We have moved to a new Sailfish OS Forum. Please start new discussions there.
3

X F5122 can't connect to mobile network

asked 2017-10-21 00:02:11 +0200

Dreej gravatar image

updated 2017-10-21 15:45:04 +0200

Hi sailors,

I installed Sfos on my F5122 today. works brillantly and the Xperia is a device like I always wanted running Sailfish. Unfortunately I have a big problem. The device can't connect to the network. I tried the biggest providers here in Germany (T-mobile and Vodafone) The device can detect the SIM but doesn't connect .

Has anyone an idea how to test the capabilities or to solve the problem? Does a reset restores Android or the naked Sailfish?

Thanks for your help in advance

edit: I just recognized that the phone doesn' even ask for the PIN

edit 2: running command from here http://talk.maemo.org/showpost.php?p=1535507&postcount=93 didn't solve the problem like reflashing sfos on the device as well... image description that's my ofono log...

Edit 3: back to Android my Sim cards are working perfectly. What can I do now? (sent from my Xperia X via LTE connection)

edit retag flag offensive close delete

Comments

1

Did you Install the latest Android 7 and boot the device to android fully once before flashing? Did Android see (and use) both SIMs? I had similar effects when I flashed SFOS without doing a full android boot on the latest firmware (34.3.A.0.238) first.

Did you do both the "hacks" form http://talk.maemo.org/showthread.php?p=1534540#post1534540 and http://talk.maemo.org/showpost.php?p=1535507&postcount=93

With these steps both SIMs are fully working on my F5122.

Resetting should reset SFOS to factory state, to get back to Andorid you'll have to flash an Android image

seiichiro0185 ( 2017-10-21 10:02:50 +0200 )edit

I can confirm that deleting the ofono dir and applying the hack for activating both sims works.

luchmhor ( 2017-10-21 11:37:44 +0200 )edit

Yes I followed the instructions of Jolla and I had the .0238. but... I wasn't able to check the sim on Android coh I had no nano sim till yesterday. I didn't try those hscks yet coz Im not so gamiliar with writing command lines nor did I ever tty to flash Android images coz I don't know how... but I will try the hacks first, hope someone can guide me a lil :) if that's not working I try to flash Android again to check the sim capabilities wizh the same request for help

Dreej ( 2017-10-21 11:39:00 +0200 )edit

1 Answer

Sort by » oldest newest most voted
3

answered 2017-10-30 15:42:43 +0200

ehakkarainen gravatar image

updated 2017-10-30 16:06:36 +0200

I have the same problem :( BEFORE trying maemo instructions... eg. do: (copied from Lanterns post and edited a bit - thanks to Lantern & others!)

(devel-su first) (also prefer nano so "pkcon install nano" for easier editing - ok - shame on me no using vi :) )

add these 3 lines to /default.prop

persist.multisim.config=dsds
persist.radio.multisim.config=dsds
ro.telephony.default_network=9,1

and these lines to the end of /etc/ofono/ril_subscription.conf

[ril_1]
socket=/dev/socket/rild2

pkcon install jolla-settings-networking-multisim

reboot phone = SIM registers just fine

edit flag offensive delete publish link more

Comments

I edit: disabling sim2 is not saved, but is enabled back after reboot (only small flaw)

ehakkarainen ( 2017-10-30 18:53:13 +0200 )edit

Thank. It's helped me

fcdk1982 ( 2018-04-04 15:34:13 +0200 )edit

Hi, any idea's how to edit these files on a windows machine? (sorry, i'm a beginner here)

someone ( 2018-04-24 21:26:38 +0200 )edit

unfortunately with the new release 2.2.0 this is not working anymore. i get a fatal error when installing the jolla-settings-networking-multisim. so no 2nd Sim offered anymore.

Does anybody know how to activate the 2nd Sim now with 2.2.0, which even should support 2nd SIM out of the Box?

meldolion ( 2018-06-06 11:31:07 +0200 )edit
Login/Signup to Answer

Question tools

Follow
5 followers

Stats

Asked: 2017-10-21 00:02:11 +0200

Seen: 1,123 times

Last updated: Oct 21 '17