:26 +0200
Have someone tried using SOMC driver from Sony's flashtool?
Asked: 2020-05-26 07:51:37 +0200
Seen: 12,733 times
Last updated: Jun 30 '20
Can reproduce it.
santhoshmanikandan ( 2020-05-26 07:55:36 +0200 )editJolla & Sony need to check what is wrong here.
jovirkku ( 2020-06-09 14:05:40 +0200 )editJust thought i was nuts :D so this is a bug - hope this gets resolved soon. USB3.0 bug on linux and now this. Maybe i should buy a mac then...
daywalker ( 2020-06-22 17:08:12 +0200 )editI also noticed this problem some days ago. Fortunately, I still have a computer with the older version of Windows, with which the flash process was easily possible.
sailaway ( 2020-06-25 08:08:15 +0200 )editI'm having the same problem. I reverted it to Android 9 using Emma because I couldn't get MMS functionality to work. I wanted to make sure that I had everything functioing under Android, which it was.
However, now I'm stuck and can't seem to get the fastboot driver to take. It's doing exactly what the screen above shows. No fastboot, no reinstalling Sailfish.
I even reset Windows 10 on my laptop hoping that might fix it.
Oldmil ( 2020-07-05 05:27:39 +0200 )edit